|
For Sale Items Post items for sale here. ABSOLUTELY NO COMMERCIAL SALES. |
|
Thread Tools | Display Modes |
06-22-2019, 11:51 AM | #1 |
Leaky Injector
Join Date: May 2010
Location: Brandon, Florida
Posts: 132
Trader Rating: (2)
Feedback Score: 2 reviews
|
Full SR20det Swap for sale
Parting it out since no hits on the complete swap. Just folks needing parts so I am going that route... Remember everything is OBO
MOTOR Sr20det Black Top $1500 Stock Internals Tomei Rocker Arm Stoppers(installed) Garret Turbo (S15) SOLD Turbo Down Piping APEX Head gasket(installed) Tomei Exhaust Manifold Ram Horn Exhaust manifold T3 (BNIB) $400 Newly Installed Valve cover gasket(installed) P2M Upgraded Coil Packs $100 Injector Dynamics 760cc $300 HKS Wastegate SOLD OBX Fuel Rail $100 Greddy Intake Manifold $700 Transmission Sr20det Transmission $200 Short Shifter (installed) Redline Tranny Fluid(installed) SPEC Stage 3 Clutch kit 4 puck(installed) Exedy Lightweight Flywheel(installed) New Clutch Slave Electronics AEM ECU Series 1 $700 Greddy Boost Controller $100 Greddy Turbo Timer $100 MISC KA Transmission (no grinds) $150 IC Piping $40 Turbo Intake Piping APEX air filter with Adapter kit Rebuilt AC compressor$100 OEM Diff Gears (No Pumpkin)$50 PM me for anymore details or pics Last edited by actiew; 08-17-2019 at 07:15 AM.. Reason: updated info |
Sponsored Links |
06-23-2019, 09:31 AM | #2 |
Post Whore!
Join Date: Jul 2005
Location: South Florida
Age: 41
Posts: 4,829
Trader Rating: (17)
Feedback Score: 17 reviews
|
Addl info that would be good for people looking and help sell for you:
S13 or S14 engine Year of engine and model of original ECU (WC, J4, 62, E5, NA) How many miles on it (Estimated) Compression test results |
06-27-2019, 06:23 AM | #5 |
Leaky Injector
Join Date: May 2010
Location: Brandon, Florida
Posts: 132
Trader Rating: (2)
Feedback Score: 2 reviews
|
It is an S13 SR20det Black Top, Just has a Red valve cover. You can tell its a black top by the heat sinks right under the valve cover in the front area of the engine. Also because I purchased it from JDM Miami years ago and picked it up my self. Also its an S13 because it doesnt have the VCT.
I have driven this car with no issues so never had a need for a compression test nothing is blown just upgrade to a RB/ CD00A swap and just put it out there for sale. All work on car was done a Proven Power so if anything was ever wrong it was corrected then and there. For the stock ECU I sold that years ago already, the swap is coming with an AEM Series 1 ecu to run the car that has already been tuned by Darrel at Proven power Actually the turbo was purchased from FRsports years ago and is a T28 because I had to purchase the reclocking kit for it also. Plus it is dual ball Bearing and had it completely rebuilt at Boost Lab early last year. Same with the injectors they flow tested and cleaned for me also. I don't know the mileage on the car. I have an NX1600 Cluster in my S13 that the Odo doesn't move anymore, plus its in KPH since I brought it out of Malaysia off eBay years ago Anymore questions just let me know. Everything works not a scam, just remember how hard it was for me getting into the scene and purchasing piece by piece by piece. Just trying to get someone on the road sooner than later and save them some time and heartache |
06-27-2019, 06:25 AM | #6 |
Leaky Injector
Join Date: May 2010
Location: Brandon, Florida
Posts: 132
Trader Rating: (2)
Feedback Score: 2 reviews
|
For the turbo I will also take it out the Box and take a picture of the housing to show what it is for anyone. Pulling the motor out of the car piece by piece and just cleaning and boxing them up and putting them on the shelf.
|
06-28-2019, 08:56 AM | #8 |
Leaky Injector
Join Date: May 2010
Location: Brandon, Florida
Posts: 132
Trader Rating: (2)
Feedback Score: 2 reviews
|
Guess so that's why I put or OBO. Mine actually come with a lot of complimenting parts to just drop it in and you already on the road instead of having t look at it in your garage for another six months to get all the appropriate add on. One stop shop here. Folks still like the SR and we all start out some place
|
06-28-2019, 09:06 AM | #9 |
Leaky Injector
Join Date: May 2010
Location: Brandon, Florida
Posts: 132
Trader Rating: (2)
Feedback Score: 2 reviews
|
Also, this is a PART OUT also if those looking for individual pieces to complete their own builds. Thanks for the bump mewantkouki
GLWS if I had saw your posting two months prior would have probably picked that up off you. But Ill let folks in my area know if anyone is looking for an RB... |
07-02-2019, 08:23 AM | #11 |
Leaky Injector
Join Date: May 2010
Location: Brandon, Florida
Posts: 132
Trader Rating: (2)
Feedback Score: 2 reviews
|
@ Po_31 hey man sorry for the late reply. Are you just looking for he turbo or the manifold also? I have a Tomei Supreme manifold and a Ram Horn (BNIB) manifold with it also. Let me know. The turbo was rebuilt lil bit over a year ago with minimal driving on it by Boost Lab here in Tampa
|
07-16-2019, 09:53 AM | #16 |
Leaky Injector
Join Date: May 2010
Location: Brandon, Florida
Posts: 132
Trader Rating: (2)
Feedback Score: 2 reviews
|
Just got back from NYC wasnt watching this post. Updated the list on a few parts that sold already. If you still interested pm me and we can talk numbers. But if you located in Arkansas still i am not shipping anything that far. Not dealing with the hassle again. Been there done that and hated it
|
11-20-2019, 02:56 PM | #24 | |
Zilvia Member
Join Date: Oct 2012
Location: Bozeman, MT
Age: 38
Posts: 263
Trader Rating: (8)
Feedback Score: 8 reviews
|
Quote:
I assume not since the turbo you were going to run was internal wastegate.
__________________
|
|
Bookmarks |
|
|