Boost controller and Gauge wiring suggestions? - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

ges311 · 10-02-2009, 01:23 PM

I am planning on wiring up 7 devices to a 12v ignition power source: Blitz SBCID, 5 STRI Gagues and an innovative A/F meter. I am going to run a wire with an inline fuse from the stereo harness to an 8 point terminal strip so I can easily add stuff as I am building the car.

Is this too much stuff running off that tiny 12v stereo wire? Also some people suggest using a bosch style relay but I don't see the advantage besides the ability to disconnect stuff.

Any other suggestions on a good setup to wire this many devices?

10-02-2009, 01:23 PM	#1
ges311 Leaky Injector Join Date: Jun 2004 Location: NJ Posts: 131 Trader Rating: (7) Feedback Score: 7 reviews	Boost controller and Gauge wiring suggestions? I am planning on wiring up 7 devices to a 12v ignition power source: Blitz SBCID, 5 STRI Gagues and an innovative A/F meter. I am going to run a wire with an inline fuse from the stereo harness to an 8 point terminal strip so I can easily add stuff as I am building the car. Is this too much stuff running off that tiny 12v stereo wire? Also some people suggest using a bosch style relay but I don't see the advantage besides the ability to disconnect stuff. Any other suggestions on a good setup to wire this many devices?