CA CP/Eagle/Apexi/Trust/Nismo/Short Block/Head/Tensioner/Polished V.cover and more...... - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

ETHANOLED SR · 02-17-2010, 02:34 PM

I am selling my parts I was going to use for my SR20 build. I got a good deal on another motor and now I have all these extra parts sitting around. Check them out, all quality parts. No knock offs, No damages (other than short block for rebuild) in some cases Brand spankin' new! Make offers and I'll consider if reasonable. Feel free to ask any questions, got a lot more parts I can't think of right now.

Item 1:
CP pistons 90mm 8.5.1 C.R. BRAND NEW !!!
Price is $500.00 USD + shipping and paypal fees
(MSRP $699.00)

Item 2:
Eagle H-Beam Rods BRAND NEW !!!
Price is $290.00 USD + shipping and paypal fees
(MSRP $395.00)

Item 3:
TRUST also known as Greddy Polished Large capacity Oil Pan
Price is $280.00 USD + shipping and paypal fees
(MSRP $395.00 unpolished)

Item 4:
S14 SR20DET Polished Valve Cover (Nismo cap not included)
Price is $275.00 USD + shipping and paypal fees
(MSRP $395.00 unpolished)

Item 5:
S14 SR20DET Short Block with pans and pumps and all internals (Spun Bearing) perfect for a rebuild.
Price is $300.00 USD local pickup preferred.

Item 6:
S14 SR20DET Stock Cams and gears VTC
Price is $150.00 USD + shipping and paypal fees

Item 7:
Apexi SR20DET Metal Head gasket (used once)
SOLD!!! SOLD!!! SOLD!!!
MSRP $240.00

Item 8:
S14 SR20DET Clean Bare Head with valves and guides (3 angle valve job and new exhaust guides) also comes with cam caps and bolts. I will post pics soon or upon request.
Price is $250.00 picked up preferred

Item 9:
Nismo 3pc Motor and Transmission Mounts (low mileage used on dyno)
Price is $180.00 + shipping and paypal fees
MSRP $270.00

Item 10:
SR20DET Timing Chain Tensioner (Brand New) Pics soon.
price is $55.00 + shipping and paypal fees
MSRP $80.00

ETHANOLED SR · 02-20-2010, 07:20 PM

Bumpo Uno. Quality parts here, someone needs to rebuild? buy these?

240Zfunahollic · 02-20-2010, 07:29 PM

who polished your valve cover or did you do it yourself? If you did it yourself can you share some info on your polishing method? bump for you!

essforteen · 02-20-2010, 07:40 PM

Good Seller Legit
GLWS!

ETHANOLED SR · 02-22-2010, 12:58 PM

Bump!!! Make offers. Someone rebuild?

yoni_nismo · 02-22-2010, 08:35 PM

Great parts and legit guy!
GLWS

zylvia213 · 02-22-2010, 10:38 PM

that valve cover looks sick! To bad I have a redtop. GLWS

ETHANOLED SR · 02-23-2010, 11:37 PM

Quote:

Originally Posted by 240Zfunahollic

who polished your valve cover or did you do it yourself? If you did it yourself can you share some info on your polishing method? bump for you!

I wish I had done it myself, lol. I had it done by a polishing specialist nearby.

Quote:

Originally Posted by zylvia213

that valve cover looks sick! To bad I have a redtop. GLWS

Thanks bro, yeah I am redtop too now so I don't need it. I never got to put it on the motor. I will definitely polish my redtop cover too.

ETHANOLED SR · 02-25-2010, 05:00 PM

Apexi Head Gasket sold to vqboodah!!!
Some items are pending sale.
If interested in a part? just ask and I'll get back to you asap

ETHANOLED SR · 03-02-2010, 05:47 PM

I am selling my parts I was going to use for my SR20 build. I got a good deal on another motor and now I have all these extra parts sitting around. Check them out, all quality parts. No knock offs, No damages (other than short block for rebuild) in some cases Brand spankin' new! Make offers and I'll consider if reasonable. Feel free to ask any questions, got a lot more parts I can't think of right now.

Item 1:
CP pistons 90mm 8.5.1 C.R. BRAND NEW !!!
Price is $500.00 USD + shipping and paypal fees
(MSRP $699.00)

Item 2:
Eagle H-Beam Rods BRAND NEW !!!
Price is $290.00 USD + shipping and paypal fees
(MSRP $395.00)

Item 3:
TRUST also known as Greddy Polished Large capacity Oil Pan
Price is $280.00 USD + shipping and paypal fees
(MSRP $395.00 unpolished)

Item 4:
S14 SR20DET Polished Valve Cover (Nismo cap not included)
Price is $275.00 USD + shipping and paypal fees
(MSRP $395.00 unpolished)

Item 5:
S14 SR20DET Short Block with pans and pumps and all internals (Spun Bearing) perfect for a rebuild.
Price is $300.00 USD local pickup preferred.

