ND Precision billet 5857 turbo, 0 shaft play, <1000mi - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

revolutionz_s13 · 03-26-2013, 07:56 AM

Switching to a GT3076r, turbo is in perfect condition. Journal bearing. Buyer pays shipping. 4" port shrouded inlet, 4bolt out.

$650

PM if interested, or text 7zero1-six1zero-137nine.

Model:
5857

Power Class:
605hp

Compressor Wheel Diameter:
58mm

Turbine Wheel Diameter:
57mm

Pics:

revolutionz_s13 · 03-27-2013, 07:39 AM

buuuuuuuuuuuump

revolutionz_s13 · 03-27-2013, 02:42 PM

Lets go again

revolutionz_s13 · 03-29-2013, 09:35 AM

Someone take this thing off my hands

4nmscle · 03-29-2013, 10:24 AM

Awesome turbo! I have used t2 PTE turbos, the 5858, and now using the 6266. I love them. Great deal here. GLWS!

revolutionz_s13 · 04-01-2013, 08:01 AM

Any offers?

JPsNissans · 04-01-2013, 08:09 AM

Do you think the 3076R is going to spool faster? Looking for a decent spooling single turbo for a friend's 1J, I was recommending a GT3076R.
Just wondering if you are switching for better spool, I will send him a link to this thread.

revolutionz_s13 · 04-01-2013, 08:23 AM

I think for the SR it will spool slightly faster as it is a bit of a smaller turbo than the 5857. That being said, this turbo spools pretty damn hard on the SR. Main reason I'm switching is because I have a brand new 3076r sitting in my room that I was going to use for a different project, but decided to switch that to a gtx3076r, so I had to pick between these two turbo's. I figured the 5857 would be easier to sell because of the lower cost.

JPsNissans · 04-01-2013, 08:34 AM

You are probably right on the sale. Thanks for the response.

Like I said, I will let him know about this, seems like a good match for what he's looking for, 400+whp and decent spool on a 2.5L. If I wasn't already hurting for money on my current project I'd snap it up for a future one.

revolutionz_s13 · 04-01-2013, 08:37 AM

Its a good turbo. I priced it low hoping it would sell quickly, I'm suprised it hasn't yet. Thats a lot of turbo for $650.

revolutionz_s13 · 04-05-2013, 08:58 PM

up again, someone pick this up!

revolutionz_s13 · 04-13-2013, 10:54 AM

back up to the top. Someone needs a good turbo.

enriquetc240 · 04-16-2013, 10:42 PM

PMED you. lets find this snail a new home

03-26-2013, 07:56 AM	#1
revolutionz_s13 Zilvia Member Join Date: Mar 2005 Location: North Dakota Posts: 175 Trader Rating: (3) Feedback Score: 3 reviews	Precision billet 5857 turbo, 0 shaft play, <1000mi Switching to a GT3076r, turbo is in perfect condition. Journal bearing. Buyer pays shipping. 4" port shrouded inlet, 4bolt out. $650 PM if interested, or text 7zero1-six1zero-137nine. Model: 5857 Power Class: 605hp Compressor Wheel Diameter: 58mm Turbine Wheel Diameter: 57mm Pics:

03-27-2013, 07:39 AM	#2
revolutionz_s13 Zilvia Member Join Date: Mar 2005 Location: North Dakota Posts: 175 Trader Rating: (3) Feedback Score: 3 reviews	buuuuuuuuuuuump

03-27-2013, 02:42 PM	#3
revolutionz_s13 Zilvia Member Join Date: Mar 2005 Location: North Dakota Posts: 175 Trader Rating: (3) Feedback Score: 3 reviews	Lets go again

03-29-2013, 09:35 AM	#4
revolutionz_s13 Zilvia Member Join Date: Mar 2005 Location: North Dakota Posts: 175 Trader Rating: (3) Feedback Score: 3 reviews	Someone take this thing off my hands

03-29-2013, 10:24 AM	#5
4nmscle BANNED Join Date: Mar 2013 Location: Antarctica Posts: 80 Trader Rating: (0) Feedback Score: 0 reviews	Awesome turbo! I have used t2 PTE turbos, the 5858, and now using the 6266. I love them. Great deal here. GLWS!

04-01-2013, 08:01 AM	#6
revolutionz_s13 Zilvia Member Join Date: Mar 2005 Location: North Dakota Posts: 175 Trader Rating: (3) Feedback Score: 3 reviews	Any offers?

04-01-2013, 08:09 AM	#7
JPsNissans Leaky Injector Join Date: Jun 2007 Location: Merritt Island, FL. Age: 38 Posts: 64 Trader Rating: (3) Feedback Score: 3 reviews	Do you think the 3076R is going to spool faster? Looking for a decent spooling single turbo for a friend's 1J, I was recommending a GT3076R. Just wondering if you are switching for better spool, I will send him a link to this thread.

04-01-2013, 08:23 AM	#8
revolutionz_s13 Zilvia Member Join Date: Mar 2005 Location: North Dakota Posts: 175 Trader Rating: (3) Feedback Score: 3 reviews	I think for the SR it will spool slightly faster as it is a bit of a smaller turbo than the 5857. That being said, this turbo spools pretty damn hard on the SR. Main reason I'm switching is because I have a brand new 3076r sitting in my room that I was going to use for a different project, but decided to switch that to a gtx3076r, so I had to pick between these two turbo's. I figured the 5857 would be easier to sell because of the lower cost.

04-01-2013, 08:34 AM	#9
JPsNissans Leaky Injector Join Date: Jun 2007 Location: Merritt Island, FL. Age: 38 Posts: 64 Trader Rating: (3) Feedback Score: 3 reviews	You are probably right on the sale. Thanks for the response. Like I said, I will let him know about this, seems like a good match for what he's looking for, 400+whp and decent spool on a 2.5L. If I wasn't already hurting for money on my current project I'd snap it up for a future one.

04-01-2013, 08:37 AM	#10
revolutionz_s13 Zilvia Member Join Date: Mar 2005 Location: North Dakota Posts: 175 Trader Rating: (3) Feedback Score: 3 reviews	Its a good turbo. I priced it low hoping it would sell quickly, I'm suprised it hasn't yet. Thats a lot of turbo for $650.

04-05-2013, 08:58 PM	#11
revolutionz_s13 Zilvia Member Join Date: Mar 2005 Location: North Dakota Posts: 175 Trader Rating: (3) Feedback Score: 3 reviews	up again, someone pick this up!

04-13-2013, 10:54 AM	#12
revolutionz_s13 Zilvia Member Join Date: Mar 2005 Location: North Dakota Posts: 175 Trader Rating: (3) Feedback Score: 3 reviews	back up to the top. Someone needs a good turbo.

04-16-2013, 10:42 PM	#13
enriquetc240 Zilvia Member Join Date: Nov 2007 Location: Miami Posts: 219 Trader Rating: (4) Feedback Score: 4 reviews	PMED you. lets find this snail a new home