CA KA24de ITBs w/manifold, Brian Crower Cams, 6-puck clutch/flywheel, 5spd Trans - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

SR240Z · 10-12-2009, 12:02 PM

As the title states it, these are GSXR 1000 throttle bodies mated to a KA24de intake manifold. The runners were cut and then ported to smooth the transition of air flow from the throttle bodies into each individual runner. The intake manifold comes with the fuel rail that has SR20 370cc injectors installed. Sold as-is.

Price: $650 OBO

The KA24de head has a valve job with new valve seals, Cometic metal headgasket, Brian Crower 264/264 Stage 2 cams, and a new timing kit. These parts have only 100 Miles on them. Sold as-is.

Price: $650 OBO

XTD 6-puck Stage 3 clutch and Lightweight SFI rated chromoly flywheel. The clutch is stated to 288ft lbs of torque/320HP. The flywheel weighs in at only 11lbs. This setup was only used for 100 miles and you can see there is still complete clutch disc life left. Sold as-is.

Price: SOLD!!!

1992 Nissan 240sx 5spd transmission. Shifts and drives fine when we were using GM Synchromesh gear oil. Had a new Koyo throwout bearing installed 100 miles ago with the XTD Clutch/flywheel setup. Sold as-is.

Price: SOLD!!!

Driftastic · 10-12-2009, 02:10 PM

sick ITB setup. I used to have a 20V AE86 and i loved the sound and response. However those stacks look rather long, does it actually fit in between the strut towers? you got a pic of when the motor was installed?

240sxvaj · 10-12-2009, 02:56 PM

Quote:

Originally Posted by Driftastic

sick ITB setup.you got a pic of when the motor was installed?

+1 Post them up

SR240Z · 10-12-2009, 04:05 PM

Motor was previously installed in a datsun 510, not an s13:

JEDIs13 · 10-12-2009, 04:20 PM

i need that trans.. pm sent

WV350Z · 10-12-2009, 05:43 PM

what did you do part the car out???if so you wanna sell the shell??

SR240Z · 10-12-2009, 06:47 PM

Well no one wanted to pay for the car un-tuned and it was just too much of a hassle to find a decent tuner anymore for the Tec-II so we are getting rid of the KA and dropping in a complete sr20 with stock ecu and harness so we can go to our time attack and autox events.

Shell will not be sold.

180sxdrifter · 10-12-2009, 08:09 PM

any sound clips of this beast?

SR240Z · 10-13-2009, 12:55 AM

This is strictly a for sale thread for the parts ive got available. Feel free to PM me if you have any other questions otherwise but lets keep this on topic about buying/selling parts.

To answer your question anyway, i never made any video of the car running since it was never properly tuned on a dyno.

tschad · 10-14-2009, 11:00 PM

i want to know how that sounds. =]

azndummie · 10-15-2009, 02:07 AM

in the second portion of this for sale, you are selling just a built ka head and headgasket, or complete motor?

SR240Z · 10-15-2009, 08:42 AM

The bottom end of the motor is not available for sale at the moment. It is just for the built KA head with the throttle body setup.

The motor sounded very lopey with the cams and throttle bodies but sounded insane under throttle! Wish it would have been fully tuned to have made a video but there is no chance of that now so we need to part ways with the KA.

Driftastic · 10-15-2009, 10:19 AM

doesnt look like there would be enough room for some sock filters. I would love to have this but those runners are just too long. I couldnt run it without some sock filters. If you would be interested in making a set with shorter runners PM me.

SR240Z · 10-15-2009, 04:28 PM

All you have to do is cut the runners because they are mild steel. Any exhaust shop can make you runners in the length and taper that you want with their pipe expander as well.

240sxskyline · 10-15-2009, 05:05 PM

so are you selling theis bad boy?

SR240Z · 10-15-2009, 07:13 PM

I'm not selling the shell, just the parts listed for sale in this ad.

