CA S14 2JZ Project CHEAP/Open to Trades - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

PROJECT240SX · 09-30-2012, 10:38 PM

Hey guys,

I purchased this car back 02/03 down in San Diego. It was originally an automatic but I did a 5spd swap on it, and eventually went KA-T. The motor let go within 200mi of it being KA-T. After that I decided to pull the motor and tranny and planned on going with a 2JZ swap. I pulled the interior and still have all of the pieces for it. I also removed the front end and have a cleaner white front end for it, minus headlights, turn signals, and hood.

I thought I could hang onto this car to finish it but with family, school and my work I have absolutely zero time to work on the car, so I do not see myself finishing it in the future.

Car:
95 240SX
125,xxx Miles on Chassis
No sunroof
Power windows
Power locks
Battery relocated to trunk
Sound deadening material removed
Z32 N/A VLSD
Walbro 255lph fuel pump

Extras
Nardi 330mm Deep Corn Steering Wheel
Sparco EVO2 Race Seat
Precision FMIC AS1025 600HP (BNIB)
DriftMotion 3" Intercooler Piping Kit (BNIB)
Mishimoto S14 SR Radiator (BNIB)

Engine: (Installed for test fitting)
2JZ Aristo engine
USDM Supra water pump
OEM Toyota serpentine belt
OEM Toyota Timing Belt
No ECU

Transmission/Drivetrain:
R154
1JZ Bell Housing
ARP Tranny to Engine Bolts
OEM Toyota 1JZ Flywheel
ARP Flywheel Bolts
OEM Toyota Clutch Release Hub Kit
DriftMotion Stage 2 Clutch
R154 Clutch Slave Cylinder
Steel Braided Clutch Hose
Custom Extended Shifter Housing

Suspension/BrakesWheels
5 lug swap (no ebrake assembly)
300zx front and rear calipers
300zx NA wheels
Tires are flat

Exterior:
Purple (decent condition)
White front end (not installed, no hood)

Swap kit:
Tech2 crossmember
Tech2 mounts
Custom tranny mount
Custom Steel Driveshaft

Wiring:
S14 KA harness (Excellent Condition)
Aristo harness (Excellent Condition)

I have over $5000 just in the swap and parts that I have for this car. This is a great project car for some one looking to take on a project and has the free time.

Located in Salinas,CA

SOLD

You will need a trailer to pick up the car

Excuse the dust, webs and dirt I had the car sitting outside in the back of my house before bringing it in to work on it.

Sr20KoukiS14 · 09-30-2012, 10:55 PM

$48000 sounds reasonable lol.

Twinkies! · 09-30-2012, 11:33 PM

48 grand? Lol

s14gmo · 10-01-2012, 12:35 AM

will you take 30gs dont want to lowball you lol glws

Fedex_562 · 10-01-2012, 12:54 AM

4800?........

PROJECT240SX · 10-01-2012, 06:02 AM

Quote:

Originally Posted by Sr20KoukiS14

$48000 sounds reasonable lol.

Quote:

Originally Posted by Twinkies!

48 grand? Lol

Quote:

Originally Posted by s14gmo

will you take 30gs dont want to lowball you lol glws

Quote:

Originally Posted by Fedex_562

4800?........

Pricing has been corrected, refer to original post.

d_nice · 10-01-2012, 09:12 AM

looks like alot of work needs to be done

Boost-Fiend · 10-01-2012, 10:10 AM

what kind of trades u lookin for?

PROJECT240SX · 10-01-2012, 12:18 PM

Quote:

Originally Posted by Boost-Fiend

what kind of trades u lookin for?

Open to any and all trades as I will probably sell whatever it is.

Boost-Fiend · 10-01-2012, 07:08 PM

How bout a rb swapped s13 coupe Silvia front widebody 5 lug all the suspension full cage?

Spencer dougherty · 10-02-2012, 12:31 AM

who ever picks this up.. i can complete the swap for a few 100 buxs if need.. good deal on this..

alisak · 10-02-2012, 03:44 PM

would you part out?

