AL Brian crower built Sr20det swap for sale and more - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

ryder2101 · 09-04-2014, 11:14 AM

Hey. As title says I'm selling these items

Sr20det

Garret t25 turbo with tubular manifold with some oil/water lines. Internal waste gate 7psi. 0 In and out play. 0.002 to 0.003 side to side. Read in thousands comes with front piping piece

Spec*stage*2*clutch with*pressure*plate*only has 1k miles on it.

Asking 200 for turbo setup

150 for*clutch*setup.*

Sr20det*swap. $1750

Engine is fully disassembled*

Brian crower built head only 500 miles on it
Stock bottom end*
Has most of the accessories
Everything is bagged and tagged

Story on the motor. The guy I got the motor from thought it had a blown head gasket. The motor had a metal gasket on it and when I went and picked up the motor the gasket was fine. It didn't blow a head gasket. Come to find out the maf was wired wrong and it sent ecu into limp mode. Which made car blow black smoke and not rev past 3200 rpm. The guy assumed it was a head gasket and disassembled the motor. I've looked the motor over and head looks great, cylinder walls look great as well as the pistons. It has greddy light weight pulleys aftermarket oil pan, and a Brian crowler built head, swap comes with everything from oil pan to intake manifold. I'll even throw in the tubular manifold and spec clutch if i get price i want for it.*

Sorry for no pics text message me for pics. I'm willing to ship at buyers expense shipping will be a good bit for turbo and manifold.*

Text for pics. 205 369-0673. I won't respond to pm's

ryder2101 · 09-04-2014, 04:20 PM

Sr20det forsale brain crower head: http://youtu.be/Y89DE5xHFVY

ryder2101 · 09-04-2014, 04:33 PM

Sr20det forsale brain crower head: http://youtu.be/Y89DE5xHFVY

Aflak4u · 09-04-2014, 04:54 PM

What size cams are those and how much for them?

ryder2101 · 09-04-2014, 07:23 PM

They are stock cams. Everything else is brian crower tho. Also to everyone who reads this the sr20det swap will not be parted out. I'm selling as a full swap have everything from oil pan all the way up to coil packs. It's a turn key swap all it needs is reassembly. Everything is bagged and tagged. 1750 obo

ryder2101 · 09-05-2014, 05:45 PM

Bump.. anyone want to obo?

tcx · 09-06-2014, 06:39 PM

will you sell just the head?

ryder2101 · 09-08-2014, 01:39 PM

No sorry selling as a whole

s14sfreakaleak · 09-08-2014, 10:54 PM

irvbiefbvepvnpweorvbneqo;rveqrv

ryder2101 · 09-14-2014, 01:03 AM

Bump. Sorry I think it would be insane to ship the entire motor. And I've never shipped that much before. Do you have experience shipping motors? If so hit me up and I'll see how much to Ship the whole sr20

ryder2101 · 09-15-2014, 12:25 AM

Bump. I need the motor sold soon to pay for some court fees. Someone make me a decent offer for the while swap and come get it. Don't beat me up to much on the price it's a really good motor swap I just need it gone. So opened up to lowballerz. Don't hurt me to bad

ryder2101 · 09-16-2014, 06:50 PM

Bump to the top. Low ballers welcome

ryder2101 · 09-20-2014, 01:12 AM

Bump. I seriously can't believe Noone wants to make a offer for this motor. It's a great motor. Would yall be interested if I assembled it? What better way to know what shape ur Sr20det motor swap is In. You can look right at everything. And I have every nut and bold in bags and everything tagged for easy assembly

rollinsstewart · 09-20-2014, 01:49 AM

I'm interested in the turbo and the clutch setup but it will be a bit until I have the money, I'll keep ya posted

ka-t · 09-20-2014, 02:25 AM

how do you know its a great motor did you put it back together and run it ?
did you take the block to get cleaned and magnafluxed ?

ryder2101 · 09-29-2014, 12:39 PM

Cause I'm not a idiot. I'm a machinist and checked specs on everything and checked wear on everything. I hate people that act like I don't know what I'm selling. I see idiots paying 2k for a motor swap they know nothing about. I'm selling a swap that you can see with your own eyes. And tell that the motor is perfect. Maybe if I had it assembled with unknown condition these kids would buy it for 2k.

