plz help ka24de wont start no spark - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

philjk2007 · 02-18-2011, 01:54 PM

ok so the other day after i had put on a headgasket a week ago i noticed my on on light was coming on so i decided to just change the oil pressure sensor now the car wont start i have no spark the car was working fine before i put the sensor ive change the coil resently along with the rotor, and cap the dizzy i good cause im getting fuel in all cylinders just no spark, i tested the coil , primary has 1.0 ohms and the secondary has 12.5 k ohms so its seems to in spec. could it be my ignitor chip plz help need asap

philjk2007 · 02-20-2011, 08:08 AM

no help thanks guys noone has any ideas

c-los13 · 02-20-2011, 10:05 AM

retrace your step
im sure nobody can see how change a oil sensor could mess everything up
maybe you pulled something else
good luck

k.man · 02-20-2011, 10:18 AM

check all your fuses, maybe your starter fuse went or somethign along those lines

spartanmisfit · 02-20-2011, 10:34 AM

is it cranking? Does it sputter or anything?

philjk2007 · 02-23-2011, 05:57 AM

cracks really strong but no spark

philjk2007 · 02-23-2011, 05:58 AM

no sputter no pops nothing

A.w/o.l. · 02-27-2011, 05:00 PM

dam im getting the same shit my guess was sumthin electrical so i pulled my body and engine harness to make sure theres no cuts and to my surprise there was mainly on the plugs that went to my dizzy

philjk2007 · 02-27-2011, 07:16 PM

found it i need a dizzy wft they cost so much

02-18-2011, 01:54 PM	#1
philjk2007 Join Date: Feb 2011 Location: great mills, maryland Age: 36 Posts: 8 Trader Rating: (0) Feedback Score: 0 reviews	plz help ka24de wont start no spark ok so the other day after i had put on a headgasket a week ago i noticed my on on light was coming on so i decided to just change the oil pressure sensor now the car wont start i have no spark the car was working fine before i put the sensor ive change the coil resently along with the rotor, and cap the dizzy i good cause im getting fuel in all cylinders just no spark, i tested the coil , primary has 1.0 ohms and the secondary has 12.5 k ohms so its seems to in spec. could it be my ignitor chip plz help need asap

02-20-2011, 08:08 AM	#2
philjk2007 Join Date: Feb 2011 Location: great mills, maryland Age: 36 Posts: 8 Trader Rating: (0) Feedback Score: 0 reviews	no help thanks guys noone has any ideas

02-20-2011, 10:05 AM	#3
c-los13 Zilvia Junkie Join Date: Feb 2010 Location: Edinburg, Texas Age: 35 Posts: 446 Trader Rating: (0) Feedback Score: 0 reviews	retrace your step im sure nobody can see how change a oil sensor could mess everything up maybe you pulled something else good luck

02-20-2011, 10:18 AM	#4
k.man Leaky Injector Join Date: Sep 2010 Location: whos askin Posts: 92 Trader Rating: (0) Feedback Score: 0 reviews	check all your fuses, maybe your starter fuse went or somethign along those lines

02-20-2011, 10:34 AM	#5
spartanmisfit Zilvia FREAK! Join Date: Jul 2008 Location: East Lansing, Michigan Posts: 1,332 Trader Rating: (18) Feedback Score: 18 reviews	is it cranking? Does it sputter or anything?

02-23-2011, 05:57 AM	#6
philjk2007 Join Date: Feb 2011 Location: great mills, maryland Age: 36 Posts: 8 Trader Rating: (0) Feedback Score: 0 reviews	cracks really strong but no spark

02-23-2011, 05:58 AM	#7
philjk2007 Join Date: Feb 2011 Location: great mills, maryland Age: 36 Posts: 8 Trader Rating: (0) Feedback Score: 0 reviews	no sputter no pops nothing

02-27-2011, 05:00 PM	#8
A.w/o.l. Join Date: May 2010 Location: houston Age: 34 Posts: 9 Trader Rating: (0) Feedback Score: 0 reviews	dam im getting the same shit my guess was sumthin electrical so i pulled my body and engine harness to make sure theres no cuts and to my surprise there was mainly on the plugs that went to my dizzy

02-27-2011, 07:16 PM	#9
philjk2007 Join Date: Feb 2011 Location: great mills, maryland Age: 36 Posts: 8 Trader Rating: (0) Feedback Score: 0 reviews	found it i need a dizzy wft they cost so much