CA PART OUT!: Weld JP s14 Silvia Track Car...Officially! - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Knapik · 01-29-2012, 02:20 PM

PARTS ARE NOW AVAILABLE FOR PICK UP!!!!

this is just a quick list of things. if there is something not specifically listed and you see it on the car or know it is there please pm me. i will try and update regularly.

Prices DO NOT include shipping, or paypal fees.
I do not mind shipping, but please expect to pay for shipping.

ENGINE: $7000 obo picked up
Nissan 2.0L SR20DET
Block Bored 1mm Over
Balanced Crank
Trust TD06 20G Turbo
WELD Machined/Polished Head
WELD Spark Plug Cover
Trust Wastegate
Trust Exhaust Manifold
Z32 /300ZX Pistons
A'PEXi Camshafts
A'PEXi Cam Gears
A'PEXi 1.1mm Head Gasket
A'PEXi 550cc Fuel Injectors
A'PEXi Fuel Pressure Regulator
JUN Water Pump

Engine Related:
Z32 /300ZX MAF with Air Intake: SOLD
A'PEXi Catalytic Converter: $500
Trust Oil Cooler $650

Skyline R33 Fuel Pump: $200
Sun Automobile Hot Earth Hyper Ground System: SOLD
Sun Automobile Hyper Voltage System: $80
Shrouded Dual Flex-A-Lite Fans Located In Trunk: $250
Trust Profec B Boost Controller: $250
Trust Digital Speed Meter: $150
EXEDY Stage 4 Twin Plate Ceramic Clutch Kit (Flywheel Included): $1200
S14 SR transmission: $250
Nismo SSS Differential. $700

SUSPENSION
Zeal Endless X Coilovers: $2500
Ikeya Formula Tension Rod: $260
Ikeya Formula Tie Rods: $100
Ikeya Formula Tie Rod Ends: $300
Ikeya Formula Toe Rod: $200
Ikeya Formula Traction Rod: $200
Ikeya Formula Rear Camber Arm: $650
Ikeya Formula Front Lower Control Arms: $600
Ikeya Formula Rear Lower Control Arms: $600
Custom Weld Front Strut Bar: $250

WELD Custom Strut Tower Brace: $200

WHEELS
AME Circlar Spec R 17x9 +15 front 18x10 +15 rear $1500 w/ out tires $1800 with tires

TIRES
Yokohama Advan AD48's

AERO PARTS
Full Vertex Aero: $1200
A'PEXi Extreme Adjustable CF Wing: $1200
Craft Square CF Mirrors: $350
Forward-Tilt Vented Hood: $1400
Vented Trunk: $600
Lexan Front Windshield: $600
Lexan Rear Windshield: $600
Lexan Rear Quarter Windows: $150 each
Lexan Door Windows (driver and passenger side roll up and down also): $350 each

INTERIOR
Sparco 'Stripe' Pedals: $60
Sparco 'Globe' Shift Knob: $60
Sparco Racing 6 pt Harness: $250
Greddy Guages SOLD
Greddy Link Control Unit: SOLD
Oil Pressure: SOLD
Oil Temp: SOLD
Boost: SOLD
Water Temp: SOLD
Fuel Pressure: SOLD
Exhaust Temp: SOLD
Autometer Pro-Comp Tachometer - 5" 11k RPM limit: $165

Still Updating...theres just an overwhelming amount of hi quality parts

In case the pictures do not load please follow this link to the photobucket....it seems that the pictures are getting a good amount of views, and you are limited to how many times by photobucket.

http://photobucket.com/WeldS14

SMM · 01-29-2012, 03:25 PM

Pme me a price shipped for the z32 maf

Howie Felter Snatch · 01-29-2012, 06:24 PM

Holy smokes! This thing is so badd-ass!! Why on earth would you part this baby out? Omg?!???!?!

roboticnissan · 01-29-2012, 06:29 PM

This car should be kept.

phi_ho1 · 01-29-2012, 09:37 PM

where are u in westminster im in with the s14sr tranny looking to pick it up

zenki_ftw · 01-30-2012, 05:00 AM

How much for the headlights shipped to 77086

hardtime21 · 01-30-2012, 09:44 AM

How much for the car in it's entirety?

