Ls swapped s14 carbon fiber hood - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

CrispKouki · 04-12-2020, 10:11 PM

So I recently finished the ls swap on my s14 kouki and my TA style carbon seibon hood won?t fit over throttle body. Anyone know what vented carbon fiber hood will fit over ls?

Sent from my iPhone using Tapatalk

Silv1401 · 04-13-2020, 10:08 AM

I would look into some drop-down engine mounts first. They'd be cheaper than a new carbon hood, and would also help lower the center of gravity.

Sent from my SM-G950U using Tapatalk

CrispKouki · 04-13-2020, 10:58 AM

Quote:

Originally Posted by Silv1401

I would look into some drop-down engine mounts first. They'd be cheaper than a new carbon hood, and would also help lower the center of gravity.

Sent from my SM-G950U using Tapatalk

Oil pan is already pretty low sadly

Sent from my iPhone using Tapatalk

Silv1401 · 04-13-2020, 11:06 AM

Don't they have some pretty low clearance-minded oil pans for the LS? Alternatively, most dry sumps are pretty short as well. I know there's a moroso one that is real squat, and not too expensive. Those are just my thoughts, I would try to make the carbon work and spend the money on upgrading the oil pan and lowering the weight, then it'd be a win-win situation.

Sent from my SM-G950U using Tapatalk

afishysilvia · 04-13-2020, 12:01 PM

You should post photos and specs if you want real help. This all varies so much off mount kit, type of intake, size of TB.

I know I told you to space the hood up in the back. Does that not work?

SupaDoopa · 04-13-2020, 02:13 PM

What mount kit and what intake manifold/throttle body are you using? Maybe let's start with the basics - including pictures - so we can actually help.

CrispKouki · 04-13-2020, 05:05 PM

Only thing touching the hood is the throttle body and the throttle cable. Only need 2 inches to close the hood but this is with the hood raised in the back and my hood pins also raised.

Sent from my iPhone using Tapatalk

CrispKouki · 04-13-2020, 05:06 PM

Also it?s isr mounts and a canton oil pan

Sent from my iPhone using Tapatalk

CrispKouki · 04-13-2020, 05:36 PM

Also, I know stock carbon fiber hoods do fit without cutting so I guess I?m looking for a carbon fiber vented hood that doesn?t dip down?

Sent from my iPhone using Tapatalk

Kingtal0n · 04-14-2020, 10:18 AM

wow i have sikky mounts and the stock hood fits with a mile of room

afishysilvia · 04-14-2020, 10:39 AM

+1 for Sikky, fits no issues

SupaDoopa · 04-14-2020, 12:38 PM

ISR's are tall and don't drop the engine at all. If anything, you're doing yourself a disservice by raising that chunk of weight in the front even higher than it needs to be.

Your options:
1. Cut the hood
2. Run no hood
3. Get new mounts

CrispKouki · 04-14-2020, 03:21 PM

Yeah I have a stock factory hood and it fits with no issues, I?m just trying to have a vented hood for cooling purposes. Maybe the dmax hood will fit because the vents go up?

Sent from my iPhone using Tapatalk

SupaDoopa · 04-15-2020, 06:12 AM

Maybe test fit before you buy. See who has shit local - especially Texas being filled with S-chassis - and ask to bolt it on fast to see how fitment is.

04-12-2020, 10:11 PM	#1
CrispKouki Leaky Injector Join Date: Mar 2018 Location: Texas Age: 27 Posts: 98 Trader Rating: (1) Feedback Score: 1 reviews	Ls swapped s14 carbon fiber hood So I recently finished the ls swap on my s14 kouki and my TA style carbon seibon hood won?t fit over throttle body. Anyone know what vented carbon fiber hood will fit over ls? Sent from my iPhone using Tapatalk

04-13-2020, 12:01 PM	#5
afishysilvia Post Whore! Join Date: Jan 2010 Location: Cali Posts: 3,409 Trader Rating: (31) Rides Gallery: afishysilvia Feedback Score: 31 reviews	You should post photos and specs if you want real help. This all varies so much off mount kit, type of intake, size of TB. I know I told you to space the hood up in the back. Does that not work? __________________ Dont be a pussy...Leave your name

