Maximum TIRE(Rubber) fitment thread

[jr_ss]

If you want the most tire in the rear for an S14, stick with high 20's to mid 30's on your offset with a 10" wheel. High teens and low 20's are what you need for a 9" upfront.

[jr_ss]

If you want the most tire in the rear for an S14, stick with high 20's to mid 30's on your offset with a 10" wheel. High teens and low 20's are what you need for a 9" upfront.

[cmercer89]

So let me give you an example of what I want. If I get 17x9.5 +30 with 275/40 rear and 17×9 +22 255/40 front, I would only have to do minor pulling? Also I have 95, stance coilovers, already rolled fenders and quarters

Sent from my SM-G920V using Tapatalk

[silviaks2nr]

Should be good

[cmercer89]

I should have any sunkage in the rear right?

Sent from my SM-G920V using Tapatalk

[FMFsx]

Hey quick question I just bought z rims and the tears are wrapped in a 245/40/18 they seem to run while cornering.. I don't know what size to buy for the fronts/rear I'm looking for a usuaable combo some drift some grip taht will not rub.. The rims are 18x8.0

[jingledingle]

Curious if anyone has some suggestions on what I should run on my 180sx. I will be running 50mm front fenders and 70mm rear fenders in the near future and currently own a pair of 18x9j +12 and 19x9.5j +05.

[Black R]

Just a ballpark:

Rear 18x12.5 and 335+

Somewhere in the +7 offset range.

Front will work with 11.5" wide and -5 offset.

[Itsuki Takeuchi]

Appliance Wire Mag Wheels Made in Japan in the 70's
Found them deep in craigslist for $100.

15x8 -38 offset

rear tires are 195/55
fronts 185/50

Not currently maxed out on coilovers. the rears rub pretty bad. ive rolled as much as possible. Most likly going over fenders vs adding camber to fit.


[IMG][/IMG]

[koukimonst3r]

Anyone here have koguchi front and rear fenders? I was wondering how it would fit with 18x10j 0 wrapped on 265/35 and 18x11j -7 wrapped on 285/30

[Bluejayde]

Originally Posted by Itsuki Takeuchi

the rears rub pretty bad. ive rolled as much as possible. Most likly going over fenders vs adding camber to fit.

Why not get tires that fit better?

Edit: -38? You need wheels that fit better.

[Itsuki Takeuchi]

Originally Posted by Bluejayde

Why not get tires that fit better?

Edit: -38? You need wheels that fit better.

yea if only they still made these wheels. and in different offsets

i could go with a smaller tire but will still rub. i would like to lower it back down without adding camber. which i can do, but need over fenders.

[ka-titties]

maybe sell the wheels for profit and get something that actually fits?

what a concept...

edit:

they're ugly as piss anyways.

[Itsuki Takeuchi]

Originally Posted by ka-titties

maybe sell the wheels for profit and get something that actually fits?

what a concept...

edit:

they're ugly as piss anyways.

They fit amazingly except for the rear. and you act like im the only one needing to modify my rear fenders to fit better. many have pulled,rolled. and or fender flares(bolt on or molded). even over fenders. i can make the fit fine with negative camber. but not interested in doing that. thats for fanbois and honda fags now lol

I could sell the wheels for a profit. Offered $800 when i first bought them. But these are rare wheels. I put alot work in cleaning them and getting the curb rash out. Not going to sacrifice them because of you and only your opinion. Everyone has different tastes. And my taste is original/old school. Not jumping on the bandwagon. Not a Fanboi that has to have super donk 2 piece wheels to have a fat lip.




just giving out negative comments on someones hard work is just being a....

there are many schassis i dont agree with on here. but i dont leave rude comments to make myself be heard or feel good.

we have the same passion. Schassis. dont be a

[ka-titties]

Just telling it like it is man.

Good luck.

[LoSt180]

Originally Posted by ka-titties

This is mine that I posted a few pages back. RPF1 17x9 +22. 255/40R17 Continental Contisport. F/R roll and pull about 1.5". ~-1 deg camber all around.

Pic doesn't work, but is this on an S13 or S14? I have a 97 Kouki and am leaning most towards RPF1 17x9 +22 with 245/40R17 tires all around. I don't mind rolling fenders to prevent rubbing, but I can't stand for wheels to stick out past the sides. Car is breaking loose the stock 205 tires so need to get some more meat back there.

Just trying to find more pictures of that size & offset that don't use spacers, etc. Car is stock height right now, haven't decided on coilovers or springs just yet, goal is a fun street car - not a stance or a track missile.

[LuckyX2]

Originally Posted by HIV+

Anyone here have koguchi front and rear fenders? I was wondering how it would fit with 18x10j 0 wrapped on 265/35 and 18x11j -7 wrapped on 285/30

You can fit that fine. I'll be running 18x11 +20 315/30 front and 18x11 +20 335/30 rear.