89JDM240sx · 01-30-2012, 09:56 AM

Beautiful car... IMO I would keep this! But what are you cooling in the trunk?

gtouch_nissan · 01-30-2012, 10:24 AM

It had the radiator in the trunk^

Knapik · 01-30-2012, 04:02 PM

im parting it out because no one had the balls to pick it up

the car is no longer in one piece so it does not have a single unit price

i would have loved to keep it as a whole but unfortunately the times call for it to be parted.

hacellular · 01-30-2012, 08:05 PM

You should have waited till the summer. parting it is harder and can take a long time plus lots of your time... that sucks man. wish you the best I wish i had the money i would have bought it right away. I am trying to sell my bimmer, as soon as it sell I would have bought your car.... car was sick man sorry to see it go like that...

Knapik · 01-30-2012, 09:59 PM

i want to make perfectly clear. i know this car was awesome, but there are lot of ppl that would buy it, but when it comes to paying, all of the sudden they dont want to for thousands of reasons. believe me when i say that parting it sucked. and getting offers like 10k and 13k for it gets annoying after awhile. they are insulting and a waste of my time. the car has been up for sale for almost a year. so its not like i didnt give it some time.

but if anyone wants to revive it, the bare chassis is for sale. but if not one picks up the chassis, i will cut the cage out and sell it, as well as the quarter panels, and anything else.
right hand drive conversion guys! i know you need the rack! and lines.

the car is COMPLETELY stripped and all parts are ready for pick up.

thanks guys!
adam k

*TougeLabs* · 01-31-2012, 08:13 PM

How much for the chassis ?

Knapik · 01-31-2012, 09:20 PM

$2500 for the chassis

mike_holes · 01-31-2012, 09:40 PM

Id say in whole its worth no less than 50,000... Parts and man hrs on the build...

Flicktitty · 01-31-2012, 09:53 PM

unreal piece of s-chassis history being parted out. GLWS

DallasTXjdm · 01-31-2012, 10:15 PM

You have a PM my friend.

brn2slid · 01-31-2012, 10:16 PM

Are the coilovers custom? Last I knew they are like 2500 brand new for the type x. More details on those please

STEEZxIT · 02-01-2012, 12:00 AM

what a fLucking masterpiece.

Knapik · 02-01-2012, 12:10 AM

Quote:

Originally Posted by brn2slid

Are the coilovers custom? Last I knew they are like 2500 brand new for the type x. More details on those please

im actually going to confirm with Endless tomorrow on the coilovers, because i actually think they are the func-d coilover with an inverted front mono tube.

will keep this updated.

thanks
adam k

DallasTXjdm · 02-01-2012, 07:04 AM

Hey Adam, can you confirm that you received my PayPal payment for the passenger Kouki tail light? I sent the payment last night but never heard back from you. Please advise.

heiyuu · 02-01-2012, 04:49 PM

Ikeya Formula Tension Rod: $260
Ikeya Formula Tie Rods: $100
Ikeya Formula Tie Rod Ends: $300
Ikeya Formula Front Lower Control Arms: $600
Ikeya Formula Rear Lower Control Arms: $600

I need these, but asking so much!

Knapik · 02-01-2012, 10:31 PM

Quote:

Originally Posted by heiyuu

Ikeya Formula Tension Rod: $260
Ikeya Formula Tie Rods: $100
Ikeya Formula Tie Rod Ends: $300
Ikeya Formula Front Lower Control Arms: $600
Ikeya Formula Rear Lower Control Arms: $600

I need these, but asking so much!

sorry man, you gotta pay to play! plus ikeya formula isnt easy to get for cheap

pmed you

J.Muilenb · 02-01-2012, 10:46 PM

sell your oil filter relocation kit? if so how much shipped to 85284. thanks.

Knapik · 02-01-2012, 10:48 PM

it is a greddy oil cooler kit with a relocated oil block...are you still interested?

*TougeLabs* · 02-01-2012, 11:23 PM

What's coming with the chassis ? Dash cage body etc ?

Imarvin240 · 02-03-2012, 12:40 AM

looks like it was a fun car, sucks no one picked it up.

