**SG Brake Line Relocation Kit S13/S14** - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

AceUp · 04-03-2013, 10:50 AM

Ace Up Motorsports is pleased to introduce the SG D.O.T approved Brake Line Relocation kit for The S13/S14 Chassis. MUST USE S13/Z32 STYLE MASTER CYLINDER. The Kit is used to eliminate the clutter of hard lines that run across the firewall which everyone knows is ugly. When ordering you have the option of adding a matching clutch line as well. Professional Installation is Required. Comes with 3 Banjo Bolts and 6 Crush washers. Available In Gray or Blue

Price $200 Shipped or $255 with Clutch Line

Visit www.aceupmotorsports.com/SGbrakelinekit

Duke89 · 04-03-2013, 10:52 AM

Does this give any spongy feel to the breaks? I like the idea and if not ill be ordering a set in the near future and the old lines are rounded off. And of course In the way.

slider2828 · 04-03-2013, 11:07 AM

Can you show better pictures of the line routing? Very interested

Duke89 · 04-03-2013, 11:48 AM

Quote:

Originally Posted by slider2828

Can you show better pictures of the line routing? Very interested

Looks like it just goes straight down and zip tied to the front xmember and the back on the other side.

AceUp · 04-03-2013, 05:30 PM

We did not feel a difference in pedal pressure on any of our test cars. The lines are simply ran from the master down to the subframe and up on the other side. We never designed a set way to mount it as everyones setup is different so it can be secured however the owner sees fit. The lines also allow you to run a Pathfinder master cylinder for guys who are running bigger top mount turbos and want the lines to be further away from the exhaust housing/downpipe. There are a couple board members that already have them and I would love for them to chip their ideas and thoughts!

Davidna2fi · 04-03-2013, 07:04 PM

Wow looks awesome! I think I'm going to have to get one soon. Would definitely complete the new tucked look in my engine bay, no wires anywhere, even running along wheel wells.

2LiterTurbo · 04-03-2013, 10:46 PM

Do you guys know how much psi they can handle? Im interested..thanks

AceUp · 04-04-2013, 05:02 PM

Quote:

Originally Posted by 2LiterTurbo

Do you guys know how much psi they can handle? Im interested..thanks

They Are Tested At 4,000Psi And Rated At 3,000. Everything Is Assembled Here In Arizona

BiG MiKE86 · 05-16-2013, 09:56 AM

I noticed on your website someone mentioned the banjo bolts were a tad long and had to be replaced.. Has this issue been addressed? If so... I wants

Exotic Drift · 05-17-2013, 05:00 PM

Just bought sime

BiG MiKE86 · 05-18-2013, 10:02 PM

Quote:

Originally Posted by Exotic Drift

Just bought sime

How's the fitment?

Sent from my iPhone using Tapatalk 2

BiG MiKE86 · 05-22-2013, 08:06 AM

Quote:

Originally Posted by BiG MiKE86

I noticed on your website someone mentioned the banjo bolts were a tad long and had to be replaced.. Has this issue been addressed? If so... I wants

Anyone? Plz respond... Want a set

titopr06 · 05-22-2013, 08:39 AM

^ these are awesome! I had that issue with my kit but vitaly from
Ace sent me the correct ones asap. Good guys overthere.

BiG MiKE86 · 05-22-2013, 08:43 AM

Quote:

Originally Posted by titopr06

^ these are awesome! I had that issue with my kit but vitaly from
Ace sent me the correct ones asap. Good guys overthere.

Thanks for the response! Ill be ordering a set today

Sent from my iPhone using Tapatalk 2

Exotic Drift · 05-25-2013, 12:18 PM

Quote:

Originally Posted by BiG MiKE86

Thanks for the response! Ill be ordering a set today

Sent from my iPhone using Tapatalk 2

Yes they are great. Quality. They fixed the banjo bolt problem.

