|
|
|||||||
| For Sale Items Post items for sale here. ABSOLUTELY NO COMMERCIAL SALES. |
 |
|
|
Thread Tools | Display Modes |
01-10-2014, 11:39 AM
|
#1 |
|
Zilvia Member
 
|
Alberta FS: s14 SR20DET Apexi Power FC L & D Jetro's & stock ECU
Both maf and map based ECUs as well as a stock ECU. Please note these are all for S14 SR20DET Zenki models. (10/93-6/96) If you do not know what you have, there are different pinouts between Zenki and Kouki ECU plugs, check your ECU pinouts and compare to this pinout picture:
 Note: N1 is Zenki pinout. From left to right is 8-10-10-10 Note: N2 is Kouki pinout. From left to right is 8-7-8-9 Used Apexi Power FC D-Jetro S14 SR20DET Zenki Model standalone for sale. D-Jetro is for MAP based setup which deletes the MAF setup for smoother operation on and off throttle. For earlier S14 SR20DET (Zenki - 10/93-6/96) Has a map for Tomei M8270, 760cc injectors, JWT S3 cams up to 14 psi. Base map can be installed. Comes with: ECU Commander IAT sensor and wiring Map Sensor and wiring Instruction booklet S14 SR OEM Plenum, powdercoated in santex black with IAT sensor and vacuum line tapped at back of manifold already [see pics] for a clean setup, save you doing the hard work. This D-Jetro is now discontinued and cannot be bought new. $700 Includes plenum if wanted    Used Apexi Power FC L-Jetro S14 SR20DET Zenki Model standalone for sale. L-Jetro is for MAF based setup. Zenki model is the earlier S14 SR20DET (Zenki - 10/93-6/96) Has a map for GT2871, 550cc injectors, JWT S3 cams up to 15 psi. Base map can be installed. This does NOT come with a commander, hence the price. $400 obo   Stock S14 SR20DET ECU, for early model - Zenki. Works great. $200   If you have an iphone you can imessage me 1-403-four6four-nine5three7 Lowballers will be ignored. So as an active seller, if I dont reply you know whats up.
__________________
The thing is, it’s a gearbox, okay? It has one job to do! One job! Pull the lever… ‘Am I a pencil? Am I a cauliflower? Am I a nuclear power sta– I’m a gearbox! Oh, heavens, I’m gonna swap some cogs around!’ Jeremy Clarkson on Automatics Last edited by yabeet; 07-29-2014 at 11:05 AM.. Reason: Pinout picture UPDATED PRICES |
|
|
| Sponsored Links |
|
01-19-2014, 08:27 PM
|
#2 |
|
Zilvia Member
|
Bump. Msglngth
__________________
The thing is, it’s a gearbox, okay? It has one job to do! One job! Pull the lever… ‘Am I a pencil? Am I a cauliflower? Am I a nuclear power sta– I’m a gearbox! Oh, heavens, I’m gonna swap some cogs around!’ Jeremy Clarkson on Automatics |
|
|
|
|
02-08-2014, 07:36 PM
|
#3 |
|
Zilvia Member
|
To the top.
__________________
The thing is, it’s a gearbox, okay? It has one job to do! One job! Pull the lever… ‘Am I a pencil? Am I a cauliflower? Am I a nuclear power sta– I’m a gearbox! Oh, heavens, I’m gonna swap some cogs around!’ Jeremy Clarkson on Automatics |
|
|
|
|
07-29-2014, 11:05 AM
|
#4 |
|
Zilvia Member
|
Prices updated!
__________________
The thing is, it’s a gearbox, okay? It has one job to do! One job! Pull the lever… ‘Am I a pencil? Am I a cauliflower? Am I a nuclear power sta– I’m a gearbox! Oh, heavens, I’m gonna swap some cogs around!’ Jeremy Clarkson on Automatics |
|
|
|
|
| Bookmarks |
|
|
Linear Mode