Knapik · 02-03-2012, 02:27 PM

Quote:

Originally Posted by TougeLabs

What's coming with the chassis ? Dash cage body etc ?

depends on what you want left with it.
things can get put back on. right now the lexan rear, quarters, doors with lexan power windows, steering column, rack, power steering assembly, gas tank, and pedals are left

Knapik · 02-06-2012, 10:49 PM

well since no one wants the chassis alone, ill probably be cutting the cage out this weekend. ill take offers on any other part that can be cut off as well. rear quarter panels, roof? doors etc

OLDSCHOOLRICE · 02-12-2012, 10:43 AM

Is the Sparco harness made my Sabelt or Schroth?

What is the expiration year?

01-29-2012, 02:20 PM	#1
Knapik Zilvia FREAK! Join Date: Jun 2006 Location: westminster Posts: 1,018 Trader Rating: (36) Feedback Score: 36 reviews	PART OUT!: Weld JP s14 Silvia Track Car...Officially! PARTS ARE NOW AVAILABLE FOR PICK UP!!!! this is just a quick list of things. if there is something not specifically listed and you see it on the car or know it is there please pm me. i will try and update regularly. Prices DO NOT include shipping, or paypal fees. I do not mind shipping, but please expect to pay for shipping. ENGINE: $7000 obo picked up Nissan 2.0L SR20DET Block Bored 1mm Over Balanced Crank Trust TD06 20G Turbo WELD Machined/Polished Head WELD Spark Plug Cover Trust Wastegate Trust Exhaust Manifold Z32 /300ZX Pistons A'PEXi Camshafts A'PEXi Cam Gears A'PEXi 1.1mm Head Gasket A'PEXi 550cc Fuel Injectors A'PEXi Fuel Pressure Regulator JUN Water Pump Engine Related: Z32 /300ZX MAF with Air Intake: SOLD A'PEXi Catalytic Converter: $500 Trust Oil Cooler $650 Skyline R33 Fuel Pump: $200 Sun Automobile Hot Earth Hyper Ground System: SOLD Sun Automobile Hyper Voltage System: $80 Shrouded Dual Flex-A-Lite Fans Located In Trunk: $250 Trust Profec B Boost Controller: $250 Trust Digital Speed Meter: $150 EXEDY Stage 4 Twin Plate Ceramic Clutch Kit (Flywheel Included): $1200 S14 SR transmission: $250 Nismo SSS Differential. $700 SUSPENSION Zeal Endless X Coilovers: $2500 Ikeya Formula Tension Rod: $260 Ikeya Formula Tie Rods: $100 Ikeya Formula Tie Rod Ends: $300 Ikeya Formula Toe Rod: $200 Ikeya Formula Traction Rod: $200 Ikeya Formula Rear Camber Arm: $650 Ikeya Formula Front Lower Control Arms: $600 Ikeya Formula Rear Lower Control Arms: $600 Custom Weld Front Strut Bar: $250 WELD Custom Strut Tower Brace: $200 WHEELS AME Circlar Spec R 17x9 +15 front 18x10 +15 rear $1500 w/ out tires $1800 with tires TIRES Yokohama Advan AD48's AERO PARTS Full Vertex Aero: $1200 A'PEXi Extreme Adjustable CF Wing: $1200 Craft Square CF Mirrors: $350 Forward-Tilt Vented Hood: $1400 Vented Trunk: $600 Lexan Front Windshield: $600 Lexan Rear Windshield: $600 Lexan Rear Quarter Windows: $150 each Lexan Door Windows (driver and passenger side roll up and down also): $350 each INTERIOR Sparco 'Stripe' Pedals: $60 Sparco 'Globe' Shift Knob: $60 Sparco Racing 6 pt Harness: $250 Greddy Guages SOLD Greddy Link Control Unit: SOLD Oil Pressure: SOLD Oil Temp: SOLD Boost: SOLD Water Temp: SOLD Fuel Pressure: SOLD Exhaust Temp: SOLD Autometer Pro-Comp Tachometer - 5" 11k RPM limit: $165 Still Updating...theres just an overwhelming amount of hi quality parts In case the pictures do not load please follow this link to the photobucket....it seems that the pictures are getting a good amount of views, and you are limited to how many times by photobucket. http://photobucket.com/WeldS14 __________________ not anti-drift, just pro-grip Last edited by Knapik; 02-11-2012 at 11:30 PM..