EmporioJason · 05-31-2013, 11:40 PM

Looks like it just goes downward and zip linked with the top part rmember and the back on the other part is just pretty much fascinating.

limo services | sydney limousine | sydney limousine service

gman-s14 · 06-02-2013, 05:32 PM

just ordered mine--hope this work out with the top mount turbo kit...

2tonecoupegrl · 06-02-2013, 06:03 PM

Wow those teal lines are kinda nice!

*dawagarage* · 06-02-2013, 08:13 PM

what are the lengths of the lines?
or can you name them in order longest to shortest/shortest to longest.
aka what is the bleeding procedure

Duke89 · 06-11-2013, 09:34 AM

Question website states that these must be used with s13 master cyl. Would it not be the same for us guys running 300zx master cyl. The OEM lines bolt right up, why won't these?

Duke89 · 06-11-2013, 10:07 AM

Nvm went back and read your first post lol.

BiG MiKE86 · 06-12-2013, 06:57 PM

In what order do the lines get installed in on the master cylinder?

Sent from my iPhone using Tapatalk 2

rbs14kouki · 07-02-2013, 10:02 PM

So this works on z32 master cylinder usmd and jdm ?

04-03-2013, 10:50 AM	#1
AceUp Zilvia Member Join Date: Mar 2008 Location: Phoenix, AZ Posts: 235 Trader Rating: (5) Feedback Score: 5 reviews	SG Brake Line Relocation Kit S13/S14 Ace Up Motorsports is pleased to introduce the SG D.O.T approved Brake Line Relocation kit for The S13/S14 Chassis. MUST USE S13/Z32 STYLE MASTER CYLINDER. The Kit is used to eliminate the clutter of hard lines that run across the firewall which everyone knows is ugly. When ordering you have the option of adding a matching clutch line as well. Professional Installation is Required. Comes with 3 Banjo Bolts and 6 Crush washers. Available In Gray or Blue Price $200 Shipped or $255 with Clutch Line Visit www.aceupmotorsports.com/SGbrakelinekit __________________ www.aceupmotorsports.com

04-03-2013, 11:07 AM	#3
slider2828 Post Whore! Join Date: Oct 2004 Location: San Francisco, CA Posts: 5,998 Trader Rating: (13) Feedback Score: 13 reviews	Can you show better pictures of the line routing? Very interested __________________ Turn and Burn!

04-03-2013, 05:30 PM	#5
AceUp Zilvia Member Join Date: Mar 2008 Location: Phoenix, AZ Posts: 235 Trader Rating: (5) Feedback Score: 5 reviews	We did not feel a difference in pedal pressure on any of our test cars. The lines are simply ran from the master down to the subframe and up on the other side. We never designed a set way to mount it as everyones setup is different so it can be secured however the owner sees fit. The lines also allow you to run a Pathfinder master cylinder for guys who are running bigger top mount turbos and want the lines to be further away from the exhaust housing/downpipe. There are a couple board members that already have them and I would love for them to chip their ideas and thoughts! __________________ www.aceupmotorsports.com

05-16-2013, 09:56 AM	#9
BiG MiKE86 Nissanaholic! Join Date: Mar 2007 Location: Ft. Lauderdale Age: 37 Posts: 1,776 Trader Rating: (12) Feedback Score: 12 reviews	I noticed on your website someone mentioned the banjo bolts were a tad long and had to be replaced.. Has this issue been addressed? If so... I wants __________________

05-31-2013, 11:40 PM	#16
EmporioJason Join Date: May 2013 Location: USA Age: 38 Posts: 15 Trader Rating: (0) Feedback Score: 0 reviews	Looks like it just goes downward and zip linked with the top part rmember and the back on the other part is just pretty much fascinating. limo services \| sydney limousine \| sydney limousine service Last edited by EmporioJason; 10-27-2015 at 04:46 AM..