Rant over. Sorry it's just stupid. Watch the video. Come look at it. You won't be disappointed. I've owned a lot of these motors

ryder2101 · 09-29-2014, 12:41 PM

I ain't giving it away cause it's not assembled tho. I'll assemble it and ask more.

ryder2101 · 10-02-2014, 11:27 AM

Bump. Someone make offer..

Briou · 10-28-2014, 03:43 PM

If you ever decide to sell just the head shoot me a PM

09-04-2014, 11:14 AM	#1
ryder2101 Leaky Injector Join Date: Dec 2012 Location: Alabama Age: 37 Posts: 65 Trader Rating: (0) Feedback Score: 0 reviews	Brian crower built Sr20det swap for sale and more Hey. As title says I'm selling these items Sr20det Garret t25 turbo with tubular manifold with some oil/water lines. Internal waste gate 7psi. 0 In and out play. 0.002 to 0.003 side to side. Read in thousands comes with front piping piece Specstage2clutch withpressureplateonly has 1k miles on it. Asking 200 for turbo setup 150 forclutchsetup.* Sr20detswap. $1750 Engine is fully disassembled Brian crower built head only 500 miles on it Stock bottom end* Has most of the accessories Everything is bagged and tagged Story on the motor. The guy I got the motor from thought it had a blown head gasket. The motor had a metal gasket on it and when I went and picked up the motor the gasket was fine. It didn't blow a head gasket. Come to find out the maf was wired wrong and it sent ecu into limp mode. Which made car blow black smoke and not rev past 3200 rpm. The guy assumed it was a head gasket and disassembled the motor. I've looked the motor over and head looks great, cylinder walls look great as well as the pistons. It has greddy light weight pulleys aftermarket oil pan, and a Brian crowler built head, swap comes with everything from oil pan to intake manifold. I'll even throw in the tubular manifold and spec clutch if i get price i want for it.* Sorry for no pics text message me for pics. I'm willing to ship at buyers expense shipping will be a good bit for turbo and manifold.* Text for pics. 205 369-0673. I won't respond to pm's Last edited by ryder2101; 09-04-2014 at 11:14 AM.. Reason: Had to fix issues

09-06-2014, 06:39 PM	#7
tcx Join Date: Aug 2014 Location: asheville nc Posts: 1 Trader Rating: (0) Feedback Score: 0 reviews	sr20 head will you sell just the head?

09-08-2014, 10:54 PM	#9
s14sfreakaleak Join Date: Aug 2014 Location: CA Posts: 41 Trader Rating: (0) Feedback Score: 0 reviews	irvbiefbvepvnpweorvbneqo;rveqrv Last edited by s14sfreakaleak; 04-11-2017 at 09:59 PM..

09-04-2014, 04:20 PM	#2
ryder2101 Leaky Injector Join Date: Dec 2012 Location: Alabama Age: 37 Posts: 65 Trader Rating: (0) Feedback Score: 0 reviews	Sr20det forsale brain crower head: http://youtu.be/Y89DE5xHFVY

09-04-2014, 04:33 PM	#3
ryder2101 Leaky Injector Join Date: Dec 2012 Location: Alabama Age: 37 Posts: 65 Trader Rating: (0) Feedback Score: 0 reviews	Sr20det forsale brain crower head: http://youtu.be/Y89DE5xHFVY

09-04-2014, 04:54 PM	#4
Aflak4u Leaky Injector Join Date: Jan 2013 Location: Baton Rouge Posts: 88 Trader Rating: (0) Feedback Score: 0 reviews	What size cams are those and how much for them?

09-04-2014, 07:23 PM	#5
ryder2101 Leaky Injector Join Date: Dec 2012 Location: Alabama Age: 37 Posts: 65 Trader Rating: (0) Feedback Score: 0 reviews	They are stock cams. Everything else is brian crower tho. Also to everyone who reads this the sr20det swap will not be parted out. I'm selling as a full swap have everything from oil pan all the way up to coil packs. It's a turn key swap all it needs is reassembly. Everything is bagged and tagged. 1750 obo

09-05-2014, 05:45 PM	#6
ryder2101 Leaky Injector Join Date: Dec 2012 Location: Alabama Age: 37 Posts: 65 Trader Rating: (0) Feedback Score: 0 reviews	Bump.. anyone want to obo?