01-29-2012, 06:29 PM	#4
roboticnissan Nissanaholic! Join Date: Mar 2007 Location: SOCAL/NORCAL Age: 35 Posts: 1,867 Trader Rating: (12) Feedback Score: 12 reviews	This car should be kept. __________________

01-29-2012, 09:37 PM	#5
phi_ho1 Nissanaholic! Join Date: Jun 2008 Location: CALI - OC 714 Garden Grove Posts: 1,847 Trader Rating: (57) Feedback Score: 57 reviews	where are u in westminster im in with the s14sr tranny looking to pick it up __________________ Beware for REF tickets

01-30-2012, 09:56 AM	#8
89JDM240sx Zilvia Member Join Date: Jan 2012 Location: Newark Nj Posts: 235 Trader Rating: (0) Feedback Score: 0 reviews	Beautiful car... IMO I would keep this! But what are you cooling in the trunk? __________________ Boost makes me sooooooo happy!

01-30-2012, 04:02 PM	#10
Knapik Zilvia FREAK! Join Date: Jun 2006 Location: westminster Posts: 1,018 Trader Rating: (36) Feedback Score: 36 reviews	im parting it out because no one had the balls to pick it up the car is no longer in one piece so it does not have a single unit price i would have loved to keep it as a whole but unfortunately the times call for it to be parted. __________________ not anti-drift, just pro-grip

01-29-2012, 03:25 PM	#2
SMM Zilvia Addict Join Date: Sep 2009 Location: tampa Age: 36 Posts: 819 Trader Rating: (26) Feedback Score: 26 reviews	Pme me a price shipped for the z32 maf

01-29-2012, 06:24 PM	#3
Howie Felter Snatch Zilvia Member Join Date: Aug 2011 Location: USA/Australia/Japan Posts: 223 Trader Rating: (2) Feedback Score: 2 reviews	Holy smokes! This thing is so badd-ass!! Why on earth would you part this baby out? Omg?!???!?!

01-30-2012, 05:00 AM	#6
zenki_ftw Leaky Injector Join Date: Nov 2011 Location: Houston Texas Age: 30 Posts: 127 Trader Rating: (0) Feedback Score: 0 reviews	How much for the headlights shipped to 77086

01-30-2012, 09:44 AM	#7
hardtime21 Zilvia Member Join Date: Mar 2010 Location: M-Town Age: 45 Posts: 249 Trader Rating: (19) Feedback Score: 19 reviews	How much for the car in it's entirety?

01-30-2012, 10:24 AM	#9
gtouch_nissan Zilvia Member Join Date: Jan 2010 Location: Orange County Posts: 288 Trader Rating: (7) Feedback Score: 7 reviews	It had the radiator in the trunk^

01-30-2012, 08:05 PM	#11
hacellular Leaky Injector Join Date: Oct 2009 Location: Central NJ Age: 43 Posts: 93 Trader Rating: (0) Feedback Score: 0 reviews	You should have waited till the summer. parting it is harder and can take a long time plus lots of your time... that sucks man. wish you the best I wish i had the money i would have bought it right away. I am trying to sell my bimmer, as soon as it sell I would have bought your car.... car was sick man sorry to see it go like that...

01-30-2012, 09:59 PM	#12
Knapik Zilvia FREAK! Join Date: Jun 2006 Location: westminster Posts: 1,018 Trader Rating: (36) Feedback Score: 36 reviews	i want to make perfectly clear. i know this car was awesome, but there are lot of ppl that would buy it, but when it comes to paying, all of the sudden they dont want to for thousands of reasons. believe me when i say that parting it sucked. and getting offers like 10k and 13k for it gets annoying after awhile. they are insulting and a waste of my time. the car has been up for sale for almost a year. so its not like i didnt give it some time. but if anyone wants to revive it, the bare chassis is for sale. but if not one picks up the chassis, i will cut the cage out and sell it, as well as the quarter panels, and anything else. right hand drive conversion guys! i know you need the rack! and lines. the car is COMPLETELY stripped and all parts are ready for pick up. thanks guys! adam k __________________ not anti-drift, just pro-grip

01-31-2012, 08:13 PM	#13
TougeLabs Premium Member Join Date: Jan 2007 Location: New York Age: 38 Posts: 1,570 Trader Rating: (7) Feedback Score: 7 reviews	How much for the chassis ?

