CA HID retrofit setup - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

MrMcgarrett · 08-18-2010, 01:13 PM

These are REAL HID lights. No Ebay junk.
Set up is complete.
-Valeo Xenon projectors
-Philips ballast
-Philips D2R bulbs
-Pre-wired Harness

The harness has a H4 plug(low beam only) for S13 or zenki S14.
The projectors have 2.5in lenses.
One lens has a small nick.
The projectors measure 3.5in high, 4in wide, and 6in long from the lens to the bulb plug.
Yes you have to cut/modify your headlight housings to fit the projectors. They don't "bolt-in".
The wiring is plug and play on a S13 or zenki S14.
Here is an example of the kind of work that needs to be done: S14 240SX S2000 HID RETROFIT

$SOLD FINALLY! lol

RedRedWine · 08-19-2010, 10:39 PM

its about time lol thanks

08-18-2010, 01:13 PM	#1
MrMcgarrett Post Whore! Join Date: Sep 2006 Location: Pomona, CA Age: 42 Posts: 5,591 Trader Rating: (313) Feedback Score: 313 reviews	HID retrofit setup These are REAL HID lights. No Ebay junk. Set up is complete. -Valeo Xenon projectors -Philips ballast -Philips D2R bulbs -Pre-wired Harness The harness has a H4 plug(low beam only) for S13 or zenki S14. The projectors have 2.5in lenses. One lens has a small nick. The projectors measure 3.5in high, 4in wide, and 6in long from the lens to the bulb plug. Yes you have to cut/modify your headlight housings to fit the projectors. They don't "bolt-in". The wiring is plug and play on a S13 or zenki S14. Here is an example of the kind of work that needs to be done: S14 240SX S2000 HID RETROFIT $SOLD FINALLY! lol Last edited by MrMcgarrett; 08-19-2010 at 09:51 PM.. Reason: SOLD!

08-19-2010, 10:39 PM	#2
RedRedWine Zilvia Member Join Date: Mar 2007 Location: So. Cal Posts: 191 Trader Rating: (26) Feedback Score: 26 reviews	its about time lol thanks