|
Tech Talk Technical Discussion About The Nissan 240SX and Nissan Z Cars |
|
Thread Tools | Display Modes |
01-18-2012, 03:39 AM | #11 | |
Zilvia Junkie
Join Date: Mar 2010
Location: Goodyear AZ
Age: 38
Posts: 480
Trader Rating: (6)
Feedback Score: 6 reviews
|
Quote:
2 yes candy and metallics are hard to spray it takes skill and practice. When spraying metallics they tend to streak or blotch on the surface, to fix this go back over the areas but back your distance from the surface off a few inches more, it should look a bit lighter when your spraying it. When I spray candies I'll do a few coats at different angles on the car because candies will streak and look like crap when your spray clear so this helps make sure there are no streaks. 3 never heard of a prism clear 4 if you spray it with the clear I would do only one coat and then do two coats of normal clear over that. Most of the time you end up sanding and buffing and the last thing you want is metallics in your surface while polishing. Or you can spray it using a clear base coat and then spray clear over it Last edited by buentellomma; 01-18-2012 at 06:30 PM.. |
|
Bookmarks |
|
|