Item 6:
S14 SR20DET Stock Cams and gears VTC
Price is $150.00 USD + shipping and paypal fees

Item 7:
S14 SR20DET Clean Bare Head with valves and guides (3 angle valve job and new exhaust guides low miles) also comes with cam caps and bolts, rocker arms and oil lines.
Price is $250.00 picked up preferred

Item 8:
Nismo 3pc Motor and Transmission Mounts (low mileage

used on dyno)
Price is $180.00 + shipping and paypal fees
MSRP $270.00

Item 9:
SR20DET Timing Chain

Tensioner (Brand New).
price is $55.00 + shipping and paypal fees
MSRP $80.00

Item 10:
S13 A/C Heat Control Panel with Heater Cores, Blower, Ducts and all under dash parts.
Price is $80.00 picked up preferred

ETHANOLED SR · 03-03-2010, 12:09 PM

Make an offer, I don't need these anymore.

jarend · 03-03-2010, 01:25 PM

pm me the cheapest you can do on the rods and pistons. Thanks.

s14canyoncity · 03-03-2010, 03:19 PM

nice V-cover wish it was for a KADE

ETHANOLED SR · 03-03-2010, 11:21 PM

Short Block sold to Mr. Booie!!!
Make offers on other parts. I no longer need any of this stuff.

ETHANOLED SR · 03-04-2010, 12:58 PM

Quote:

Originally Posted by jarend

pm me the cheapest you can do on the rods and pistons. Thanks.

pm sent, check your inbox and get back to me.

Quote:

Originally Posted by s14canyoncity

nice V-cover wish it was for a KADE

I know, I wish I can use it still on my S13 block. Buy it and hang it on your wall, lol.

*racerx2k1* · 03-04-2010, 04:16 PM

Quote:

Originally Posted by ETHANOLED SR

Make an offer, I don't need these anymore.

Quote:

Originally Posted by ETHANOLED SR

Bumpo Uno. Quality parts here, someone needs to rebuild? buy these?

Quote:

Originally Posted by ETHANOLED SR

Bump!!! Make offers. Someone rebuild?

Quote:

Originally Posted by ETHANOLED SR

Apexi Head Gasket sold to vqboodah!!!
Some items are pending sale.
If interested in a part? just ask and I'll get back to you asap

2 bump limit. You can start new thread in 3 days.

02-17-2010, 02:34 PM	#1
ETHANOLED SR Zilvia Addict Join Date: Sep 2009 Location: Somewhere Posts: 700 Trader Rating: (33) Feedback Score: 33 reviews	CP/Eagle/Apexi/Trust/Nismo/Short Block/Head/Tensioner/Polished V.cover and more...... I am selling my parts I was going to use for my SR20 build. I got a good deal on another motor and now I have all these extra parts sitting around. Check them out, all quality parts. No knock offs, No damages (other than short block for rebuild) in some cases Brand spankin' new! Make offers and I'll consider if reasonable. Feel free to ask any questions, got a lot more parts I can't think of right now. Item 1: CP pistons 90mm 8.5.1 C.R. BRAND NEW !!! Price is $500.00 USD + shipping and paypal fees (MSRP $699.00) Item 2: Eagle H-Beam Rods BRAND NEW !!! Price is $290.00 USD + shipping and paypal fees (MSRP $395.00) Item 3: TRUST also known as Greddy Polished Large capacity Oil Pan Price is $280.00 USD + shipping and paypal fees (MSRP $395.00 unpolished) Item 4: S14 SR20DET Polished Valve Cover (Nismo cap not included) Price is $275.00 USD + shipping and paypal fees (MSRP $395.00 unpolished) Item 5: S14 SR20DET Short Block with pans and pumps and all internals (Spun Bearing) perfect for a rebuild. Price is $300.00 USD local pickup preferred. Item 6: S14 SR20DET Stock Cams and gears VTC Price is $150.00 USD + shipping and paypal fees Item 7: Apexi SR20DET Metal Head gasket (used once) SOLD!!! SOLD!!! SOLD!!! MSRP $240.00 Item 8: S14 SR20DET Clean Bare Head with valves and guides (3 angle valve job and new exhaust guides) also comes with cam caps and bolts. I will post pics soon or upon request. Price is $250.00 picked up preferred Item 9: Nismo 3pc Motor and Transmission Mounts (low mileage used on dyno) Price is $180.00 + shipping and paypal fees MSRP $270.00 Item 10: SR20DET Timing Chain Tensioner (Brand New) Pics soon. price is $55.00 + shipping and paypal fees MSRP $80.00 Last edited by ETHANOLED SR; 03-01-2010 at 12:54 PM.. Reason: HG sold

02-20-2010, 07:29 PM	#3
240Zfunahollic Zilvia Addict Join Date: Aug 2003 Location: South Carolina Age: 37 Posts: 607 Trader Rating: (35) Feedback Score: 35 reviews	who polished your valve cover or did you do it yourself? If you did it yourself can you share some info on your polishing method? bump for you! __________________ Visit My Trader rating page http://zilvia.net/f/traderratings.html?u=15347

