Keeping 240sx pop-up headlights with the Part Shop Max Intercooler Kit - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

The_Lorax · 10-01-2011, 03:48 PM

http://youtu.be/C6dgPk5m13A

This was done by cutting the factory pop up headlight arm in half and fitting a length of steel tube over the top.

Next we put two 90 degree bends in the tube and made a bracket that turned the motor sideways, bolting it through two factory holes on the chassis rail.

The headlight motor cover will be welded to the bracket soon and I will do a full writeup of the modification. Do you guys want a scale drawing of the brackets we made?

Driven08 · 10-01-2011, 03:59 PM

Looks good. I always wanted their kit but didn't want my lights up 24/7. Will you be selling that linkage?

Edwin562 · 10-01-2011, 04:04 PM

Creative.... nice work.

cjmirabal1 · 10-01-2011, 04:20 PM

nice! i was always wondering a way to retain the flip ups....but im going s13.5 now so a lil to late but still awsome to finally have an answer

The_Lorax · 10-02-2011, 02:03 AM

Quick question for you US guys -

Is your front bumper iron bigger than the JDM Kouki bumper support? Trying to figure out if my headlight mod will clear the USDM front bumper.

Could someone please post a photo of their front end?

Krusty_s13 · 10-02-2011, 08:32 AM

i would be interested in a kit if you plan on making one.
i plan on using a PSM kit with pop ups also.

*fliprayzin240sx* · 10-02-2011, 09:51 AM

Quote:

Originally Posted by The_Lorax

Quick question for you US guys -

Is your front bumper iron bigger than the JDM Kouki bumper support? Trying to figure out if my headlight mod will clear the USDM front bumper.

Could someone please post a photo of their front end?

Yes, USDM bumper support are all bigger than their JDM counterpart. Most will hack/trim the support to fit JDM bumpers.

harrypotter · 10-02-2011, 10:13 AM

This gets rid if the only problem I have with buying the pbm ic.

Would be interested in buying the arms/kit or getting the scale drawing.

The_Lorax · 10-02-2011, 11:00 PM

can someone please upload a photo of the USDM bumper iron on the car?

Is it normal / standard practice for people to trim it when fitting bodykits etc? The headlight motor just touches the JDM bumper support where I have it sitting, but there is no where else to put it.

harrypotter · 10-04-2011, 06:38 PM

1990 s13

The right side

dopplganger1 · 10-13-2011, 12:28 AM

any more updates on this?

The_Lorax · 10-13-2011, 02:33 AM

No updates yet because my garage leaked and shorted out the garage lighting. We will have some news soon, once we refine the prototype on my car

cjmirabal1 · 12-16-2011, 12:04 PM

Any progress on this kit or drawing?

Infamax · 06-19-2012, 11:18 PM

Has anyone made any for sell yet?

10-01-2011, 03:48 PM	#1
The_Lorax Join Date: Aug 2010 Location: New Zealand Age: 38 Posts: 9 Trader Rating: (0) Feedback Score: 0 reviews	Keeping 240sx pop-up headlights with the Part Shop Max Intercooler Kit http://youtu.be/C6dgPk5m13A This was done by cutting the factory pop up headlight arm in half and fitting a length of steel tube over the top. Next we put two 90 degree bends in the tube and made a bracket that turned the motor sideways, bolting it through two factory holes on the chassis rail. The headlight motor cover will be welded to the bracket soon and I will do a full writeup of the modification. Do you guys want a scale drawing of the brackets we made?

10-02-2011, 10:13 AM	#8
harrypotter Zilvia Addict Join Date: Jun 2010 Location: Panama City FL Posts: 622 Trader Rating: (19) Feedback Score: 19 reviews	This gets rid if the only problem I have with buying the pbm ic. Would be interested in buying the arms/kit or getting the scale drawing. __________________

10-04-2011, 06:38 PM	#10
harrypotter Zilvia Addict Join Date: Jun 2010 Location: Panama City FL Posts: 622 Trader Rating: (19) Feedback Score: 19 reviews	1990 s13 The right side __________________

10-01-2011, 03:59 PM	#2
Driven08 Post Whore! Join Date: Jul 2005 Location: Riverside, SoCal Posts: 4,810 Trader Rating: (354) Feedback Score: 354 reviews	Looks good. I always wanted their kit but didn't want my lights up 24/7. Will you be selling that linkage?

10-01-2011, 04:04 PM	#3
Edwin562 Post Whore! Join Date: Nov 2009 Location: Whittier (562) Age: 34 Posts: 4,721 Trader Rating: (35) Feedback Score: 35 reviews	Creative.... nice work.

10-01-2011, 04:20 PM	#4
cjmirabal1 Zilvia Member Join Date: Aug 2010 Location: Tampa Age: 35 Posts: 155 Trader Rating: (2) Feedback Score: 2 reviews	nice! i was always wondering a way to retain the flip ups....but im going s13.5 now so a lil to late but still awsome to finally have an answer

10-02-2011, 02:03 AM	#5
The_Lorax Join Date: Aug 2010 Location: New Zealand Age: 38 Posts: 9 Trader Rating: (0) Feedback Score: 0 reviews	Quick question for you US guys - Is your front bumper iron bigger than the JDM Kouki bumper support? Trying to figure out if my headlight mod will clear the USDM front bumper. Could someone please post a photo of their front end?

10-02-2011, 08:32 AM	#6
Krusty_s13 Zilvia Addict Join Date: May 2008 Location: Miami, FL Posts: 879 Trader Rating: (0) Feedback Score: 0 reviews	i would be interested in a kit if you plan on making one. i plan on using a PSM kit with pop ups also.

10-02-2011, 11:00 PM	#9
The_Lorax Join Date: Aug 2010 Location: New Zealand Age: 38 Posts: 9 Trader Rating: (0) Feedback Score: 0 reviews	can someone please upload a photo of the USDM bumper iron on the car? Is it normal / standard practice for people to trim it when fitting bodykits etc? The headlight motor just touches the JDM bumper support where I have it sitting, but there is no where else to put it.

10-13-2011, 12:28 AM	#11
dopplganger1 Zilvia Member Join Date: Jan 2008 Location: portland Posts: 235 Trader Rating: (1) Feedback Score: 1 reviews	any more updates on this?

10-13-2011, 02:33 AM	#12
The_Lorax Join Date: Aug 2010 Location: New Zealand Age: 38 Posts: 9 Trader Rating: (0) Feedback Score: 0 reviews	No updates yet because my garage leaked and shorted out the garage lighting. We will have some news soon, once we refine the prototype on my car

12-16-2011, 12:04 PM	#13
cjmirabal1 Zilvia Member Join Date: Aug 2010 Location: Tampa Age: 35 Posts: 155 Trader Rating: (2) Feedback Score: 2 reviews	Any progress on this kit or drawing?

06-19-2012, 11:18 PM	#14
Infamax Zilvia Member Join Date: Apr 2005 Location: Yuba City (Nor Cal) Age: 37 Posts: 223 Trader Rating: (7) Feedback Score: 7 reviews	Has anyone made any for sell yet?