Turbo XS SR20det twin scroll manifold Review - Page 2 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

*fliprayzin240sx* · 10-16-2013, 12:36 PM

Quote:

Originally Posted by 240knockout

why 2 oxygen sensors?

also...which thermal sleeves are those?

Stock o2 sensor and his wideband o2 sensor for tuning.

silviaNC · 10-16-2013, 05:34 PM

Quote:

Originally Posted by AJZax

thx for the heads up on the valve cover clearance man!

I think I'll be running IWG .92 8374 EFR with full-race T4 twin scroll EFR IWG manifold.

This manifold setup looks sweet though! I may later upgrade to it on my daily with a 3071 twin scroll?

Help fuel economy right!? Gotta get them MPG in the grocery getter S14!

Np dude, I'm planning to daily this car as well. Gotta love the $35 full tank. No better option than build a s14 to go grocery shopping lol.

silviaNC · 10-16-2013, 05:37 PM

Quote:

Originally Posted by fliprayzin240sx

Stock o2 sensor and his wideband o2 sensor for tuning.

Correct sir! On side note wastegate failed withing 5 seconds. Not sure if it was defective but its stuck open. Removed spring and valve will get stuck and I had to tap it to get it.loose. removed, junked, used my tial mv-s=problem solved

Def · 10-26-2013, 12:45 PM

Can you post the dyno up?

I saw the thread blow up over on SXOC - some of those guys are a little unnecessarily cocky...

But you posted you made near 500 rwhp, so I'd love to see the graph. Also what boost and housing A/R are you running? This is giving me hope a GTX3071R will still work out for a reasonably responsive track setup.

LED Sandwich · 03-14-2014, 01:31 AM

Apologies for the delay on this was doing some more twin scroll reading and bumped into this old thread. The dyno is in this thread on sxoc. http://www.sxoc.com/vbb/showthread.p...-tra-kyoto-s13
Couple of pages from the end

Sr20Noob · 03-22-2015, 02:33 PM

This is for the blacktop sr20 engine correct?

bikerskater · 07-23-2015, 09:44 PM

Just wanted to post because people were doubting the fact of stock cams

Stock block,bottom end, head,cams, exhaust manifold
Freddy intake
1000cc bosh injectors @60psi base pressure
Walbro 400lph pump
Power fc djectro
E85
Arp headstuds
Cosworth hg
Tial 38mm vband external wastegate
Greddy 20g

At 22.4psi I made 470whp 417wtq

10-26-2013, 12:45 PM	#34
Def Post Whore! Join Date: Apr 2004 Location: Houston, TX Posts: 2,701 Trader Rating: (16) Feedback Score: 16 reviews	Can you post the dyno up? I saw the thread blow up over on SXOC - some of those guys are a little unnecessarily cocky... But you posted you made near 500 rwhp, so I'd love to see the graph. Also what boost and housing A/R are you running? This is giving me hope a GTX3071R will still work out for a reasonably responsive track setup. __________________ S13 Hatch - Goes around tracks quickly DEFSPORT

07-23-2015, 09:44 PM	#37
bikerskater Zilvia Member Join Date: Oct 2008 Location: Roseville,ca Age: 33 Posts: 256 Trader Rating: (4) Feedback Score: 4 reviews	Just wanted to post because people were doubting the fact of stock cams Stock block,bottom end, head,cams, exhaust manifold Freddy intake 1000cc bosh injectors @60psi base pressure Walbro 400lph pump Power fc djectro E85 Arp headstuds Cosworth hg Tial 38mm vband external wastegate Greddy 20g At 22.4psi I made 470whp 417wtq __________________

03-14-2014, 01:31 AM	#35
LED Sandwich Join Date: Oct 2013 Location: UK Age: 37 Posts: 9 Trader Rating: (0) Feedback Score: 0 reviews	Apologies for the delay on this was doing some more twin scroll reading and bumped into this old thread. The dyno is in this thread on sxoc. http://www.sxoc.com/vbb/showthread.p...-tra-kyoto-s13 Couple of pages from the end

03-22-2015, 02:33 PM	#36
Sr20Noob Join Date: Mar 2015 Location: Orlando Florida Age: 29 Posts: 1 Trader Rating: (0) Feedback Score: 0 reviews	This is for the blacktop sr20 engine correct?