MN Big brakes/five lug /clutch flywheel/Intercooler+radiator/misc - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Racer X · 12-21-2008, 12:13 PM

I have a stacked Intercooler (spearco)/Radiator(hpi 12x24x3) combo comes with hot and cold pipes (set op for greddy intake manifold for s13), mounts rad hoses, couplers t bolt clamps, blow off valve (blitz super sound) electric fans. I have $1300 invested in to this set up SOLD shipped

I have Jun chromoly flywheel and custom made clutch kit. (Act full face disk and Clutchnet.com double diaphragm pressure plate. (twice the normal clamping force) this set up held 22psi out of a gt3071r no problems has about 300 miles on it. very smooth to drive with SOLD

5zigen fire ball exhaust+ greddy down pipe+ test pipe welded in $100 pick up only

Big brake kit for the front comes with willwood calipers, pads clips brackets s lines etc, brembo 13" single piece rotors,(five lug)
SOLD

300z rear brake kit with ss lines and brembo cross drilled rotors SOLD (6k miles) shipped

five lug swap with s14 knuckles. Oem bearings, no cheap ass aftermarket conversion shit that doesn't hold up SOLD shipped less than 6k miles (one rear bearing in brand new

sr20det coils $15 each shipped
sr20det cas $sold
freddy oil pan $25 shipped
blacktop valve cover $30 shipped
300zx NA limited slip with j30 axles $175 pick up only
Nex racing bucket with brackets $75 pick up only
Jdm S14 front bumper (unpainted) sold
water pumps/ stock sr20det oil pans, other misc parts $15 shipped

All Items are best offer, I need this stuff out of my garage

612 242 7428 leave a message if I don't answer I'll call back

thanks Mike

jsasrsr · 12-21-2008, 01:29 PM

pmd you on the brake kit...

traxx07 · 12-21-2008, 01:36 PM

fmic ? price ?

*wafflez66* · 12-21-2008, 01:45 PM

Quote:

Originally Posted by Racer X

I have a stacked Intercooler (spearco)/Radiator(hpi 12x24x3) combo comes with hot and cold pipes (set op for greddy intake manifold for s13), mounts rad hoses, couplers t bolt clamps, blow off valve (blitz super sound) electric fans. I have $1300 invested in to this set up $400 shipped

it is in the original post

andmattsayd · 12-21-2008, 02:49 PM

you have PM's.

Racer X · 12-22-2008, 05:28 AM

All pm's replied to.

boostlee · 12-22-2008, 07:28 AM

Hey, can u send me pics of the clutch and flywheel, also might just go with the oil pan.
lmk.

Racer X · 12-22-2008, 04:58 PM

I keep getting price shipped price pm's the price includes shipping in the 48 states unless noted

Racer X · 12-23-2008, 05:08 AM

pics of the clutch are right on top

Volchok · 01-03-2009, 12:14 AM

does that oil pan have 1/8 NPT ports on it for additional sensors?

CamryOnBronze · 01-03-2009, 10:30 AM

Did the brakes ever sell?

singlecamslam · 01-03-2009, 11:06 AM

pics of oil pan? dents?

DRFT180 · 01-03-2009, 06:04 PM

Willing to split up the 5-lug stuff? I need S14 front hubs with the spindles

dangarnett · 01-03-2009, 07:43 PM

I'm very interested in the rear 300z brakes, pm'd u

reccakun08 · 01-04-2009, 03:31 AM

with the front brake setup did you use stock brake master cylinder?

Racer X · 01-04-2009, 05:39 AM

Quote:

does that oil pan have 1/8 NPT ports on it for additional sensors?
12-23-2008 12:08 PM

yes

Quote:

I'm very interested in the rear 300z brakes, pm'd u

replied

Quote:

Willing to split up the 5-lug stuff? I need S14 front hubs with the spindles

Id prefer not to

Quote:

pics of oil pan? dents?

one has a minor dent that was pounded out the other is as nice as can be expected, after this post ill see if I have pics hosted

Quote:

Did the brakes ever sell?

still for sale

Quote:

with the front brake setup did you use stock brake master cylinder?

I use a 300z mc

Xclusive_racer · 01-04-2009, 07:22 AM

I have a stacked Intercooler (spearco)/Radiator(hpi 12x24x3) combo comes with hot and cold pipes (set op for greddy intake manifold for s13), mounts rad hoses, couplers t bolt clamps, blow off valve

(blitz super sound) electric fans. I have $1300 invested in to this set up $400 shipped

Ill take this off your hands can you hold it for me until the 5th so i can see if it will fit my set up??? Im flying outtah florida today and going back to cali...please hold it for me....all that stuff is only 400$ shipped??

