Question about S14 Sr20det hose by Throttle Body - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Slidin240Wayz · 09-02-2006, 04:45 PM

Before I took the motor I just cut this hose. I know the air goes to the AICV area; one of the sensors in the middle of the intake manifold. I just don't have a picture of where it went to. I am guessing it went to the IC piping.

Is it necessary to connect it?

If so, where does it connect to?

Any other input about this?

Carlos

sean350z · 09-02-2006, 05:28 PM

it connects to the intake intercooler piping that goes to the throttle body...i've kept it and everything runs fine...haven't ran without it though.

*NemeGuero* · 09-02-2006, 05:31 PM

its the air inlet for the aicv bypass. it goes to a vac line before the TB

Slidin240Wayz · 09-02-2006, 05:48 PM

So I am guessing it is necessary. Thanks.

I asked because I wanted to run the IC piping between the frame and the Power brace arms (stock ones) because it does in fact fit, instead of running it through the battery tray.

Carlos

*NemeGuero* · 09-02-2006, 05:50 PM

you can. just put a nipple on the IC pipe and run a vac line to it.

09-02-2006, 04:45 PM	#1
Slidin240Wayz Post Whore! Join Date: Jan 2005 Location: Everywhere Age: 39 Posts: 5,427 Trader Rating: (9) Feedback Score: 9 reviews	Question about S14 Sr20det hose by Throttle Body Before I took the motor I just cut this hose. I know the air goes to the AICV area; one of the sensors in the middle of the intake manifold. I just don't have a picture of where it went to. I am guessing it went to the IC piping. Is it necessary to connect it? If so, where does it connect to? Any other input about this? Carlos __________________ Support Zilvia by purchasing a sticker!

09-02-2006, 05:28 PM	#2
sean350z Zilvia Addict Join Date: Nov 2005 Location: Downingtown, PA Posts: 890 Trader Rating: (5) Rides Gallery: sean350z Feedback Score: 5 reviews	it connects to the intake intercooler piping that goes to the throttle body...i've kept it and everything runs fine...haven't ran without it though. __________________

09-02-2006, 05:31 PM	#3
NemeGuero No more nissan. Join Date: Jan 2003 Location: RAIN, Washington. Age: 39 Posts: 8,132 Trader Rating: (10) Rides Gallery: NemeGuero Feedback Score: 10 reviews	its the air inlet for the aicv bypass. it goes to a vac line before the TB __________________

09-02-2006, 05:48 PM	#4
Slidin240Wayz Post Whore! Join Date: Jan 2005 Location: Everywhere Age: 39 Posts: 5,427 Trader Rating: (9) Feedback Score: 9 reviews	So I am guessing it is necessary. Thanks. I asked because I wanted to run the IC piping between the frame and the Power brace arms (stock ones) because it does in fact fit, instead of running it through the battery tray. Carlos __________________ Support Zilvia by purchasing a sticker!

09-02-2006, 05:50 PM	#5
NemeGuero No more nissan. Join Date: Jan 2003 Location: RAIN, Washington. Age: 39 Posts: 8,132 Trader Rating: (10) Rides Gallery: NemeGuero Feedback Score: 10 reviews	you can. just put a nipple on the IC pipe and run a vac line to it. __________________