09-08-2014, 01:39 PM	#8
ryder2101 Leaky Injector Join Date: Dec 2012 Location: Alabama Age: 37 Posts: 65 Trader Rating: (0) Feedback Score: 0 reviews	No sorry selling as a whole

09-14-2014, 01:03 AM	#10
ryder2101 Leaky Injector Join Date: Dec 2012 Location: Alabama Age: 37 Posts: 65 Trader Rating: (0) Feedback Score: 0 reviews	Bump. Sorry I think it would be insane to ship the entire motor. And I've never shipped that much before. Do you have experience shipping motors? If so hit me up and I'll see how much to Ship the whole sr20

09-15-2014, 12:25 AM	#11
ryder2101 Leaky Injector Join Date: Dec 2012 Location: Alabama Age: 37 Posts: 65 Trader Rating: (0) Feedback Score: 0 reviews	Bump. I need the motor sold soon to pay for some court fees. Someone make me a decent offer for the while swap and come get it. Don't beat me up to much on the price it's a really good motor swap I just need it gone. So opened up to lowballerz. Don't hurt me to bad

09-16-2014, 06:50 PM	#12
ryder2101 Leaky Injector Join Date: Dec 2012 Location: Alabama Age: 37 Posts: 65 Trader Rating: (0) Feedback Score: 0 reviews	Bump to the top. Low ballers welcome

09-20-2014, 01:12 AM	#13
ryder2101 Leaky Injector Join Date: Dec 2012 Location: Alabama Age: 37 Posts: 65 Trader Rating: (0) Feedback Score: 0 reviews	Bump. I seriously can't believe Noone wants to make a offer for this motor. It's a great motor. Would yall be interested if I assembled it? What better way to know what shape ur Sr20det motor swap is In. You can look right at everything. And I have every nut and bold in bags and everything tagged for easy assembly

09-20-2014, 01:49 AM	#14
rollinsstewart Join Date: Jul 2014 Location: Raleigh, NC Age: 28 Posts: 39 Trader Rating: (0) Feedback Score: 0 reviews	I'm interested in the turbo and the clutch setup but it will be a bit until I have the money, I'll keep ya posted

09-20-2014, 02:25 AM	#15
ka-t Leaky Injector Join Date: Aug 2005 Location: Arizona Posts: 128 Trader Rating: (0) Feedback Score: 0 reviews	how do you know its a great motor did you put it back together and run it ? did you take the block to get cleaned and magnafluxed ?

09-29-2014, 12:39 PM	#16
ryder2101 Leaky Injector Join Date: Dec 2012 Location: Alabama Age: 37 Posts: 65 Trader Rating: (0) Feedback Score: 0 reviews	Cause I'm not a idiot. I'm a machinist and checked specs on everything and checked wear on everything. I hate people that act like I don't know what I'm selling. I see idiots paying 2k for a motor swap they know nothing about. I'm selling a swap that you can see with your own eyes. And tell that the motor is perfect. Maybe if I had it assembled with unknown condition these kids would buy it for 2k. Rant over. Sorry it's just stupid. Watch the video. Come look at it. You won't be disappointed. I've owned a lot of these motors

09-29-2014, 12:41 PM	#17
ryder2101 Leaky Injector Join Date: Dec 2012 Location: Alabama Age: 37 Posts: 65 Trader Rating: (0) Feedback Score: 0 reviews	I ain't giving it away cause it's not assembled tho. I'll assemble it and ask more.

10-02-2014, 11:27 AM	#18
ryder2101 Leaky Injector Join Date: Dec 2012 Location: Alabama Age: 37 Posts: 65 Trader Rating: (0) Feedback Score: 0 reviews	Bump. Someone make offer..

10-28-2014, 03:43 PM	#19
Briou Zilvia Member Join Date: Jun 2011 Location: Bay St. Louis, MS Age: 32 Posts: 182 Trader Rating: (3) Feedback Score: 3 reviews	If you ever decide to sell just the head shoot me a PM