Ceepo · 01-04-2009, 08:15 AM

Would that intercooler setup fit a s14 with a s13 sr20det???

airforceone451 · 01-04-2009, 09:31 AM

part out the front rotors only?

Racer X · 01-04-2009, 09:51 AM

id does not come with the 2 piece rotors. im keeping those. it comes with new one piece rotors

singlecamslam · 01-04-2009, 10:25 AM

dibs on the oil pan, waiting for pics. And i was talking about the greddy or the freddy one.

prokronic36 · 01-04-2009, 01:23 PM

lmk know if you want the just sell the rear calipers to 96817 thx

tramp_drift240 · 01-04-2009, 04:47 PM

i believe i pm'd you about the whole five lug setup with knuckles, as a set.

Racer X · 01-05-2009, 05:30 AM

that price includes knuckles i know its cheap cant believe it hasn't sold every thing is going on ebay very soon

blink182house · 01-05-2009, 08:56 AM

amazing prices, wish i wouldnt have already bought a lot of that stuff!!! best of luckt o you!!!

are you willing to sell throttle cable bracket (that is on intake mani)? I'ma assuming you're using freddy intake mani and s13 dohc throttle cable, i need bracket! paypal ready, shipped to 38632, PM me back!

are you trying to sell engine damper, oil filter relocation, brake master heat shield?

ANVIL · 01-05-2009, 09:30 AM

interested in the lsd+axles if you decide you want to ship. pm me if you change your mind

Racer X · 01-05-2009, 04:59 PM

Quote:

amazing prices, wish i wouldnt have already bought a lot of that stuff!!! best of luckt o you!!!

are you willing to sell throttle cable bracket (that is on intake mani)? I'ma assuming you're using freddy intake mani and s13 dohc throttle cable, i need bracket! paypal ready, shipped to 38632, PM me back!

are you trying to sell engine damper, oil filter relocation, brake master heat shield?

the bracket is just a modified stock one. cable is stock ka24e. make offers on the rest of the stuff if its good ill sell,

I cant believe this stuff has not sold at these prices, I taking huge losses

Quote:

interested in the lsd+axles if you decide you want to ship. pm me if you change your mind

I'll ship it but I don't even want to think of what its going to cost

blink182house · 01-05-2009, 07:53 PM

im not sure of brand or really a price for the items i requested man, if you want, just give me a price on them and shoot me a pm. thanks and glws!

Racer X · 01-05-2009, 09:52 PM

Quote:

im not sure of brand or really a price for the items i requested man, if you want, just give me a price on them and shoot me a pm. thanks and glws!
Yesterday 11:59 PM

pm sent, so let me know

jmauld · 01-06-2009, 08:53 AM

Quote:

Originally Posted by Racer X

Big brake kit for the front comes with willwood calipers, pads clips brackets s lines etc, brembo 13" single piece rotors,(five lug)
$500 (1k miles maybe) shipped

Do you have any pictures of this setup?

Can you provide details on which calipers you're using (including the piston diameter), what mounting bracket, and is the rotor an off the shelf unit from another car? If not, where can replacements be purchased.

If I were to get the front kit, would you supply details on the two piece rotor that you're using so I could duplicate that?

12-21-2008, 12:13 PM	#1
Racer X Zilvia Junkie Join Date: Apr 2002 Location: brooklyn park Age: 41 Posts: 334 Trader Rating: (2) Feedback Score: 2 reviews	Big brakes/five lug /clutch flywheel/Intercooler+radiator/misc I have a stacked Intercooler (spearco)/Radiator(hpi 12x24x3) combo comes with hot and cold pipes (set op for greddy intake manifold for s13), mounts rad hoses, couplers t bolt clamps, blow off valve (blitz super sound) electric fans. I have $1300 invested in to this set up SOLD shipped I have Jun chromoly flywheel and custom made clutch kit. (Act full face disk and Clutchnet.com double diaphragm pressure plate. (twice the normal clamping force) this set up held 22psi out of a gt3071r no problems has about 300 miles on it. very smooth to drive with SOLD 5zigen fire ball exhaust+ greddy down pipe+ test pipe welded in $100 pick up only Big brake kit for the front comes with willwood calipers, pads clips brackets s lines etc, brembo 13" single piece rotors,(five lug) SOLD 300z rear brake kit with ss lines and brembo cross drilled rotors SOLD (6k miles) shipped five lug swap with s14 knuckles. Oem bearings, no cheap ass aftermarket conversion shit that doesn't hold up SOLD shipped less than 6k miles (one rear bearing in brand new sr20det coils $15 each shipped sr20det cas $sold freddy oil pan $25 shipped blacktop valve cover $30 shipped 300zx NA limited slip with j30 axles $175 pick up only Nex racing bucket with brackets $75 pick up only Jdm S14 front bumper (unpainted) sold water pumps/ stock sr20det oil pans, other misc parts $15 shipped All Items are best offer, I need this stuff out of my garage 612 242 7428 leave a message if I don't answer I'll call back thanks Mike __________________ Twin67 ls1/awd in the works Last edited by Racer X; 01-10-2009 at 05:32 AM..

