CA Widebody, Brakes, Multilink, 1jz, sp1s, gtr wheels etc... *Brocal* - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

cfinch · 07-01-2009, 01:13 AM

Got some stuff I need to sell located in Oak Hills, CA or can be picked up in Redlands, CA at the shop either way. Willing to ship smaller items at buyers expense. Local buyers have priority.

sr20 arp headstuds $70

Kics mismatched 15/25mm spacers 5x114(right) I used them for some off wide fenders I picked up. $50 (spacers on the left sold)

Short shifter I think it's a c's style? It clamps to the factory top plate. $50

Q45 brakes, rotors, pads, ss lines $sold

30mm bmagic wide fenders s13 hatch. Fenders have never been mounted but have been sanded for paint. They have some scratches from being tossed around the garage $150

30mm bmagic front pop up s13 fenders. Never mounted just sanded for paint and the vent has been filled. $200

CX Racing ka aluminum radiator $120

S13 multi link in like new condition. I was told they were Megan Racing which they appear to be. Used for maybe a couple hundred miles. $300 for all of it.

R34 GTR wheels no center caps and have some damage. No bent wheels or cracks just some curbing and whatnot. Could use refinishing but still a classic super light weight wheel! Comes with great tires! $900

SSR Professir Sp1's 17x9 5x114 offset is in the 30's with a mid-low face on them so they still have a good amount of lip. Come with near new federal 595ss. They were refinished a while ago and I never got to use them so they are in perfect shape! Pair only $500

Lastly I have a 1jz engine pretty complete with engine harness and everything from oil pan to valve cover. I just had the cylinder head rebuilt and valves adjusted along with a brand new oem toyota gasket set and arp head studs. I install all the new seals and put on a front sump oil pan and 2jz waterpump already so it's set up for a 240sx conversion or I have the jzx81 mounts to drop into a cressida. I put alot of money into it between finding a running motor, parts and the cylinder head. It's pretty complete minus tranny, ecu and I threw the factory turbos out since there was alittle oil in the outlets. I do have the map sensor, starter and little misc things like that. It will come with a spec pressure plate for either the r154 or the w58 so you just need a clutch disc not a whole kit and a t04e turbo which should be good for around 450hp. I'm asking $1,400 for everything pics up soon.

cfinch · 07-01-2009, 09:16 AM

I also have a Megan Racing 3" catback exhaust in good shape $sold

Mr.Bobble · 07-01-2009, 09:32 AM

How much to send the kics spacers to 77083 lmk thanks

Driftastic · 07-01-2009, 10:14 AM

man i really want the megan suspension peices....payday is tomorrow ill see if i can come up with da dough. thats a hell of a package for $300

Chue240sx · 07-01-2009, 10:55 AM

is that only one ssr sp1?

SAKURA · 07-01-2009, 11:23 AM

finch, can you bring those spacers with you to vegas? that is, if i need them. getting tires soon so ill see about my fitment and if i need em. thx.

cfinch · 07-01-2009, 04:22 PM

Mr.Bobble- I can do $60 shipped on those including paypal fees just pm me.

Driftastic- Yeah let me know! I think I saw the links for like 160 + shipping per link on Ebay? I have no use for em tho... They literally have a few hundred miles on em!

Chue240sx- It's a pair of sp1's... I was just too lazy to wipe all the dust off of them and get a picture. That one was a decent shot of the lip. The outer lips were redone as well as the centers powdercoated black and havent really been driven on much since. I live in the desert and they have been sitting in my garage for a while.

Sakura- Just lmk and I'll be glad to bring em to Vegas.

NISMO_tuner · 07-01-2009, 04:31 PM

Interested in any trades?

jarredd · 07-01-2009, 06:33 PM

how much for the Q45 brake setup shipped to 92083?

i am really interested

thanks

cfinch · 07-02-2009, 11:26 PM

Spacers, Exhaust and Brakes sold!

The only trades I'm looking for right now is some 16x8 sportmaxes....

EccentricAces · 07-02-2009, 11:40 PM

VERY VERY interested in the C's short shifter if it really is.

