RB25det Clutch Fan - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

JacksonBrown · 07-04-2009, 02:46 PM

already acquired one! Thanks for everyone's posts,etc -- thanks especially to efrain for the hookup!!

efrain_n7 · 07-04-2009, 06:03 PM

I got one for you, hit me up Monday, Four Eight Zero 295 1787

JacksonBrown · 07-05-2009, 11:55 PM

Efrain,

That's coo -- I'll holleratchatomorra. Btw, do you have both the fan and the clutch? If so, how many blades is the fan? Domo domo.

EDIT: Do you also have an S14 condenser fan? ; )

efrain_n7 · 07-06-2009, 12:08 AM

I'll have to count the blades tomorrow when i get to the shop. Its both the fan and clutch.

Sorry don't have a condensor fan.

JacksonBrown · 07-06-2009, 12:29 AM

Werd, all good.

Maybe you can answer this question dilemma. I have a '95 S14 w/ a S14sr. The car has functional a/c as well. Currently, I have a Taurus fan but it's set on high for the summer but is drawing too much amps and is going through relays. So, I'm ditching that setup. I have an S14sr shroud on the way, will get the rb25 clutch and fan from you, but need a condenser fan. Do you know if a stock KA condenser fan will fit, or do I need a JDM S14sr condenser fan due to fitment issue?

Thanks in advance!

efrain_n7 · 07-06-2009, 12:44 AM

Quote:

Originally Posted by JacksonBrown

Werd, all good.

Maybe you can answer this question dilemma. I have a '95 S14 w/ a S14sr. The car has functional a/c as well. Currently, I have a Taurus fan but it's set on high for the summer but is drawing too much amps and is going through relays. So, I'm ditching that setup. I have an S14sr shroud on the way, will get the rb25 clutch and fan from you, but need a condenser fan. Do you know if a stock KA condenser fan will fit, or do I need a JDM S14sr condenser fan due to fitment issue?

Thanks in advance!

Why not just run a sr clutch fan and shroud? A properly working clutch fan and shroud will work better than most electrics here in Gay-Z. Only draw back is the dryer might be in the way. The s13 has it in the way so you either have to move it or cut up the shroud.

And yes the ka condensor fan will work on your new setup.

JacksonBrown · 07-06-2009, 11:15 AM

Just called you but it went immediately to voice mail. Please call me:

Four Eight Zero Six 35-8888

Thanks!

Mark Slide Squad · 07-11-2009, 07:24 PM

I have an RB25DET clutch fan assy, $40 shipped.

JacksonBrown · 07-11-2009, 11:33 PM

Thanks for your reply.

Efrain hooked me up earlier this week (thanks again homie!)

I wish there was a way to lock threads on your own on this board...

07-04-2009, 02:46 PM	#1
JacksonBrown Zilvia Member Join Date: Aug 2007 Location: recliner of rage Posts: 226 Trader Rating: (0) Feedback Score: 0 reviews	RB25det Clutch Fan already acquired one! Thanks for everyone's posts,etc -- thanks especially to efrain for the hookup!! Last edited by JacksonBrown; 07-11-2009 at 11:34 PM..

07-04-2009, 06:03 PM	#2
efrain_n7 Zilvia Addict Join Date: May 2007 Location: Irvine Age: 42 Posts: 816 Trader Rating: (99) Feedback Score: 99 reviews	I got one for you, hit me up Monday, Four Eight Zero 295 1787

07-05-2009, 11:55 PM	#3
JacksonBrown Zilvia Member Join Date: Aug 2007 Location: recliner of rage Posts: 226 Trader Rating: (0) Feedback Score: 0 reviews	Efrain, That's coo -- I'll holleratchatomorra. Btw, do you have both the fan and the clutch? If so, how many blades is the fan? Domo domo. EDIT: Do you also have an S14 condenser fan? ; )

07-06-2009, 12:08 AM	#4
efrain_n7 Zilvia Addict Join Date: May 2007 Location: Irvine Age: 42 Posts: 816 Trader Rating: (99) Feedback Score: 99 reviews	I'll have to count the blades tomorrow when i get to the shop. Its both the fan and clutch. Sorry don't have a condensor fan.

07-06-2009, 12:29 AM	#5
JacksonBrown Zilvia Member Join Date: Aug 2007 Location: recliner of rage Posts: 226 Trader Rating: (0) Feedback Score: 0 reviews	Werd, all good. Maybe you can answer this question dilemma. I have a '95 S14 w/ a S14sr. The car has functional a/c as well. Currently, I have a Taurus fan but it's set on high for the summer but is drawing too much amps and is going through relays. So, I'm ditching that setup. I have an S14sr shroud on the way, will get the rb25 clutch and fan from you, but need a condenser fan. Do you know if a stock KA condenser fan will fit, or do I need a JDM S14sr condenser fan due to fitment issue? Thanks in advance!

07-06-2009, 11:15 AM	#7
JacksonBrown Zilvia Member Join Date: Aug 2007 Location: recliner of rage Posts: 226 Trader Rating: (0) Feedback Score: 0 reviews	Just called you but it went immediately to voice mail. Please call me: Four Eight Zero Six 35-8888 Thanks!

07-11-2009, 07:24 PM	#8
Mark Slide Squad Zilvia Junkie Join Date: Jan 2002 Posts: 511 Trader Rating: (16) Feedback Score: 16 reviews	I have an RB25DET clutch fan assy, $40 shipped.

07-11-2009, 11:33 PM	#9
JacksonBrown Zilvia Member Join Date: Aug 2007 Location: recliner of rage Posts: 226 Trader Rating: (0) Feedback Score: 0 reviews	Thanks for your reply. Efrain hooked me up earlier this week (thanks again homie!) I wish there was a way to lock threads on your own on this board...