12-22-2008, 05:28 AM	#6
Racer X Zilvia Junkie Join Date: Apr 2002 Location: brooklyn park Age: 41 Posts: 334 Trader Rating: (2) Feedback Score: 2 reviews	All pm's replied to. __________________ Twin67 ls1/awd in the works

12-22-2008, 04:58 PM	#8
Racer X Zilvia Junkie Join Date: Apr 2002 Location: brooklyn park Age: 41 Posts: 334 Trader Rating: (2) Feedback Score: 2 reviews	I keep getting price shipped price pm's the price includes shipping in the 48 states unless noted __________________ Twin67 ls1/awd in the works

12-23-2008, 05:08 AM	#9
Racer X Zilvia Junkie Join Date: Apr 2002 Location: brooklyn park Age: 41 Posts: 334 Trader Rating: (2) Feedback Score: 2 reviews	pics of the clutch are right on top __________________ Twin67 ls1/awd in the works

01-03-2009, 11:06 AM	#12
singlecamslam Post Whore! Join Date: Apr 2008 Location: Norcal Posts: 2,534 Trader Rating: (10) Feedback Score: 10 reviews	pics of oil pan? dents? __________________ Nothing says racecar like a stock car with no interior.

12-21-2008, 01:29 PM	#2
jsasrsr Zilvia Junkie Join Date: Feb 2008 Location: Stationed in...Germany Age: 34 Posts: 419 Trader Rating: (6) Feedback Score: 6 reviews	pmd you on the brake kit...

12-21-2008, 01:36 PM	#3
traxx07 Nissanaholic! Join Date: Dec 2008 Location: San Antonio, TX Age: 35 Posts: 1,988 Trader Rating: (63) Feedback Score: 63 reviews	fmic ? price ?

12-21-2008, 02:49 PM	#5
andmattsayd Zilvia FREAK! Join Date: Aug 2007 Location: Stranded Age: 34 Posts: 1,146 Trader Rating: (3) Feedback Score: 3 reviews	you have PM's.

12-22-2008, 07:28 AM	#7
boostlee Leaky Injector Join Date: Apr 2005 Location: miami Posts: 94 Trader Rating: (3) Feedback Score: 3 reviews	Hey, can u send me pics of the clutch and flywheel, also might just go with the oil pan. lmk.

01-03-2009, 12:14 AM	#10
Volchok Zilvia Junkie Join Date: Sep 2007 Location: las vegas Age: 48 Posts: 374 Trader Rating: (16) Feedback Score: 16 reviews	does that oil pan have 1/8 NPT ports on it for additional sensors?

01-03-2009, 10:30 AM	#11
CamryOnBronze Post Whore! Join Date: Oct 2008 Location: MI Age: 38 Posts: 3,916 Trader Rating: (131) Rides Gallery: CamryOnBronze Feedback Score: 131 reviews	Did the brakes ever sell?

01-03-2009, 06:04 PM	#13
DRFT180 Zilvia Addict Join Date: Nov 2003 Location: Louisiana Posts: 656 Trader Rating: (7) Feedback Score: 7 reviews	Willing to split up the 5-lug stuff? I need S14 front hubs with the spindles __________________ S14 Build

01-03-2009, 07:43 PM	#14
dangarnett Leaky Injector Join Date: Feb 2008 Location: San Diego Posts: 124 Trader Rating: (4) Feedback Score: 4 reviews	I'm very interested in the rear 300z brakes, pm'd u __________________

01-04-2009, 03:31 AM	#15
reccakun08 Zilvia FREAK! Join Date: Jun 2003 Location: Rockville, Maryland Age: 39 Posts: 1,090 Trader Rating: (5) Feedback Score: 5 reviews	with the front brake setup did you use stock brake master cylinder?