SR240Z · 10-20-2009, 12:28 AM

Clutch/Flywheel assembly sold. Everything else still available!!! Lets get some offers people

Touge_Monster · 10-20-2009, 11:48 AM

Do you still have the tranny?

bardabe · 10-21-2009, 08:07 PM

PM Sent tranny is mine.

SR240Z · 10-24-2009, 10:16 AM

Everything is still available! Best reasonable offers get whatever is available. I am not taking the cams off the head so please dont PM and ask me for that.

97KoukiFTW · 10-25-2009, 11:10 PM

Lol well wish my transmission wasn't f'd up so I could come pick yours up lol. .

jmac636 · 10-26-2009, 08:42 AM

Quote:

Originally Posted by SR240Z

Everything is still available! Best reasonable offers get whatever is available. I am not taking the cams off the head so please dont PM and ask me for that.

I know you said don't ask for just the cams but if you get desperate I need the cams. Just throwing that out there and giving you a free bump too!

SR240Z · 10-28-2009, 11:06 AM

Trans sold!! The rest of the parts are still available. I also have the start and the alternator.

foreverdark · 10-30-2009, 03:07 AM

still have the block? interested.

Geezy · 10-30-2009, 03:36 AM

what would it take for you to make another ITB set up like that and sell it to me?
just inquiring...

SR240Z · 10-30-2009, 08:54 AM

The block alone is available. Ill have to talk to my dad to see when it is ready so just PM me with your number so i can give you a call.

Why would we make another ITB setup and sell when this one is already done and ready to sell?? Buy this one and just cut the stacks a little shorter.

SR240Z · 03-19-2010, 11:38 PM

Sold the head/valve cover package.

The ITB setup is still available and so is the short block (needs new rings) which has factory Nissan oil pump, new water pump, SOHC pistons, and the alternator. Best offer on these items get it!

_readthis · 11-02-2014, 02:57 AM

How much are you asking for the itb setup?

jppierre · 11-02-2014, 06:05 AM

bruh.. this thing been dead for more than 4 years

10-12-2009, 12:02 PM	#1
SR240Z Zilvia Junkie Join Date: Apr 2004 Location: California Posts: 473 Trader Rating: (10) Feedback Score: 10 reviews	KA24de ITBs w/manifold, Brian Crower Cams, 6-puck clutch/flywheel, 5spd Trans As the title states it, these are GSXR 1000 throttle bodies mated to a KA24de intake manifold. The runners were cut and then ported to smooth the transition of air flow from the throttle bodies into each individual runner. The intake manifold comes with the fuel rail that has SR20 370cc injectors installed. Sold as-is. Price: $650 OBO The KA24de head has a valve job with new valve seals, Cometic metal headgasket, Brian Crower 264/264 Stage 2 cams, and a new timing kit. These parts have only 100 Miles on them. Sold as-is. Price: $650 OBO XTD 6-puck Stage 3 clutch and Lightweight SFI rated chromoly flywheel. The clutch is stated to 288ft lbs of torque/320HP. The flywheel weighs in at only 11lbs. This setup was only used for 100 miles and you can see there is still complete clutch disc life left. Sold as-is. Price: SOLD!!! 1992 Nissan 240sx 5spd transmission. Shifts and drives fine when we were using GM Synchromesh gear oil. Had a new Koyo throwout bearing installed 100 miles ago with the XTD Clutch/flywheel setup. Sold as-is. Price: SOLD!!! __________________ 2004 IS300 Sportcross 1JZ Last edited by SR240Z; 10-28-2009 at 11:05 AM..

