CA SR part out, OE and aftermarket stuff.

[MrChow]

Just reposting up my part out thread. Parting out my SR. Everything off the motor is clean. I'm not rushing to sell so don't be trying to low balling me hard.

This post WILL updated has soon has something is sold or on pending. So don't ask me if something is available.
If you have question PLEASE POST IT HERE.
Since people cannot read. I will response faster if you REPLY on here it goes straight to my phone.
Now if you seriously wanting something reply here and I'll PM you.

I am willing to ship. The bigger or heavier the item the more $$ to ship.

I'm pretty firm with these prices, but the more you want you get together the better deal I'll give you.
Low ballers will be ignored.


HKS 256/256 Step 1 Cams intake/exhaust - 400 *new 540*
Brian Crower valve spring & Retainer | Intake/Exhaust Valves - 375 obo Sold
Bare Head w/valve cover - 150 (will not sale till I sale something else) Sold
OEM Lifters, Rockers etc - 175

Tomei 555cc Injectors w/rail - 350 Sold
Freddy intake manifold w/iacv/tps/tb all working great condition- 250

ARP head studs - 100 Sold


Freddy intake manifold w/iacv/tps/tb all working great condition- 250
Q45 TB - 85 Sold

Nismo Engine mounts - 100 Sold
Intercooler core -Sold
IC piping for S14 w/Knock off HKS bov - 120
Garret GT2871R a/f .64 - Sold
Stock exhaust manifold - Sold
Tomei 555cc Injectors w/rail - 350 Sold
Trust down pipe w/weld on bunge for wideband - 150
Greddy oil pan - 250 Sold
Peak Performance Trans Mount Black - 40 Sold
Peak Performance Trans Mount Red beat up - 25

J4 PFC - Tuned by Steven Shadow w/all of this about 340whp @16psi (will provide the map when sold) - 700
Denso 3 bar map - 80 Sold
S13 SR to S14 wiring harness - 100

Blitz SBC-ID - 350 Sold
Blitz Powermeter ID - 50


Innovate LM-2 Digital Air/Fuel Ratio Wideband Meter- 200 sold
Koyo aluminum radiator + Flexlite shroud + 2 T fal fans + Samco silicone hose upper & lower - 300 Sold

Rest of the motor stuff
S13 97 SR20DET Type X Blacktop
Block bare - 150 Sold
Head bare Sold
Pistol/Rods - Sold
Crank - Sold
CAS - 100
Coil packs - 140
SR S13 blacktop Power Steer and bracket Sold

If there something you need from an S13 SR and it isn't list I have it. So just POST to ask me.
I DO NOT have:
MAF
S14 SR stuff
or KA stuff
or any tranny stuff
SO STOP ASKING.

[crewchief05]

you have a KA speed sensor M/T? if so how much?

[MrChow]

Sorry I don't have one

[MrChow]

End of hump day bump.

[zbarsuglia]

Have the sr motor mount brackets?

[MrChow]

Originally Posted by zbarsuglia

Have the sr motor mount brackets?

Yes. The ones in that last pic of the block right?

[zbarsuglia]

Yes sir I only need the passenger side one but will buy both if absolutely necessary

[jhony]

Do you have a s13 SR oil air seperator? Lmk if you do thanks!

[MrChow]

Originally Posted by zbarsuglia

Yes sir I only need the passenger side one but will buy both if absolutely necessary

Rather sell it has a whole or if someone wants just the bare block.

Originally Posted by jhony

Do you have a s13 SR oil air seperator? Lmk if you do thanks!

Greedy oil catch can is what I had for that

[zbarsuglia]

I will buy the pair.

[takuymmt]

do u have a maf?

[MrChow]

Originally Posted by zbarsuglia

I will buy the pair.

Okay. I'll pm you when I get home.

Originally Posted by takuymmt

do u have a maf?

No. Why there's a map for sale.

[ohhdude]

Hi, can u ship the greddy oil pan to Turkey 38030 ? If yes what will be the total cost including shippnig?

[MrChow]

Originally Posted by ohhdude

Hi, can u ship the greddy oil pan to Turkey 38030 ? If yes what will be the total cost including shippnig?

Yeah I can. I'll pm you with the quote in an hour

[mikeylax]

Interested in harness shipped to 77459. Is it a wiring specialties or modified oem

[MrChow]

Originally Posted by mikeylax

Interested in harness shipped to 77459. Is it a wiring specialties or modified oem

Shipped to you would around 16. Its modified OE harness. Also it was made for a s13 blacktop so its wired for map.

[LIFTEDzenki]

Happen to have the starter laying around?

[MrChow]

Originally Posted by LIFTEDzenki

Happen to have the starter laying around?

No.

Why not get one from your local auto part store?

[Backwards_Entry]

You wouldn't happen to have any S13 SR coil packs laying around do you?

[MrChow]

Yeah I posted the price and everything.

[ohhdude]

Payment has just sent for Greddy oil pan. Thanks

[MrChow]

Originally Posted by ohhdude

Payment has just sent for Greddy oil pan. Thanks

Got it thanks. Ty for relying here much easier to reply with the app. OP updated.

[Twofortay]

Will you take 30 for the exhaust manifold it's just a bit of a drive to get it.

[MrChow]

Originally Posted by Twofortay

Will you take 30 for the exhaust manifold it's just a bit of a drive to get it.

I'm probably going to Oakland soon if that's better for you
If not I'd do 35 picked up.

[mikefc]

How much shipped for the CAS to 60046?

[MrChow]

Originally Posted by mikefc

How much shipped for the CAS to 60046?

Sorry for the slow response. Just wake up.
Since actually read the thread. 105 for u

[lucas240sx]

do you have stock catch can and vac lines from intake mani?

[MrChow]

Originally Posted by lucas240sx

do you have stock catch can and vac lines from intake mani?

No stock catch can and aftermarket ones. what lines are we talking about?

[lucas240sx]

No worries
Do you have the stock inlet maf tube?

[MrChow]

Originally Posted by lucas240sx

No worries
Do you have the stock inlet maf tube?

No. Why there's a map sensor for sale and no maf for sale.