NJ FREE sr20det stuff & s15 rear calipers, plus cheap SR starters for rebuild & oil pan - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

dwadia · 05-10-2011, 06:42 PM

Free stuff: This stuff is really for pick-up only, unless you buy a starter or oil pan (then i'll throw whatever you want in the box with it). I just don't have the time to deal with shipping right now. If you really need one of these parts shipped, it will be actual shipping cost + a $5 paypal gift. If this stuff isn't taken soon it's going in the trash.

sr20det stock downpipe

IACV (i think it works but can't promise, it's been too long since it was installed)

oil filter Nissan p/n 15208-53J0A

coolant inlet and outlet pipes (the aluminum ones that bolt on the block - i believe one is the thermostat housing)

stock SR recirculation (blow-off) valve

s15 Silvia rear calipers - i've never used them, but expect that they work. they bolt up to any s-chassis... you will need some e-brake mods on the s13 to make it work.

Starters: i have an OEM (Hitachi) and aftermarket starter, both work intermittently/partially, but need a rebuild. $20 each picked up or $30 shipped.

Oil Pan: it's an OEM SR pan that has some surface scratches and rust on the scratched areas, but in very usable condition. It was on my car and working just fine until i replaced it with an oversized one a few months ago. $10 picked up or $20 shipped.

nismoracingsx · 05-10-2011, 06:51 PM

I'll take the bov. ship it to me and i'll give you 10.00 gift + shipping (should be dirt cheap to ship, I would think...)

31405

pm me, lmk

blueshark123 · 05-10-2011, 06:51 PM

ill take rear brakes where r u located ill pik up

dwadia · 05-10-2011, 07:25 PM

Nismo, i will do that and i replied your PM with details.

Blueshark123, i also PM'd you.

word sux · 05-14-2011, 04:40 PM

stock oil pan is mine

were u at in the dirty?

JdmGtDriver · 05-14-2011, 06:02 PM

I will take the rear brakes...name your gift???

dwadia · 05-14-2011, 06:31 PM

word sux and JdmGtDriver, i pm'd you both.

nismoracingsx · 05-14-2011, 07:33 PM

Just received the bov, legit seller

Left you some feedback.

dwadia · 05-17-2011, 04:37 PM

bump... this stuff has about a week left before it becomes scrap metal. please don't send me lots of questions about fitment, etc... read up on the forums. and please don't bother me if you're not serious - i mean come on, it's not like you need to save up money for this stuff. i am just trying not to let this stuff go to waste but i don't want to wind up spending many hours on it.

nismoracingsx, thanks for the feedback, i left it for you as well

smellslikecurry · 05-17-2011, 04:53 PM

is the oil pan dented? how much for the oil pan and s15 brakes to 11566

dwadia · 05-17-2011, 05:05 PM

pm me your email address and i'll email you pics - i wouldn't call it dented. at most it has slight imperfections in shape but very usable (i was using it with no issues).

i'll check shipping later but i'd guess around $20 off the top of my head since you are nearby (brakes are heavy).

*racerx2k1* · 05-17-2011, 05:37 PM

http://zilvia.net/f/wheels-tires/109...-ask-pics.html

05-10-2011, 06:42 PM	#1
dwadia Zilvia Junkie Join Date: Sep 2006 Location: NJ Age: 41 Posts: 302 Trader Rating: (2) Feedback Score: 2 reviews	FREE sr20det stuff & s15 rear calipers, plus cheap SR starters for rebuild & oil pan Free stuff: This stuff is really for pick-up only, unless you buy a starter or oil pan (then i'll throw whatever you want in the box with it). I just don't have the time to deal with shipping right now. If you really need one of these parts shipped, it will be actual shipping cost + a $5 paypal gift. If this stuff isn't taken soon it's going in the trash. sr20det stock downpipe IACV (i think it works but can't promise, it's been too long since it was installed) oil filter Nissan p/n 15208-53J0A coolant inlet and outlet pipes (the aluminum ones that bolt on the block - i believe one is the thermostat housing) stock SR recirculation (blow-off) valve s15 Silvia rear calipers - i've never used them, but expect that they work. they bolt up to any s-chassis... you will need some e-brake mods on the s13 to make it work. Starters: i have an OEM (Hitachi) and aftermarket starter, both work intermittently/partially, but need a rebuild. $20 each picked up or $30 shipped. Oil Pan: it's an OEM SR pan that has some surface scratches and rust on the scratched areas, but in very usable condition. It was on my car and working just fine until i replaced it with an oversized one a few months ago. $10 picked up or $20 shipped.