Is there anything missing for the short shifter that I should be aware of?

Where are you located?

I'll pick it up if everything is good in cash ASAP

cfinch · 07-07-2009, 09:51 AM

One last shot...

93superHICAS · 07-07-2009, 10:37 AM

interested in the rear fenders- pm sent

Schwartzy · 07-07-2009, 12:38 PM

willing to ship the rear widebody fenders to 67212?

irregartless · 07-10-2009, 10:09 AM

payment sent for MR arms and head studs

B18MONSTRO · 07-10-2009, 11:08 AM

will u take 100 cash for the rear quarter panels?

07-01-2009, 01:13 AM	#1
cfinch Zilvia Addict Join Date: Dec 2004 Location: Las Vegas Age: 39 Posts: 726 Trader Rating: (2) Feedback Score: 2 reviews	Widebody, Brakes, Multilink, 1jz, sp1s, gtr wheels etc... Brocal Got some stuff I need to sell located in Oak Hills, CA or can be picked up in Redlands, CA at the shop either way. Willing to ship smaller items at buyers expense. Local buyers have priority. sr20 arp headstuds $70 Kics mismatched 15/25mm spacers 5x114(right) I used them for some off wide fenders I picked up. $50 (spacers on the left sold) Short shifter I think it's a c's style? It clamps to the factory top plate. $50 Q45 brakes, rotors, pads, ss lines $sold 30mm bmagic wide fenders s13 hatch. Fenders have never been mounted but have been sanded for paint. They have some scratches from being tossed around the garage $150 30mm bmagic front pop up s13 fenders. Never mounted just sanded for paint and the vent has been filled. $200 CX Racing ka aluminum radiator $120 S13 multi link in like new condition. I was told they were Megan Racing which they appear to be. Used for maybe a couple hundred miles. $300 for all of it. R34 GTR wheels no center caps and have some damage. No bent wheels or cracks just some curbing and whatnot. Could use refinishing but still a classic super light weight wheel! Comes with great tires! $900 SSR Professir Sp1's 17x9 5x114 offset is in the 30's with a mid-low face on them so they still have a good amount of lip. Come with near new federal 595ss. They were refinished a while ago and I never got to use them so they are in perfect shape! Pair only $500 Lastly I have a 1jz engine pretty complete with engine harness and everything from oil pan to valve cover. I just had the cylinder head rebuilt and valves adjusted along with a brand new oem toyota gasket set and arp head studs. I install all the new seals and put on a front sump oil pan and 2jz waterpump already so it's set up for a 240sx conversion or I have the jzx81 mounts to drop into a cressida. I put alot of money into it between finding a running motor, parts and the cylinder head. It's pretty complete minus tranny, ecu and I threw the factory turbos out since there was alittle oil in the outlets. I do have the map sensor, starter and little misc things like that. It will come with a spec pressure plate for either the r154 or the w58 so you just need a clutch disc not a whole kit and a t04e turbo which should be good for around 450hp. I'm asking $1,400 for everything pics up soon. Last edited by cfinch; 07-02-2009 at 11:27 PM..

07-01-2009, 09:16 AM	#2
cfinch Zilvia Addict Join Date: Dec 2004 Location: Las Vegas Age: 39 Posts: 726 Trader Rating: (2) Feedback Score: 2 reviews	I also have a Megan Racing 3" catback exhaust in good shape $sold Last edited by cfinch; 07-02-2009 at 11:27 PM..

07-01-2009, 04:31 PM	#8
NISMO_tuner Nissanaholic! Join Date: Apr 2008 Location: SoCal 818/562/714 Posts: 2,193 Trader Rating: (64) Feedback Score: 64 reviews	Interested in any trades? __________________ Check my for sale thread for S13 parts

07-02-2009, 11:40 PM	#11
EccentricAces Zilvia Junkie Join Date: Mar 2009 Location: Los Angeles, CA Posts: 367 Trader Rating: (5) Feedback Score: 5 reviews	VERY VERY interested in the C's short shifter if it really is. Is there anything missing for the short shifter that I should be aware of? Where are you located? I'll pick it up if everything is good in cash ASAP __________________ Super-Made Instant Gentleman Zenki S14 VIP itzjOw3.com Phen Club