02-22-2010, 10:38 PM	#7
zylvia213 Nissanaholic! Join Date: Aug 2007 Location: LOST ANGELES Posts: 1,978 Trader Rating: (36) Rides Gallery: zylvia213 Feedback Score: 36 reviews	that valve cover looks sick! To bad I have a redtop. GLWS __________________

03-02-2010, 05:47 PM	#10
ETHANOLED SR Zilvia Addict Join Date: Sep 2009 Location: Somewhere Posts: 700 Trader Rating: (33) Feedback Score: 33 reviews	CP/Eagle/Trust/Nismo/Short Block/Head/Tensioner/Polished V.cover and more...... I am selling my parts I was going to use for my SR20 build. I got a good deal on another motor and now I have all these extra parts sitting around. Check them out, all quality parts. No knock offs, No damages (other than short block for rebuild) in some cases Brand spankin' new! Make offers and I'll consider if reasonable. Feel free to ask any questions, got a lot more parts I can't think of right now. Item 1: CP pistons 90mm 8.5.1 C.R. BRAND NEW !!! Price is $500.00 USD + shipping and paypal fees (MSRP $699.00) Item 2: Eagle H-Beam Rods BRAND NEW !!! Price is $290.00 USD + shipping and paypal fees (MSRP $395.00) Item 3: TRUST also known as Greddy Polished Large capacity Oil Pan Price is $280.00 USD + shipping and paypal fees (MSRP $395.00 unpolished) Item 4: S14 SR20DET Polished Valve Cover (Nismo cap not included) Price is $275.00 USD + shipping and paypal fees (MSRP $395.00 unpolished) Item 5: S14 SR20DET Short Block with pans and pumps and all internals (Spun Bearing) perfect for a rebuild. Price is $300.00 USD local pickup preferred. Item 6: S14 SR20DET Stock Cams and gears VTC Price is $150.00 USD + shipping and paypal fees Item 7: S14 SR20DET Clean Bare Head with valves and guides (3 angle valve job and new exhaust guides low miles) also comes with cam caps and bolts, rocker arms and oil lines. Price is $250.00 picked up preferred Item 8: Nismo 3pc Motor and Transmission Mounts (low mileage used on dyno) Price is $180.00 + shipping and paypal fees MSRP $270.00 Item 9: SR20DET Timing Chain Tensioner (Brand New). price is $55.00 + shipping and paypal fees MSRP $80.00 Item 10: S13 A/C Heat Control Panel with Heater Cores, Blower, Ducts and all under dash parts. Price is $80.00 picked up preferred

03-03-2010, 03:19 PM	#13
s14canyoncity Zilvia FREAK! Join Date: Jun 2009 Location: Socal Posts: 1,181 Trader Rating: (50) Feedback Score: 50 reviews	nice V-cover wish it was for a KADE __________________ Nissan S14 Navan Zenki

02-20-2010, 07:20 PM	#2
ETHANOLED SR Zilvia Addict Join Date: Sep 2009 Location: Somewhere Posts: 700 Trader Rating: (33) Feedback Score: 33 reviews	Bumpo Uno. Quality parts here, someone needs to rebuild? buy these?

02-20-2010, 07:40 PM	#4
essforteen Nissanaholic! Join Date: Apr 2007 Location: LAX Area (So CAL) Posts: 1,802 Trader Rating: (50) Rides Gallery: essforteen Feedback Score: 50 reviews	Good Seller Legit GLWS!

02-22-2010, 12:58 PM	#5
ETHANOLED SR Zilvia Addict Join Date: Sep 2009 Location: Somewhere Posts: 700 Trader Rating: (33) Feedback Score: 33 reviews	Bump!!! Make offers. Someone rebuild?

02-22-2010, 08:35 PM	#6
yoni_nismo Zilvia Junkie Join Date: Sep 2006 Location: So Cal Age: 35 Posts: 405 Trader Rating: (29) Feedback Score: 29 reviews	Great parts and legit guy! GLWS

02-25-2010, 05:00 PM	#9
ETHANOLED SR Zilvia Addict Join Date: Sep 2009 Location: Somewhere Posts: 700 Trader Rating: (33) Feedback Score: 33 reviews	Apexi Head Gasket sold to vqboodah!!! Some items are pending sale. If interested in a part? just ask and I'll get back to you asap

03-03-2010, 12:09 PM	#11
ETHANOLED SR Zilvia Addict Join Date: Sep 2009 Location: Somewhere Posts: 700 Trader Rating: (33) Feedback Score: 33 reviews	Make an offer, I don't need these anymore.

03-03-2010, 01:25 PM	#12
jarend Zilvia Junkie Join Date: Aug 2009 Location: San Diego Posts: 410 Trader Rating: (27) Feedback Score: 27 reviews	pm me the cheapest you can do on the rods and pistons. Thanks.

03-03-2010, 11:21 PM	#14
ETHANOLED SR Zilvia Addict Join Date: Sep 2009 Location: Somewhere Posts: 700 Trader Rating: (33) Feedback Score: 33 reviews	Short Block sold to Mr. Booie!!! Make offers on other parts. I no longer need any of this stuff.