10-12-2009, 04:05 PM	#4
SR240Z Zilvia Junkie Join Date: Apr 2004 Location: California Posts: 473 Trader Rating: (10) Feedback Score: 10 reviews	Motor was previously installed in a datsun 510, not an s13: __________________ 2004 IS300 Sportcross 1JZ

10-12-2009, 06:47 PM	#7
SR240Z Zilvia Junkie Join Date: Apr 2004 Location: California Posts: 473 Trader Rating: (10) Feedback Score: 10 reviews	Well no one wanted to pay for the car un-tuned and it was just too much of a hassle to find a decent tuner anymore for the Tec-II so we are getting rid of the KA and dropping in a complete sr20 with stock ecu and harness so we can go to our time attack and autox events. Shell will not be sold. __________________ 2004 IS300 Sportcross 1JZ

10-12-2009, 08:09 PM	#8
180sxdrifter Zilvia Addict Join Date: Mar 2003 Location: NYC Age: 40 Posts: 685 Trader Rating: (20) Feedback Score: 20 reviews	any sound clips of this beast? __________________ Instagram @ikigai.no.jinsei

10-13-2009, 12:55 AM	#9
SR240Z Zilvia Junkie Join Date: Apr 2004 Location: California Posts: 473 Trader Rating: (10) Feedback Score: 10 reviews	This is strictly a for sale thread for the parts ive got available. Feel free to PM me if you have any other questions otherwise but lets keep this on topic about buying/selling parts. To answer your question anyway, i never made any video of the car running since it was never properly tuned on a dyno. __________________ 2004 IS300 Sportcross 1JZ

10-12-2009, 02:10 PM	#2
Driftastic Leaky Injector Join Date: Jun 2009 Location: cabot, ar Age: 39 Posts: 135 Trader Rating: (1) Feedback Score: 1 reviews	sick ITB setup. I used to have a 20V AE86 and i loved the sound and response. However those stacks look rather long, does it actually fit in between the strut towers? you got a pic of when the motor was installed?

10-12-2009, 05:43 PM	#6
WV350Z Leaky Injector Join Date: Sep 2007 Location: Charleston West Virginia Age: 38 Posts: 103 Trader Rating: (0) Feedback Score: 0 reviews	what did you do part the car out???if so you wanna sell the shell??

10-14-2009, 11:00 PM	#10
tschad Zilvia Junkie Join Date: Dec 2007 Location: yorba linda Age: 35 Posts: 331 Trader Rating: (6) Feedback Score: 6 reviews	i want to know how that sounds. =]

10-15-2009, 02:07 AM	#11
azndummie Zilvia FREAK! Join Date: Dec 2005 Location: orange county Posts: 1,362 Trader Rating: (14) Feedback Score: 14 reviews	in the second portion of this for sale, you are selling just a built ka head and headgasket, or complete motor? __________________

10-15-2009, 08:42 AM	#12
SR240Z Zilvia Junkie Join Date: Apr 2004 Location: California Posts: 473 Trader Rating: (10) Feedback Score: 10 reviews	The bottom end of the motor is not available for sale at the moment. It is just for the built KA head with the throttle body setup. The motor sounded very lopey with the cams and throttle bodies but sounded insane under throttle! Wish it would have been fully tuned to have made a video but there is no chance of that now so we need to part ways with the KA. __________________ 2004 IS300 Sportcross 1JZ

10-15-2009, 10:19 AM	#13
Driftastic Leaky Injector Join Date: Jun 2009 Location: cabot, ar Age: 39 Posts: 135 Trader Rating: (1) Feedback Score: 1 reviews	doesnt look like there would be enough room for some sock filters. I would love to have this but those runners are just too long. I couldnt run it without some sock filters. If you would be interested in making a set with shorter runners PM me.

10-15-2009, 04:28 PM	#14
SR240Z Zilvia Junkie Join Date: Apr 2004 Location: California Posts: 473 Trader Rating: (10) Feedback Score: 10 reviews	All you have to do is cut the runners because they are mild steel. Any exhaust shop can make you runners in the length and taper that you want with their pipe expander as well. __________________ 2004 IS300 Sportcross 1JZ

10-15-2009, 05:05 PM	#15
240sxskyline Join Date: Sep 2009 Location: pasco Age: 36 Posts: 5 Trader Rating: (0) Feedback Score: 0 reviews	so are you selling theis bad boy?

