Quote:
Originally Posted by Def
You can't use 861x series struts with the stock strut housing. Those require a gland nut up top, and I believe are too big of a diameter for the stock housing.
|
(I know this is an old ? but I wanted to clarify)
Actually, it's possible but far from ideal. I had to do that recently when we were in a time crunch to get on the track,and couldn't fab a whole set of housings in time. you only gain roughly 1/2" of bump travel over stock I believe, the tire clearance is far from great, and no off-the-shelf gland nuts are cut in a thread that will work with a stock housing i.d.- something needs to be made. However, if you're realy hurting for cash and can make some of your own parts, they will fit and work pretty well if you don't go too low.
Just thought I'd throw the info out there.
06-01-2010, 05:58 PM
Threaded Mode