[silviaks2nr]

Originally Posted by Itsuki Takeuchi

They fit amazingly except for the rear. and you act like im the only one needing to modify my rear fenders to fit better. many have pulled,rolled. and or fender flares(bolt on or molded). even over fenders. i can make the fit fine with negative camber. but not interested in doing that. thats for fanbois and honda fags now lol

I could sell the wheels for a profit. Offered $800 when i first bought them. But these are rare wheels. I put alot work in cleaning them and getting the curb rash out. Not going to sacrifice them because of you and only your opinion. Everyone has different tastes. And my taste is original/old school. Not jumping on the bandwagon. Not a Fanboi that has to have super donk 2 piece wheels to have a fat lip.




just giving out negative comments on someones hard work is just being a....

there are many schassis i dont agree with on here. but i dont leave rude comments to make myself be heard or feel good.

we have the same passion. Schassis. dont be a

Get out of here with your retarded fitting, old, beat up wheels. This thread is for people with mature taste...

[Itsuki Takeuchi]

Originally Posted by silviaks2nr

Get out of here with your retarded fitting, old, beat up wheels. This thread is for people with mature taste...

MATURE

[ka-titties]

Originally Posted by LoSt180

Pic doesn't work, but is this on an S13 or S14? I have a 97 Kouki and am leaning most towards RPF1 17x9 +22 with 245/40R17 tires all around. I don't mind rolling fenders to prevent rubbing, but I can't stand for wheels to stick out past the sides. Car is breaking loose the stock 205 tires so need to get some more meat back there.

Just trying to find more pictures of that size & offset that don't use spacers, etc. Car is stock height right now, haven't decided on coilovers or springs just yet, goal is a fun street car - not a stance or a track missile.

S13 coupe.

[SoundEfx]

Originally Posted by LoSt180

Pic doesn't work, but is this on an S13 or S14? I have a 97 Kouki and am leaning most towards RPF1 17x9 +22 with 245/40R17 tires all around. I don't mind rolling fenders to prevent rubbing, but I can't stand for wheels to stick out past the sides. Car is breaking loose the stock 205 tires so need to get some more meat back there.

Just trying to find more pictures of that size & offset that don't use spacers, etc. Car is stock height right now, haven't decided on coilovers or springs just yet, goal is a fun street car - not a stance or a track missile.

I am looking for similar information. My initial measuring gives me a 17x8 +27 front and 17x9 + 25 rear 'proper' fitment but every picture I'm seen doesn't state whether spacers were used or not.

Originally Posted by ka-titties

S13 coupe.

Or it's for a S13.

[Black R]

Originally Posted by LuckyX2

You can fit that fine. I'll be running 18x11 +20 315/30 front and 18x11 +20 335/30 rear.

What are you doing up front for the 18x11's?

Longer LCA's and relocating upper mounts?

[Kenspec]

volk ZE40 18 x 11 + 15 offset all around. 315 Toyo R888 all around... they seem to be really a 320 width tire lol.

[c.f.169]

Hey guys, I'm sure you've heard this a thousand times, but I've searched! What I'm hoping to find out is if my new tires will fit. Currently on my s14 I have 17x10 +25 with rolled fenders, running a 235-40-17. The new tires in question are 245-40-17. Thanks in advanced and I apologize if this is in the wrong area.

Thanks!

[CornSpeed]

Originally Posted by c.f.169

Hey guys, I'm sure you've heard this a thousand times, but I've searched! What I'm hoping to find out is if my new tires will fit. Currently on my s14 I have 17x10 +25 with rolled fenders, running a 235-40-17. The new tires in question are 245-40-17. Thanks in advanced and I apologize if this is in the wrong area.

Thanks!

Definitely in the wrong area. Try the wheel fitment whore thread. On a 17x10, you should definitely be running a 275/40r17 at least.

[silviaks2nr]

295/35/17 is a good size for a 17x10, do that.

[c.f.169]

Originally Posted by silviaks2nr

295/35/17 is a good size for a 17x10, do that.

On a +25 wheels!? That would look terrible! The goal is to have it not come past the rear fender, but to still clear the arch.

[[240sx]]

Originally Posted by c.f.169

..That would LOOK terrible!..

There's your problem...

[silviaks2nr]

295 clears rear fenders with a +30 offset on s14 with just a slight pull. 5mm is not a big difference.

[c.f.169]

Originally Posted by [240sx]

There's your problem...

I can appreciate your opinion, however I think you've mistaken what I mean by looks terrible. What I was trying to get accross was, I don't want it to stick past the 1/4 panel arch.