04-14-2020, 10:39 AM	#11
afishysilvia Post Whore! Join Date: Jan 2010 Location: Cali Posts: 3,409 Trader Rating: (31) Rides Gallery: afishysilvia Feedback Score: 31 reviews	+1 for Sikky, fits no issues __________________ Dont be a pussy...Leave your name

04-13-2020, 10:08 AM	#2
Silv1401 Zilvia Member Join Date: Jan 2019 Location: Vancouver, WA/Portland, OR, USA Posts: 189 Trader Rating: (1) Feedback Score: 1 reviews	I would look into some drop-down engine mounts first. They'd be cheaper than a new carbon hood, and would also help lower the center of gravity. Sent from my SM-G950U using Tapatalk

04-13-2020, 11:06 AM	#4
Silv1401 Zilvia Member Join Date: Jan 2019 Location: Vancouver, WA/Portland, OR, USA Posts: 189 Trader Rating: (1) Feedback Score: 1 reviews	Don't they have some pretty low clearance-minded oil pans for the LS? Alternatively, most dry sumps are pretty short as well. I know there's a moroso one that is real squat, and not too expensive. Those are just my thoughts, I would try to make the carbon work and spend the money on upgrading the oil pan and lowering the weight, then it'd be a win-win situation. Sent from my SM-G950U using Tapatalk

04-13-2020, 02:13 PM	#6
SupaDoopa Post Whore! Join Date: Jan 2010 Location: 隠された意図 Age: 36 Posts: 3,689 Trader Rating: (26) Feedback Score: 26 reviews	What mount kit and what intake manifold/throttle body are you using? Maybe let's start with the basics - including pictures - so we can actually help.

04-13-2020, 05:05 PM	#7
CrispKouki Leaky Injector Join Date: Mar 2018 Location: Texas Age: 27 Posts: 98 Trader Rating: (1) Feedback Score: 1 reviews	Only thing touching the hood is the throttle body and the throttle cable. Only need 2 inches to close the hood but this is with the hood raised in the back and my hood pins also raised. Sent from my iPhone using Tapatalk

04-13-2020, 05:06 PM	#8
CrispKouki Leaky Injector Join Date: Mar 2018 Location: Texas Age: 27 Posts: 98 Trader Rating: (1) Feedback Score: 1 reviews	Also it?s isr mounts and a canton oil pan Sent from my iPhone using Tapatalk

04-13-2020, 05:36 PM	#9
CrispKouki Leaky Injector Join Date: Mar 2018 Location: Texas Age: 27 Posts: 98 Trader Rating: (1) Feedback Score: 1 reviews	Also, I know stock carbon fiber hoods do fit without cutting so I guess I?m looking for a carbon fiber vented hood that doesn?t dip down? Sent from my iPhone using Tapatalk

04-14-2020, 10:18 AM	#10
Kingtal0n Post Whore! Join Date: Jul 2005 Location: South Florida Age: 41 Posts: 4,828 Trader Rating: (17) Feedback Score: 17 reviews	wow i have sikky mounts and the stock hood fits with a mile of room

04-14-2020, 12:38 PM	#12
SupaDoopa Post Whore! Join Date: Jan 2010 Location: 隠された意図 Age: 36 Posts: 3,689 Trader Rating: (26) Feedback Score: 26 reviews	ISR's are tall and don't drop the engine at all. If anything, you're doing yourself a disservice by raising that chunk of weight in the front even higher than it needs to be. Your options: 1. Cut the hood 2. Run no hood 3. Get new mounts

04-14-2020, 03:21 PM	#13
CrispKouki Leaky Injector Join Date: Mar 2018 Location: Texas Age: 27 Posts: 98 Trader Rating: (1) Feedback Score: 1 reviews	Yeah I have a stock factory hood and it fits with no issues, I?m just trying to have a vented hood for cooling purposes. Maybe the dmax hood will fit because the vents go up? Sent from my iPhone using Tapatalk

04-15-2020, 06:12 AM	#14
SupaDoopa Post Whore! Join Date: Jan 2010 Location: 隠された意図 Age: 36 Posts: 3,689 Trader Rating: (26) Feedback Score: 26 reviews	Maybe test fit before you buy. See who has shit local - especially Texas being filled with S-chassis - and ask to bolt it on fast to see how fitment is.