TX S15 sr20, tomei, doc race, Garrett, splitfire, apexi, arp, Powerfc - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Johny5 · 02-03-2015, 09:56 AM

Ok, parting out motor stuffs usually a pain in the ass so I'm gonna start with one lump sum price but I'll gladly remove pieces off the motor for a price discount and deal with selling them later seperately. That being said, here's the list of parts. This motorset is 100% running, pulls hard, comp tests great and is good to go.

S15 sr20
Tomei poncams 256/256
Apex'i hg
Arp headstuds
Tomei 550cc injectors
Doc race bottom mount t2 manifold
Garrett 2871 .64ar
Stainless water line kit
Tomei expreme turbo outlet
Spitfire coilpacks
Apex'i PowerFC L-Jetro
Z32 maf and intake
MCR factory custom valvecover
Aluminum radiator, fan and shroud
Silicone rad hoses
Kazama catch can
Spec stage3 clutch
Sr20 5speed transmission

There may be some stuff I'm forgetting, but that's the bulk of it. A great list of parts and the motor pulls hard, spools very fast.

Looking for $5500 for everything under the hood

stunnaben · 02-03-2015, 09:59 AM

Any issues with the turbo or anything? I'm interested in the manifold, turbo, cams, elbow, and power FC.

Sent from my iPhone using Tapatalk

Johny5 · 02-03-2015, 11:07 AM

If you want to do a partout that's fine, here's how my list breaks down...

Mcr valvecover $SOLD
Splifire coilpacks with yashio factory Coilpack harness $450
Apexi Powerfc Ljetro $650
Z32 maf and intake $SOLD
Garrett 2871 with stainless lines $850
Doc race manifold $625
Combined turbo/manifold/lines $1400
Transmission $150
Spec stage 3 $250
Motorset with tomei cams, stock valvecover, apexi hg, arp headstuds, intake manifold assembly minus injectors $2000
Tomei 555cc injectors $SOLD
Radiator/fan/shroud/silicone lines $200
Tomei expreme turbo elbow $125
3" catback exhaust and downpipe $200

I won't part out anything internal to the motor

lucas240sx · 02-03-2015, 11:17 AM

I will dona quick research but is the power fc different for each sr?
I'm interested if it works for s13 sr

drivinsideways88 · 02-03-2015, 11:25 AM

What king of power do you get out of this setup?

Johny5 · 02-03-2015, 11:37 AM

No it won't work

I wasn't there when it was dyno'd but this setup should be a really easy 350. Upgrade inj and maybe maf (I don't remember where z32 tops out at) and it'd be 375 or 380, knocking on needing to do Pistons though

dluevanos01 · 02-03-2015, 12:37 PM

Do you have a FPR? part it out?

Johny5 · 02-03-2015, 12:38 PM

not an aftermarket one no

S13project · 02-04-2015, 01:08 AM

first the mark2 and now this....dammit stew!

itsjustdaphne · 02-04-2015, 10:33 AM

That valve cover......
drooling...

stunnaben · 02-04-2015, 03:56 PM

Quote:

Originally Posted by Johny5

If you want to do a partout that's fine, here's how my list breaks down...

Mcr valvecover $450
Splifire coilpacks with yashio factory Coilpack harness $450
Apexi Powerfc Ljetro $650
Z32 maf and intake $100
Garrett 2871 with stainless lines $850
Doc race manifold $750
Combined turbo/manifold/lines $1500
Transmission $150
Spec stage 3 $250
Motorset with tomei cams, stock valvecover, apexi hg, arp headstuds, intake manifold assembly minus injectors $2000
Tomei 555cc injectors $450
Radiator/fan/shroud/silicone lines $200
Tomei expreme turbo elbow $125
3" catback exhaust and downpipe $200

I won't part out anything internal to the motor

Turbo manifold is 750 new from FR Sport.....

http://www.frsport.com/Bottom-Mount-...8fNxoCa3vw_wcB

kerrykerrykerry · 02-04-2015, 04:10 PM

Tomei injectors sold! To me!

Choppz · 02-04-2015, 04:15 PM

Quote:

Originally Posted by stunnaben

Turbo manifold is 750 new from FR Sport.....

http://www.frsport.com/Bottom-Mount-...8fNxoCa3vw_wcB

Your point?

stunnaben · 02-04-2015, 04:15 PM

Your asking price is high. Would you please correct prices and adjust them due to being used? I'm interested but need to know asking prices.

Sent from my iPhone using Tapatalk

Johny5 · 02-04-2015, 04:22 PM

Hey stunnaben, sorry man not out to cheat anybody I honestly didn't even know they'd ever gotten as low as $795 as originally listed. My mistake for not researching this first. How does $625 sound for the manifold?

kerrykerrykerry · 02-04-2015, 04:23 PM

Quote:

Originally Posted by stunnaben

Your asking price is high. Would you please correct prices and adjust them due to being used? I'm interested but need to know asking prices.

