VQ35DE swap faq - Page 2 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

irax · 07-03-2015, 01:58 AM

Quote:

Originally Posted by jorge1190

Is this possible in an S14 without cutting the firewall?

Absolutely

Quote:

Originally Posted by justin240s14

How do you get around chipped key with the ecu for the vq35 swap or does it not matter and use s14 ignition system?

There is software out there that can disable the NATS start up requirements.

justin240s14 · 07-03-2015, 11:02 AM

Do have any idea where to find a
2001 pathfinder 2wd ecu pinout?
Ive checked repair manuals on the nico site but ain't got nothing on it
Need one that looks like this one...

justin240s14 · 07-09-2015, 03:04 AM

Quote:

Originally Posted by turtle m3th

Just wondering if we can get a vq34de swap faq going since they're becoming more and more common, and there isn't a whole lot of resources pertaining to this swap.

here's a link to the mckinney mount kit
VQ-240sx swap Products McKinney Motorsports

some wiring info
http://zilvia.net/f/engine-tech/3890...ur-95-s14.html

and an awesome vq35 s13 build if you haven't seen it already
http://zilvia.net/f/chat/337935-350sx-nw-build-up.html
And IIRC 240sx ka24e p/s lines bolt right up to the vq35de!

A lot of good info in here, but too much bickering to sort through...
http://zilvia.net/f/chat/241510-yet-...st-thread.html

Let's keep it rolling guys! I'd love to have a nice collection of info for everyone to be able to reference.

Still need 2001 pathfinder 2wd automatic
Ecu harness and pinout with color and function of the wire's

justin240s14 · 07-12-2015, 10:34 AM

Found the 2001 pathfinder ecu harness but now need the pinout for it and wire color and function of wires!
Anyone ?

justin240s14 · 07-12-2015, 10:37 AM

Quote:

Originally Posted by justin240s14

Found the 2001 pathfinder ecu harness but now need the pinout for it and wire color and function of wires!
Anyone ?

Forgot the pic my bad

SlabUp · 07-16-2017, 10:33 PM

Anybody out here still that can help me out. Can't get my throttle body to function properly. Accelarator pedal has been tested good multiple times. Relay will not power on , have tried wiring it via this and the 350 schematic with no luck.

2006 vq35de rev up , cd009 , s14 240sx

On a side note it was functioning wired with no relay. I am trying to wire it properly with a relay.

SlabUp · 07-16-2017, 10:41 PM

I have pin 104 and pin 3 for the throttle relay wired in. What would I do with pins 4 and 5 then? Do they supply the relay power or do I just send constant 12v to them.
It's just getting frustrating reading so much info that I tend to mix up.

07-12-2015, 10:34 AM	#34
justin240s14 Join Date: Mar 2015 Location: Mississippi Age: 41 Posts: 29 Trader Rating: (0) Feedback Score: 0 reviews	ok what I found Found the 2001 pathfinder ecu harness but now need the pinout for it and wire color and function of wires! Anyone ?

07-16-2017, 10:33 PM	#36
SlabUp Join Date: Jul 2017 Location: Minnesota Age: 29 Posts: 7 Trader Rating: (0) Feedback Score: 0 reviews	Help a me Anybody out here still that can help me out. Can't get my throttle body to function properly. Accelarator pedal has been tested good multiple times. Relay will not power on , have tried wiring it via this and the 350 schematic with no luck. 2006 vq35de rev up , cd009 , s14 240sx On a side note it was functioning wired with no relay. I am trying to wire it properly with a relay.

07-16-2017, 10:41 PM	#37
SlabUp Join Date: Jul 2017 Location: Minnesota Age: 29 Posts: 7 Trader Rating: (0) Feedback Score: 0 reviews	I have pin 104 and pin 3 for the throttle relay wired in. What would I do with pins 4 and 5 then? Do they supply the relay power or do I just send constant 12v to them. It's just getting frustrating reading so much info that I tend to mix up.