Help with SR20DET Timing... - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Aaron_Moiz · 11-15-2013, 02:02 AM

Hi Guys,

Newbie here...We just did a complete rebuild of our S14 SR20DET with stage 2 BC CAMS.

The engine starts up perfect but we are having problems with timing...

When trying to set the ignition timing the marks on the pulley are way off. Is it because we are running aftermarket CAMS or is there something wrong? When we fully retard the CAS then the timing mark is at 20 Degree.

Any idea why we cant get the timing right or set it to factory specs...

Thanks...

zerodameaon · 11-15-2013, 02:58 AM

Please post in the proper spot.
http://zilvia.net/f/engine-tech/

11-15-2013, 02:02 AM	#1
Aaron_Moiz Join Date: Nov 2013 Location: NSW Posts: 4 Trader Rating: (0) Feedback Score: 0 reviews	Help with SR20DET Timing... Hi Guys, Newbie here...We just did a complete rebuild of our S14 SR20DET with stage 2 BC CAMS. The engine starts up perfect but we are having problems with timing... When trying to set the ignition timing the marks on the pulley are way off. Is it because we are running aftermarket CAMS or is there something wrong? When we fully retard the CAS then the timing mark is at 20 Degree. Any idea why we cant get the timing right or set it to factory specs... Thanks...