Sent from my iPhone using Tapatalk

He can ask whatever he wants. They're his parts. Want something? Make him an offer, ya dummy.

stunnaben · 02-04-2015, 04:26 PM

Quote:

Originally Posted by kerrykerrykerry

He can ask whatever he wants. They're his parts. Want something? Make him an offer, ya dummy.

How am I a dummy? No one would buy a used part for the same price as a new one unless it were hard to get a new one. I'm asking for legitimate pricing because I, like others actually interested in making a purchase, need valid information so as we can make a decision on purchasing. His price was the same as new pricing. I shared with him a link showing the cost new from FR Sport so that he could adjust his price if he so desired.

Sent from my iPhone using Tapatalk

frmdabak187 · 02-04-2015, 04:50 PM

+1 ^^ Take it easy kerry kerry no need to bash this for sale thread there good parts and johny5 has already replied that it was a mistake.

frmdabak187 · 02-04-2015, 05:31 PM

Johny5 Check your PM, Interested in Combined
turbo/manifold/lines/Tomei Turbo elbow/Downpipe and also the Tomei Cams

mugenworks247 · 02-04-2015, 05:59 PM

I need that catch can! And I'm possibly interested in the spitfire/yashio setup

Johny5 · 02-04-2015, 06:00 PM

catch can is sold, splitfire/yashio setup still available

frmdabak187 sent you a response

ka-tbuildup · 02-04-2015, 08:24 PM

Il take the tomei elbow, pm me and il PayPal you

frmdabak187 · 02-04-2015, 08:41 PM

Quote:

Originally Posted by Johny5

catch can is sold, splitfire/yashio setup still available

frmdabak187 sent you a response

Perfect thank you, btw i am only looking to purchase as package deal via PM. (excluding cams)

ka-tbuildup · 02-04-2015, 09:05 PM

Tomei elbow sold, thanks

Longhairflexhard · 02-04-2015, 09:42 PM

Would you happen to have the s15 crossmember by chance?

Ben10 · 02-05-2015, 02:01 AM

Price on intercooler piping?

Johny5 · 02-05-2015, 08:44 AM

The intercooler and piping are sold, there isn't a crossmember, sorry guys.

For everybody else, some of you guys have received tracking #s and some have not. Those who haven't please be patient for one more day. I was supposed to be able to get the motor out and pieced up last night but I ended up stuck on a drawn out work project that'll head into tonight. Friday/Saturday I will be pulling all the pieces and boxing/shipping them. If you don't hear from me with a tracking # by Sunday please let me know so I can make sure nothings missed. Otherwise I will be going through my paypal and pm's and taking care of everyone item by item. Thank you very much!

frmdabak187 · 02-05-2015, 06:29 PM

reply to PM when you have time please,I'm interested in the combined turbo/manifold/lines/Tomei Turbo elbow/Downpipe and also the Tomei Cams ( if you decide to disassemble)

Johny5 · 02-09-2015, 06:13 PM

ok fellas I believe every single thing is shipped that was purchased! here's some pics of the remaining items now that everythings pulled from the car.

doc rac manifold $575

took pictures inside the longblock with the tomei cams, very hard to capture the etching but confirmed they are poncams. clean lobes still, no issues, heads actually rather clean for never having been machined.

Entire longblock assembly with alt/power steering/ka24 ac compressor with adapter brackets/mounts/intake manifold assembly complete minus injectors and fuel rail/etc. $1750

hmu with any questions dudes

maker_moan · 02-09-2015, 07:43 PM

Hey bro interested in buying your gt2871r turbo

02-03-2015, 09:56 AM	#1
Johny5 Post Whore! Join Date: Dec 2002 Location: Dallas, Tx Age: 39 Posts: 3,221 Trader Rating: (9) Feedback Score: 9 reviews	S15 sr20, tomei, doc race, Garrett, splitfire, apexi, arp, Powerfc Ok, parting out motor stuffs usually a pain in the ass so I'm gonna start with one lump sum price but I'll gladly remove pieces off the motor for a price discount and deal with selling them later seperately. That being said, here's the list of parts. This motorset is 100% running, pulls hard, comp tests great and is good to go. S15 sr20 Tomei poncams 256/256 Apex'i hg Arp headstuds Tomei 550cc injectors Doc race bottom mount t2 manifold Garrett 2871 .64ar Stainless water line kit Tomei expreme turbo outlet Spitfire coilpacks Apex'i PowerFC L-Jetro Z32 maf and intake MCR factory custom valvecover Aluminum radiator, fan and shroud Silicone rad hoses Kazama catch can Spec stage3 clutch Sr20 5speed transmission There may be some stuff I'm forgetting, but that's the bulk of it. A great list of parts and the motor pulls hard, spools very fast. Looking for $5500 for everything under the hood __________________ www.stewartleask.com