10-15-2009, 07:13 PM	#16
SR240Z Zilvia Junkie Join Date: Apr 2004 Location: California Posts: 473 Trader Rating: (10) Feedback Score: 10 reviews	I'm not selling the shell, just the parts listed for sale in this ad. __________________ 2004 IS300 Sportcross 1JZ

10-20-2009, 12:28 AM	#17
SR240Z Zilvia Junkie Join Date: Apr 2004 Location: California Posts: 473 Trader Rating: (10) Feedback Score: 10 reviews	Clutch/Flywheel assembly sold. Everything else still available!!! Lets get some offers people __________________ 2004 IS300 Sportcross 1JZ

10-21-2009, 08:07 PM	#19
bardabe Post Whore! Join Date: Aug 2005 Location: SoCal Age: 34 Posts: 4,719 Trader Rating: (10) Rides Gallery: bardabe Feedback Score: 10 reviews	PM Sent tranny is mine. __________________ Review Thread

10-24-2009, 10:16 AM	#20
SR240Z Zilvia Junkie Join Date: Apr 2004 Location: California Posts: 473 Trader Rating: (10) Feedback Score: 10 reviews	Everything is still available! Best reasonable offers get whatever is available. I am not taking the cams off the head so please dont PM and ask me for that. __________________ 2004 IS300 Sportcross 1JZ

10-25-2009, 11:10 PM	#21
97KoukiFTW Zilvia Member Join Date: Mar 2009 Location: San Diego, CA Age: 38 Posts: 273 Trader Rating: (2) Feedback Score: 2 reviews	Lol well wish my transmission wasn't f'd up so I could come pick yours up lol. .

10-28-2009, 11:06 AM	#23
SR240Z Zilvia Junkie Join Date: Apr 2004 Location: California Posts: 473 Trader Rating: (10) Feedback Score: 10 reviews	Trans sold!! The rest of the parts are still available. I also have the start and the alternator. __________________ 2004 IS300 Sportcross 1JZ

10-30-2009, 03:07 AM	#24
foreverdark Nissanaholic! Join Date: Jun 2007 Location: Redondo Beach,CA Age: 39 Posts: 2,440 Trader Rating: (13) Feedback Score: 13 reviews	still have the block? interested. __________________

10-30-2009, 03:36 AM	#25
Geezy Zilvia Junkie Join Date: Jul 2009 Location: Las Vegas Posts: 301 Trader Rating: (5) Feedback Score: 5 reviews	damn son what would it take for you to make another ITB set up like that and sell it to me? just inquiring...

10-30-2009, 08:54 AM	#26
SR240Z Zilvia Junkie Join Date: Apr 2004 Location: California Posts: 473 Trader Rating: (10) Feedback Score: 10 reviews	The block alone is available. Ill have to talk to my dad to see when it is ready so just PM me with your number so i can give you a call. Why would we make another ITB setup and sell when this one is already done and ready to sell?? Buy this one and just cut the stacks a little shorter. __________________ 2004 IS300 Sportcross 1JZ

03-19-2010, 11:38 PM	#27
SR240Z Zilvia Junkie Join Date: Apr 2004 Location: California Posts: 473 Trader Rating: (10) Feedback Score: 10 reviews	Sold the head/valve cover package. The ITB setup is still available and so is the short block (needs new rings) which has factory Nissan oil pump, new water pump, SOHC pistons, and the alternator. Best offer on these items get it! __________________ 2004 IS300 Sportcross 1JZ

11-02-2014, 02:57 AM	#28
_readthis Join Date: Jul 2014 Location: Hawaii Posts: 1 Trader Rating: (0) Feedback Score: 0 reviews	How much are you asking for the itb setup?

11-02-2014, 06:05 AM	#29
jppierre Zilvia Member Join Date: Jul 2012 Location: El Paso TX Age: 33 Posts: 172 Trader Rating: (4) Feedback Score: 4 reviews	bruh.. this thing been dead for more than 4 years