RitchieBoost914 · 10-02-2012, 11:21 PM

If you decide to part it out please let me know, im interested in a few things you have.
My email: [email protected]

PROJECT240SX · 10-02-2012, 11:30 PM

Quote:

Originally Posted by alisak

would you part out?

Quote:

Originally Posted by RitchieBoost914

If you decide to part it out please let me know, im interested in a few things you have.
My email: [email protected]

Not interested in parting out, only way I would consider parting the car out is if someone takes the engine/tranny package first. Unfortunately, everyone that PM's me is interested in small parts or the driveshaft.

I would rather continue to let the car collect dust in the garage than to take off little pieces here and there to sell until the car is gone.

RitchieBoost914 · 10-02-2012, 11:45 PM

Email me a price for the motor/trans combo with and without engine harness, thanks alot

alisak · 10-05-2012, 05:38 PM

Quote:

Originally Posted by RitchieBoost914

Email me a price for the motor/trans combo with and without engine harness, thanks alot

if he takes the motor/trans ill take the front mount, piping, drive shaft.

alisak · 10-14-2012, 11:15 AM

bump it up

Syncade · 10-24-2012, 11:01 AM

Im interested in motor and trans (would need shipped obviously). PM me if youd be interested (id want motor, trans, and harness's)

alisak · 10-24-2012, 01:03 PM

pm me back

PROJECT240SX · 10-24-2012, 10:13 PM

Car has been sold.

09-30-2012, 10:38 PM	#1
PROJECT240SX Zilvia Junkie Join Date: Jun 2002 Location: Salinas, CA Age: 42 Posts: 334 Trader Rating: (8) Feedback Score: 8 reviews	S14 2JZ Project CHEAP/Open to Trades Hey guys, I purchased this car back 02/03 down in San Diego. It was originally an automatic but I did a 5spd swap on it, and eventually went KA-T. The motor let go within 200mi of it being KA-T. After that I decided to pull the motor and tranny and planned on going with a 2JZ swap. I pulled the interior and still have all of the pieces for it. I also removed the front end and have a cleaner white front end for it, minus headlights, turn signals, and hood. I thought I could hang onto this car to finish it but with family, school and my work I have absolutely zero time to work on the car, so I do not see myself finishing it in the future. Car: 95 240SX 125,xxx Miles on Chassis No sunroof Power windows Power locks Battery relocated to trunk Sound deadening material removed Z32 N/A VLSD Walbro 255lph fuel pump Extras Nardi 330mm Deep Corn Steering Wheel Sparco EVO2 Race Seat Precision FMIC AS1025 600HP (BNIB) DriftMotion 3" Intercooler Piping Kit (BNIB) Mishimoto S14 SR Radiator (BNIB) Engine: (Installed for test fitting) 2JZ Aristo engine USDM Supra water pump OEM Toyota serpentine belt OEM Toyota Timing Belt No ECU Transmission/Drivetrain: R154 1JZ Bell Housing ARP Tranny to Engine Bolts OEM Toyota 1JZ Flywheel ARP Flywheel Bolts OEM Toyota Clutch Release Hub Kit DriftMotion Stage 2 Clutch R154 Clutch Slave Cylinder Steel Braided Clutch Hose Custom Extended Shifter Housing Suspension/BrakesWheels 5 lug swap (no ebrake assembly) 300zx front and rear calipers 300zx NA wheels Tires are flat Exterior: Purple (decent condition) White front end (not installed, no hood) Swap kit: Tech2 crossmember Tech2 mounts Custom tranny mount Custom Steel Driveshaft Wiring: S14 KA harness (Excellent Condition) Aristo harness (Excellent Condition) I have over $5000 just in the swap and parts that I have for this car. This is a great project car for some one looking to take on a project and has the free time. Located in Salinas,CA SOLD You will need a trailer to pick up the car Excuse the dust, webs and dirt I had the car sitting outside in the back of my house before bringing it in to work on it. Last edited by PROJECT240SX; 10-24-2012 at 10:12 PM.. Reason: Car has been sold