02-03-2015, 11:07 AM	#3
Johny5 Post Whore! Join Date: Dec 2002 Location: Dallas, Tx Age: 39 Posts: 3,221 Trader Rating: (9) Feedback Score: 9 reviews	If you want to do a partout that's fine, here's how my list breaks down... Mcr valvecover $SOLD Splifire coilpacks with yashio factory Coilpack harness $450 Apexi Powerfc Ljetro $650 Z32 maf and intake $SOLD Garrett 2871 with stainless lines $850 Doc race manifold $625 Combined turbo/manifold/lines $1400 Transmission $150 Spec stage 3 $250 Motorset with tomei cams, stock valvecover, apexi hg, arp headstuds, intake manifold assembly minus injectors $2000 Tomei 555cc injectors $SOLD Radiator/fan/shroud/silicone lines $200 Tomei expreme turbo elbow $125 3" catback exhaust and downpipe $200 I won't part out anything internal to the motor __________________ www.stewartleask.com Last edited by Johny5; 02-04-2015 at 04:23 PM..

02-03-2015, 11:37 AM	#6
Johny5 Post Whore! Join Date: Dec 2002 Location: Dallas, Tx Age: 39 Posts: 3,221 Trader Rating: (9) Feedback Score: 9 reviews	No it won't work I wasn't there when it was dyno'd but this setup should be a really easy 350. Upgrade inj and maybe maf (I don't remember where z32 tops out at) and it'd be 375 or 380, knocking on needing to do Pistons though __________________ www.stewartleask.com

02-03-2015, 12:37 PM	#7
dluevanos01 Zilvia FREAK! Join Date: May 2011 Location: 90660 Ca Age: 30 Posts: 1,194 Trader Rating: (23) Feedback Score: 23 reviews	Do you have a FPR? part it out? __________________ IG: @te37_daniel Build thread

02-03-2015, 12:38 PM	#8
Johny5 Post Whore! Join Date: Dec 2002 Location: Dallas, Tx Age: 39 Posts: 3,221 Trader Rating: (9) Feedback Score: 9 reviews	not an aftermarket one no __________________ www.stewartleask.com

02-03-2015, 09:59 AM	#2
stunnaben Zilvia Addict Join Date: May 2009 Location: Houston, TX Age: 35 Posts: 969 Trader Rating: (4) Feedback Score: 4 reviews	Any issues with the turbo or anything? I'm interested in the manifold, turbo, cams, elbow, and power FC. Sent from my iPhone using Tapatalk

02-03-2015, 11:17 AM	#4
lucas240sx Zilvia FREAK! Join Date: Sep 2006 Location: shawnee,okl Age: 37 Posts: 1,303 Trader Rating: (16) Feedback Score: 16 reviews	I will dona quick research but is the power fc different for each sr? I'm interested if it works for s13 sr

02-03-2015, 11:25 AM	#5
drivinsideways88 Join Date: Jul 2012 Location: sequim Posts: 34 Trader Rating: (4) Feedback Score: 4 reviews	What king of power do you get out of this setup?

02-04-2015, 01:08 AM	#9
S13project Zilvia Junkie Join Date: Mar 2006 Location: dirtysouth Posts: 530 Trader Rating: (7) Feedback Score: 7 reviews	first the mark2 and now this....dammit stew! __________________

02-04-2015, 10:33 AM	#10
itsjustdaphne Zilvia Addict Join Date: Sep 2011 Location: South FL Posts: 785 Trader Rating: (12) Feedback Score: 12 reviews	That valve cover...... drooling... __________________ @ddaapphh \| @spectuned

02-04-2015, 04:10 PM	#12
kerrykerrykerry Leaky Injector Join Date: Jan 2013 Location: raleigh Age: 37 Posts: 142 Trader Rating: (4) Feedback Score: 4 reviews	Tomei injectors sold! To me!

02-04-2015, 04:15 PM	#14
stunnaben Zilvia Addict Join Date: May 2009 Location: Houston, TX Age: 35 Posts: 969 Trader Rating: (4) Feedback Score: 4 reviews	Your asking price is high. Would you please correct prices and adjust them due to being used? I'm interested but need to know asking prices. Sent from my iPhone using Tapatalk

02-04-2015, 04:22 PM	#15
Johny5 Post Whore! Join Date: Dec 2002 Location: Dallas, Tx Age: 39 Posts: 3,221 Trader Rating: (9) Feedback Score: 9 reviews	Hey stunnaben, sorry man not out to cheat anybody I honestly didn't even know they'd ever gotten as low as $795 as originally listed. My mistake for not researching this first. How does $625 sound for the manifold? __________________ www.stewartleask.com

02-04-2015, 04:50 PM	#18
frmdabak187 Zilvia Junkie Join Date: May 2014 Location: Orange County Age: 36 Posts: 527 Trader Rating: (15) Feedback Score: 15 reviews	+1 ^^ Take it easy kerry kerry no need to bash this for sale thread there good parts and johny5 has already replied that it was a mistake.