01-31-2012, 09:20 PM	#14
Knapik Zilvia FREAK! Join Date: Jun 2006 Location: westminster Posts: 1,018 Trader Rating: (36) Feedback Score: 36 reviews	$2500 for the chassis __________________ not anti-drift, just pro-grip

01-31-2012, 09:40 PM	#15
mike_holes Zilvia Member Join Date: Jun 2010 Location: san bernardino ca Age: 43 Posts: 180 Trader Rating: (3) Feedback Score: 3 reviews	Id say in whole its worth no less than 50,000... Parts and man hrs on the build...

01-31-2012, 09:53 PM	#16
Flicktitty Post Whore! Join Date: Apr 2007 Location: Wisconsin Age: 37 Posts: 3,685 Trader Rating: (13) Feedback Score: 13 reviews	unreal piece of s-chassis history being parted out. GLWS __________________ 2JZ-GTE Swapped S13 Coupe - 1994 Supra Turbo

01-31-2012, 10:15 PM	#17
DallasTXjdm Zilvia Junkie Join Date: Sep 2011 Location: USA Posts: 581 Trader Rating: (41) Feedback Score: 41 reviews	You have a PM my friend.

01-31-2012, 10:16 PM	#18
brn2slid Nissanaholic! Join Date: Jan 2007 Location: Kansas Posts: 1,841 Trader Rating: (17) Feedback Score: 17 reviews	Are the coilovers custom? Last I knew they are like 2500 brand new for the type x. More details on those please

02-01-2012, 12:00 AM	#19
STEEZxIT Zilvia FREAK! Join Date: Oct 2009 Location: socal, man! Posts: 1,261 Trader Rating: (11) Feedback Score: 11 reviews	what a fLucking masterpiece. __________________ @dangerdamian

02-01-2012, 07:04 AM	#21
DallasTXjdm Zilvia Junkie Join Date: Sep 2011 Location: USA Posts: 581 Trader Rating: (41) Feedback Score: 41 reviews	Hey Adam, can you confirm that you received my PayPal payment for the passenger Kouki tail light? I sent the payment last night but never heard back from you. Please advise.

02-01-2012, 04:49 PM	#22
heiyuu Zilvia Addict Join Date: Jun 2007 Location: winnipeg Age: 38 Posts: 875 Trader Rating: (6) Feedback Score: 6 reviews	Ikeya Formula Tension Rod: $260 Ikeya Formula Tie Rods: $100 Ikeya Formula Tie Rod Ends: $300 Ikeya Formula Front Lower Control Arms: $600 Ikeya Formula Rear Lower Control Arms: $600 I need these, but asking so much! __________________

02-01-2012, 10:46 PM	#24
J.Muilenb Join Date: Mar 2011 Location: AZ Age: 34 Posts: 24 Trader Rating: (0) Feedback Score: 0 reviews	sell your oil filter relocation kit? if so how much shipped to 85284. thanks.

02-01-2012, 10:48 PM	#25
Knapik Zilvia FREAK! Join Date: Jun 2006 Location: westminster Posts: 1,018 Trader Rating: (36) Feedback Score: 36 reviews	it is a greddy oil cooler kit with a relocated oil block...are you still interested? __________________ not anti-drift, just pro-grip

02-01-2012, 11:23 PM	#26
TougeLabs Premium Member Join Date: Jan 2007 Location: New York Age: 38 Posts: 1,570 Trader Rating: (7) Feedback Score: 7 reviews	What's coming with the chassis ? Dash cage body etc ?

02-03-2012, 12:40 AM	#27
Imarvin240 Nissanaholic! Join Date: Dec 2010 Location: king of prussia, PA! Posts: 1,721 Trader Rating: (18) Feedback Score: 18 reviews	looks like it was a fun car, sucks no one picked it up. __________________ https://instagram.com/eck_matthew/

02-06-2012, 10:49 PM	#29
Knapik Zilvia FREAK! Join Date: Jun 2006 Location: westminster Posts: 1,018 Trader Rating: (36) Feedback Score: 36 reviews	well since no one wants the chassis alone, ill probably be cutting the cage out this weekend. ill take offers on any other part that can be cut off as well. rear quarter panels, roof? doors etc __________________ not anti-drift, just pro-grip

02-12-2012, 10:43 AM	#30
OLDSCHOOLRICE Zilvia Member Join Date: Jan 2008 Location: Eagle Rock, CA Age: 41 Posts: 184 Trader Rating: (17) Feedback Score: 17 reviews	Is the Sparco harness made my Sabelt or Schroth? What is the expiration year?