Offset

[LanceS13]

Post informative offset links or quotes...
http://www.zilvia.net/forums/cgi-bin...m=2&topic=1471

http://www.tirerack.com/wheels/tech/offset.htm

(edit*)Courtesy Matt (mdsdm) from 240sx.org
</span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote </td></tr><tr><td id="QUOTE">
original wheel width = a (in inches)
original wheel offset = b (in mm)
new wheel width = c (in inches)
new wheel offset = d (in mm)
difference in clearance on the inside between original & new = f (in mm)
difference in amount the wheel sticks out bewtween original & new = g (in mm)

f = ((a*25.4)/2 + b)-((c*25.4)/2 + d)
g = ((a*25.4)/2 - b)-((c*25.4)/2 - d)

</td></tr></table><span id='postcolor'>

[S13Grl]

Here's more info:

-Offset is the distance from the front of the hub-mounting surface to the center of the wheel.
-Zero offset means that the hub mounting surface is even with the centerline of the wheel.
-Positive offset means that the hub mounting surface is toward the street-side of the wheel.
-Negative means the opposite. (towards the axles).

-------------------------------------------------
Edit: Never mind, I just read Lance's link.