02-04-2015, 05:31 PM	#19
frmdabak187 Zilvia Junkie Join Date: May 2014 Location: Orange County Age: 36 Posts: 527 Trader Rating: (15) Feedback Score: 15 reviews	Johny5 Check your PM, Interested in Combined turbo/manifold/lines/Tomei Turbo elbow/Downpipe and also the Tomei Cams

02-04-2015, 05:59 PM	#20
mugenworks247 Leaky Injector Join Date: Dec 2007 Location: Exeter PA Age: 36 Posts: 127 Trader Rating: (1) Feedback Score: 1 reviews	I need that catch can! And I'm possibly interested in the spitfire/yashio setup

02-04-2015, 06:00 PM	#21
Johny5 Post Whore! Join Date: Dec 2002 Location: Dallas, Tx Age: 39 Posts: 3,221 Trader Rating: (9) Feedback Score: 9 reviews	catch can is sold, splitfire/yashio setup still available frmdabak187 sent you a response __________________ www.stewartleask.com

02-04-2015, 08:24 PM	#22
ka-tbuildup Join Date: Sep 2006 Location: Sanford, Maine Age: 38 Posts: 41 Trader Rating: (2) Feedback Score: 2 reviews	Il take the tomei elbow, pm me and il PayPal you

02-04-2015, 09:05 PM	#24
ka-tbuildup Join Date: Sep 2006 Location: Sanford, Maine Age: 38 Posts: 41 Trader Rating: (2) Feedback Score: 2 reviews	Tomei elbow sold, thanks

02-04-2015, 09:42 PM	#25
Longhairflexhard Join Date: Sep 2013 Location: Lville ga Age: 37 Posts: 10 Trader Rating: (0) Feedback Score: 0 reviews	Would you happen to have the s15 crossmember by chance?

02-05-2015, 02:01 AM	#26
Ben10 Leaky Injector Join Date: May 2011 Location: Houston, TX Posts: 74 Trader Rating: (1) Feedback Score: 1 reviews	Price on intercooler piping?

02-05-2015, 08:44 AM	#27
Johny5 Post Whore! Join Date: Dec 2002 Location: Dallas, Tx Age: 39 Posts: 3,221 Trader Rating: (9) Feedback Score: 9 reviews	The intercooler and piping are sold, there isn't a crossmember, sorry guys. For everybody else, some of you guys have received tracking #s and some have not. Those who haven't please be patient for one more day. I was supposed to be able to get the motor out and pieced up last night but I ended up stuck on a drawn out work project that'll head into tonight. Friday/Saturday I will be pulling all the pieces and boxing/shipping them. If you don't hear from me with a tracking # by Sunday please let me know so I can make sure nothings missed. Otherwise I will be going through my paypal and pm's and taking care of everyone item by item. Thank you very much! __________________ www.stewartleask.com

02-05-2015, 06:29 PM	#28
frmdabak187 Zilvia Junkie Join Date: May 2014 Location: Orange County Age: 36 Posts: 527 Trader Rating: (15) Feedback Score: 15 reviews	reply to PM when you have time please,I'm interested in the combined turbo/manifold/lines/Tomei Turbo elbow/Downpipe and also the Tomei Cams ( if you decide to disassemble)

02-09-2015, 06:13 PM	#29
Johny5 Post Whore! Join Date: Dec 2002 Location: Dallas, Tx Age: 39 Posts: 3,221 Trader Rating: (9) Feedback Score: 9 reviews	ok fellas I believe every single thing is shipped that was purchased! here's some pics of the remaining items now that everythings pulled from the car. doc rac manifold $575 took pictures inside the longblock with the tomei cams, very hard to capture the etching but confirmed they are poncams. clean lobes still, no issues, heads actually rather clean for never having been machined. Entire longblock assembly with alt/power steering/ka24 ac compressor with adapter brackets/mounts/intake manifold assembly complete minus injectors and fuel rail/etc. $1750 hmu with any questions dudes __________________ www.stewartleask.com Last edited by Johny5; 02-12-2015 at 12:13 PM..

02-09-2015, 07:43 PM	#30
maker_moan Zilvia Member Join Date: Jan 2013 Location: Hawaii Age: 30 Posts: 168 Trader Rating: (0) Feedback Score: 0 reviews	Hey bro interested in buying your gt2871r turbo