05-10-2011, 06:51 PM	#2
nismoracingsx Zilvia Addict Join Date: Sep 2007 Location: Alachua, FL Age: 37 Posts: 969 Trader Rating: (32) Feedback Score: 32 reviews	I'll take the bov. ship it to me and i'll give you 10.00 gift + shipping (should be dirt cheap to ship, I would think...) 31405 pm me, lmk __________________

05-14-2011, 06:02 PM	#6
JdmGtDriver Zilvia FREAK! Join Date: Feb 2008 Location: Phillips Ranch/Diamond Bar Posts: 1,453 Trader Rating: (28) Feedback Score: 28 reviews	I will take the rear brakes...name your gift??? __________________ Dream to achieve!!!

05-14-2011, 07:33 PM	#8
nismoracingsx Zilvia Addict Join Date: Sep 2007 Location: Alachua, FL Age: 37 Posts: 969 Trader Rating: (32) Feedback Score: 32 reviews	Just received the bov, legit seller Left you some feedback. __________________

05-17-2011, 04:53 PM	#10
smellslikecurry Post Whore! Join Date: May 2003 Location: bangladesh Age: 37 Posts: 4,590 Trader Rating: (33) Feedback Score: 33 reviews	is the oil pan dented? how much for the oil pan and s15 brakes to 11566 __________________

05-10-2011, 06:51 PM	#3
blueshark123 Post Whore! Join Date: Apr 2006 Location: North Jersey Posts: 5,481 Trader Rating: (55) Feedback Score: 55 reviews	ill take rear brakes where r u located ill pik up

05-10-2011, 07:25 PM	#4
dwadia Zilvia Junkie Join Date: Sep 2006 Location: NJ Age: 41 Posts: 302 Trader Rating: (2) Feedback Score: 2 reviews	Nismo, i will do that and i replied your PM with details. Blueshark123, i also PM'd you.

05-14-2011, 04:40 PM	#5
word sux Zilvia FREAK! Join Date: Dec 2009 Location: earth Age: 62 Posts: 1,138 Trader Rating: (0) Feedback Score: 0 reviews	stock oil pan is mine were u at in the dirty?

05-14-2011, 06:31 PM	#7
dwadia Zilvia Junkie Join Date: Sep 2006 Location: NJ Age: 41 Posts: 302 Trader Rating: (2) Feedback Score: 2 reviews	word sux and JdmGtDriver, i pm'd you both.

05-17-2011, 04:37 PM	#9
dwadia Zilvia Junkie Join Date: Sep 2006 Location: NJ Age: 41 Posts: 302 Trader Rating: (2) Feedback Score: 2 reviews	bump... this stuff has about a week left before it becomes scrap metal. please don't send me lots of questions about fitment, etc... read up on the forums. and please don't bother me if you're not serious - i mean come on, it's not like you need to save up money for this stuff. i am just trying not to let this stuff go to waste but i don't want to wind up spending many hours on it. nismoracingsx, thanks for the feedback, i left it for you as well

05-17-2011, 05:05 PM	#11
dwadia Zilvia Junkie Join Date: Sep 2006 Location: NJ Age: 41 Posts: 302 Trader Rating: (2) Feedback Score: 2 reviews	pm me your email address and i'll email you pics - i wouldn't call it dented. at most it has slight imperfections in shape but very usable (i was using it with no issues). i'll check shipping later but i'd guess around $20 off the top of my head since you are nearby (brakes are heavy).

05-17-2011, 05:37 PM	#12
racerx2k1 460 Join Date: Jan 2004 Location: Nowhere Posts: 17,704 Trader Rating: (0) Feedback Score: 0 reviews	http://zilvia.net/f/wheels-tires/109...-ask-pics.html __________________