01-04-2009, 07:22 AM	#17
Xclusive_racer Zilvia FREAK! Join Date: Jul 2008 Location: Fort Worth, TX Age: 40 Posts: 1,245 Trader Rating: (21) Feedback Score: 21 reviews	I have a stacked Intercooler (spearco)/Radiator(hpi 12x24x3) combo comes with hot and cold pipes (set op for greddy intake manifold for s13), mounts rad hoses, couplers t bolt clamps, blow off valve (blitz super sound) electric fans. I have $1300 invested in to this set up $400 shipped Ill take this off your hands can you hold it for me until the 5th so i can see if it will fit my set up??? Im flying outtah florida today and going back to cali...please hold it for me....all that stuff is only 400$ shipped?? __________________ You Build Cheap! Your Car Will Feel and Drive Cheap!

01-04-2009, 08:15 AM	#18
Ceepo Nissanaholic! Join Date: Jan 2008 Location: Cedar City, Utah Posts: 2,007 Trader Rating: (9) Rides Gallery: Ceepo Feedback Score: 9 reviews	Would that intercooler setup fit a s14 with a s13 sr20det??? __________________ TW: http://zilvia.net/f/cars-sale/390459...d9s-coils.html

01-04-2009, 09:31 AM	#19
airforceone451 Zilvia Junkie Join Date: Feb 2007 Location: NC Posts: 546 Trader Rating: (9) Feedback Score: 9 reviews	part out the front rotors only?

01-04-2009, 09:51 AM	#20
Racer X Zilvia Junkie Join Date: Apr 2002 Location: brooklyn park Age: 41 Posts: 334 Trader Rating: (2) Feedback Score: 2 reviews	id does not come with the 2 piece rotors. im keeping those. it comes with new one piece rotors __________________ Twin67 ls1/awd in the works

01-04-2009, 10:25 AM	#21
singlecamslam Post Whore! Join Date: Apr 2008 Location: Norcal Posts: 2,534 Trader Rating: (10) Feedback Score: 10 reviews	dibs on the oil pan, waiting for pics. And i was talking about the greddy or the freddy one. __________________ Nothing says racecar like a stock car with no interior.

01-04-2009, 01:23 PM	#22
prokronic36 Leaky Injector Join Date: Oct 2008 Location: honolulu, hawaii Age: 40 Posts: 97 Trader Rating: (2) Feedback Score: 2 reviews	lmk know if you want the just sell the rear calipers to 96817 thx

01-04-2009, 04:47 PM	#23
tramp_drift240 Leaky Injector Join Date: Feb 2008 Location: Stafford VA Age: 35 Posts: 120 Trader Rating: (1) Feedback Score: 1 reviews	i believe i pm'd you about the whole five lug setup with knuckles, as a set.

01-05-2009, 05:30 AM	#24
Racer X Zilvia Junkie Join Date: Apr 2002 Location: brooklyn park Age: 41 Posts: 334 Trader Rating: (2) Feedback Score: 2 reviews	that price includes knuckles i know its cheap cant believe it hasn't sold every thing is going on ebay very soon __________________ Twin67 ls1/awd in the works

01-05-2009, 08:56 AM	#25
blink182house Zilvia Member Join Date: May 2008 Location: Memphis Posts: 217 Trader Rating: (13) Feedback Score: 13 reviews	amazing prices, wish i wouldnt have already bought a lot of that stuff!!! best of luckt o you!!! are you willing to sell throttle cable bracket (that is on intake mani)? I'ma assuming you're using freddy intake mani and s13 dohc throttle cable, i need bracket! paypal ready, shipped to 38632, PM me back! are you trying to sell engine damper, oil filter relocation, brake master heat shield? __________________ -Scott :: TRACTIONOPTIONAL.com

01-05-2009, 09:30 AM	#26
ANVIL Zilvia FREAK! Join Date: Apr 2005 Location: Anchorage, Alaska Posts: 1,174 Trader Rating: (8) Feedback Score: 8 reviews	interested in the lsd+axles if you decide you want to ship. pm me if you change your mind

01-05-2009, 07:53 PM	#28
blink182house Zilvia Member Join Date: May 2008 Location: Memphis Posts: 217 Trader Rating: (13) Feedback Score: 13 reviews	im not sure of brand or really a price for the items i requested man, if you want, just give me a price on them and shoot me a pm. thanks and glws! __________________ -Scott :: TRACTIONOPTIONAL.com