04-03-2013, 10:52 AM	#2
Duke89 Zilvia Junkie Join Date: Jan 2009 Location: columbia Posts: 330 Trader Rating: (1) Feedback Score: 1 reviews	Does this give any spongy feel to the breaks? I like the idea and if not ill be ordering a set in the near future and the old lines are rounded off. And of course In the way.

04-03-2013, 07:04 PM	#6
Davidna2fi Zilvia Junkie Join Date: May 2008 Location: Houston, TX Posts: 513 Trader Rating: (18) Feedback Score: 18 reviews	Wow looks awesome! I think I'm going to have to get one soon. Would definitely complete the new tucked look in my engine bay, no wires anywhere, even running along wheel wells.

04-03-2013, 10:46 PM	#7
2LiterTurbo Zilvia Junkie Join Date: Apr 2011 Location: Las Vegas, Nevada Posts: 483 Trader Rating: (16) Feedback Score: 16 reviews	Do you guys know how much psi they can handle? Im interested..thanks

05-17-2013, 05:00 PM	#10
Exotic Drift Zilvia Addict Join Date: Oct 2012 Location: los angeles Age: 33 Posts: 615 Trader Rating: (4) Feedback Score: 4 reviews	Just bought sime

05-22-2013, 08:39 AM	#13
titopr06 Zilvia Junkie Join Date: May 2008 Location: AL Posts: 381 Trader Rating: (68) Feedback Score: 68 reviews	^ these are awesome! I had that issue with my kit but vitaly from Ace sent me the correct ones asap. Good guys overthere.

06-02-2013, 05:32 PM	#17
gman-s14 Zilvia Member Join Date: Jun 2009 Location: northern nj Posts: 174 Trader Rating: (9) Feedback Score: 9 reviews	just ordered mine--hope this work out with the top mount turbo kit...

06-02-2013, 06:03 PM	#18
2tonecoupegrl Zilvia FREAK! Join Date: Aug 2012 Location: over the river and through the woods Posts: 1,236 Trader Rating: (134) Feedback Score: 134 reviews	Wow those teal lines are kinda nice! __________________ Need some parts? Send me a message!

06-02-2013, 08:13 PM	#19
dawagarage Premium Member Join Date: Sep 2006 Location: Bremerton, WA Age: 39 Posts: 2,037 Trader Rating: (23) Feedback Score: 23 reviews	what are the lengths of the lines? or can you name them in order longest to shortest/shortest to longest. aka what is the bleeding procedure __________________ formerly known as "hotboiblaze" ratsun: dawa (73 datsun 620) clublexus: properD (97 sc300)

06-11-2013, 09:34 AM	#20
Duke89 Zilvia Junkie Join Date: Jan 2009 Location: columbia Posts: 330 Trader Rating: (1) Feedback Score: 1 reviews	Question website states that these must be used with s13 master cyl. Would it not be the same for us guys running 300zx master cyl. The OEM lines bolt right up, why won't these?

06-11-2013, 10:07 AM	#21
Duke89 Zilvia Junkie Join Date: Jan 2009 Location: columbia Posts: 330 Trader Rating: (1) Feedback Score: 1 reviews	Nvm went back and read your first post lol.

06-12-2013, 06:57 PM	#22
BiG MiKE86 Nissanaholic! Join Date: Mar 2007 Location: Ft. Lauderdale Age: 37 Posts: 1,776 Trader Rating: (12) Feedback Score: 12 reviews	In what order do the lines get installed in on the master cylinder? Sent from my iPhone using Tapatalk 2 __________________

07-02-2013, 10:02 PM	#23
rbs14kouki Zilvia Addict Join Date: Oct 2007 Location: Montreal , Canada Age: 37 Posts: 817 Trader Rating: (1) Feedback Score: 1 reviews	So this works on z32 master cylinder usmd and jdm ? __________________ AV FABRICATION Built thread sr20vet s14 http://zilvia.net/f/showthread.php?t=535574