07-07-2009, 10:37 AM	#13
93superHICAS Zilvia Member Join Date: May 2006 Location: houston texas Posts: 223 Trader Rating: (0) Feedback Score: 0 reviews	interested in the rear fenders- pm sent __________________ when life gets hard, i pick up the card with the smiley face

07-01-2009, 09:32 AM	#3
Mr.Bobble Zilvia Member Join Date: Jan 2007 Location: Houston, T.X Age: 35 Posts: 236 Trader Rating: (5) Feedback Score: 5 reviews	How much to send the kics spacers to 77083 lmk thanks

07-01-2009, 10:14 AM	#4
Driftastic Leaky Injector Join Date: Jun 2009 Location: cabot, ar Age: 39 Posts: 135 Trader Rating: (1) Feedback Score: 1 reviews	man i really want the megan suspension peices....payday is tomorrow ill see if i can come up with da dough. thats a hell of a package for $300

07-01-2009, 10:55 AM	#5
Chue240sx Zilvia Addict Join Date: Sep 2007 Location: California Age: 33 Posts: 618 Trader Rating: (11) Feedback Score: 11 reviews	is that only one ssr sp1?

07-01-2009, 11:23 AM	#6
SAKURA Zilvia Junkie Join Date: Sep 2008 Location: 　 Posts: 345 Trader Rating: (22) Feedback Score: 22 reviews	finch, can you bring those spacers with you to vegas? that is, if i need them. getting tires soon so ill see about my fitment and if i need em. thx.

07-01-2009, 04:22 PM	#7
cfinch Zilvia Addict Join Date: Dec 2004 Location: Las Vegas Age: 39 Posts: 726 Trader Rating: (2) Feedback Score: 2 reviews	Mr.Bobble- I can do $60 shipped on those including paypal fees just pm me. Driftastic- Yeah let me know! I think I saw the links for like 160 + shipping per link on Ebay? I have no use for em tho... They literally have a few hundred miles on em! Chue240sx- It's a pair of sp1's... I was just too lazy to wipe all the dust off of them and get a picture. That one was a decent shot of the lip. The outer lips were redone as well as the centers powdercoated black and havent really been driven on much since. I live in the desert and they have been sitting in my garage for a while. Sakura- Just lmk and I'll be glad to bring em to Vegas.

07-01-2009, 06:33 PM	#9
jarredd Zilvia Member Join Date: Jun 2007 Location: Vista, CA (San Diego) Age: 38 Posts: 239 Trader Rating: (3) Feedback Score: 3 reviews	how much for the Q45 brake setup shipped to 92083? i am really interested thanks

07-02-2009, 11:26 PM	#10
cfinch Zilvia Addict Join Date: Dec 2004 Location: Las Vegas Age: 39 Posts: 726 Trader Rating: (2) Feedback Score: 2 reviews	Spacers, Exhaust and Brakes sold! The only trades I'm looking for right now is some 16x8 sportmaxes....

07-07-2009, 09:51 AM	#12
cfinch Zilvia Addict Join Date: Dec 2004 Location: Las Vegas Age: 39 Posts: 726 Trader Rating: (2) Feedback Score: 2 reviews	One last shot...

07-07-2009, 12:38 PM	#14
Schwartzy Leaky Injector Join Date: Sep 2008 Location: wichita ks Posts: 70 Trader Rating: (0) Feedback Score: 0 reviews	willing to ship the rear widebody fenders to 67212?

07-10-2009, 10:09 AM	#15
irregartless BANNED Join Date: Mar 2009 Location: high hills Age: 40 Posts: 52 Trader Rating: (1) Feedback Score: 1 reviews	payment sent for MR arms and head studs

07-10-2009, 11:08 AM	#16
B18MONSTRO Leaky Injector Join Date: Apr 2009 Location: El Monte Age: 35 Posts: 108 Trader Rating: (1) Feedback Score: 1 reviews	Rear wide body will u take 100 cash for the rear quarter panels?