09-30-2012, 10:55 PM	#2
Sr20KoukiS14 Leaky Injector Join Date: Feb 2010 Location: Missouri Age: 33 Posts: 141 Trader Rating: (0) Feedback Score: 0 reviews	$48000 sounds reasonable lol. __________________

10-24-2012, 11:01 AM	#18
Syncade Zilvia FREAK! Join Date: Sep 2007 Location: Pittsburgh Posts: 1,250 Trader Rating: (1) Feedback Score: 1 reviews	Im interested in motor and trans (would need shipped obviously). PM me if youd be interested (id want motor, trans, and harness's) __________________ Jets > Cars

09-30-2012, 11:33 PM	#3
Twinkies! Zilvia Junkie Join Date: Apr 2012 Location: Rosamond California Posts: 546 Trader Rating: (2) Feedback Score: 2 reviews	48 grand? Lol

10-01-2012, 12:35 AM	#4
s14gmo Zilvia FREAK! Join Date: Sep 2007 Location: San diego CA / Charlotte NC Age: 35 Posts: 1,195 Trader Rating: (29) Feedback Score: 29 reviews	will you take 30gs dont want to lowball you lol glws

10-01-2012, 12:54 AM	#5
Fedex_562 Zilvia Junkie Join Date: Apr 2010 Location: Whittier, CA Age: 32 Posts: 324 Trader Rating: (7) Feedback Score: 7 reviews	4800?........

10-01-2012, 09:12 AM	#7
d_nice Post Whore! Join Date: Aug 2010 Location: florida Age: 43 Posts: 3,595 Trader Rating: (39) Feedback Score: 39 reviews	looks like alot of work needs to be done

10-01-2012, 10:10 AM	#8
Boost-Fiend Zilvia Junkie Join Date: Feb 2007 Location: las vegas Age: 37 Posts: 420 Trader Rating: (0) Feedback Score: 0 reviews	what kind of trades u lookin for?

10-01-2012, 07:08 PM	#10
Boost-Fiend Zilvia Junkie Join Date: Feb 2007 Location: las vegas Age: 37 Posts: 420 Trader Rating: (0) Feedback Score: 0 reviews	How bout a rb swapped s13 coupe Silvia front widebody 5 lug all the suspension full cage?

10-02-2012, 12:31 AM	#11
Spencer dougherty Post Whore! Join Date: Feb 2007 Location: Santa Ana CA SideWays Performance 1(714)330-0021 Age: 41 Posts: 2,554 Trader Rating: (65) Rides Gallery: Spencer dougherty Feedback Score: 65 reviews	who ever picks this up.. i can complete the swap for a few 100 buxs if need.. good deal on this..

10-02-2012, 03:44 PM	#12
alisak Leaky Injector Join Date: Jul 2009 Location: Chicago Posts: 59 Trader Rating: (2) Feedback Score: 2 reviews	would you part out?

10-02-2012, 11:21 PM	#13
RitchieBoost914 Join Date: Jul 2012 Location: Yonkers NY Posts: 8 Trader Rating: (0) Feedback Score: 0 reviews	If you decide to part it out please let me know, im interested in a few things you have. My email: [email protected]

10-02-2012, 11:45 PM	#15
RitchieBoost914 Join Date: Jul 2012 Location: Yonkers NY Posts: 8 Trader Rating: (0) Feedback Score: 0 reviews	Email me a price for the motor/trans combo with and without engine harness, thanks alot

10-14-2012, 11:15 AM	#17
alisak Leaky Injector Join Date: Jul 2009 Location: Chicago Posts: 59 Trader Rating: (2) Feedback Score: 2 reviews	bump it up

10-24-2012, 01:03 PM	#19
alisak Leaky Injector Join Date: Jul 2009 Location: Chicago Posts: 59 Trader Rating: (2) Feedback Score: 2 reviews	pm me back

10-24-2012, 10:13 PM	#20
PROJECT240SX Zilvia Junkie Join Date: Jun 2002 Location: Salinas, CA Age: 42 Posts: 334 Trader Rating: (8) Feedback Score: 8 reviews	Car has been sold.