|
Engine Tech Technical discussion related to all relevant engines such as KA, SR, RB, CA, 2JZ , L24/26/28, VG, VQ, and LSx series. |
|
Thread Tools | Display Modes |
05-20-2012, 09:14 PM | #1 |
Zilvia Junkie
|
KA24DE obd2 bare minimum wiring
I need to know what wires on an obd2 s14 engine harness need power (12v) in order to have a functioning car.
The short: The car (ka24det s14) is wired on an 8 switch relay panel. No body harness. Switches for ign, start, fuel, lights, fan, blah. The engine harness is mostly in tact, after some work. After a bit of research, it seems that only the eccs relay pin 4 and ign switch pin 38 need 12v to have a running car. This proved correct, as the car does start and run, although like total shit. Am I missing power to anything else?
__________________
DRIFTINDY |
Sponsored Links |
05-20-2012, 11:17 PM | #2 |
Zilvia Junkie
|
After digging in a bit more and checking out my AEM ems wire view, looks like I need provide power to pins 56, 61, and 70. That might be why I couldn't get the ems to sync. Can anyone confirm?
__________________
DRIFTINDY |
Bookmarks |
Tags |
ecu, ka24det, obd2, s14 |
|
|