NC CHROME Weds Bazreia 18x10.5 +32 11.5 +16

[TINKSTER3]

Testing the waters with my babies.

I’ve had these wheels for a few years now and they’ve been though two rebuilds so far. I imported them from Japan back in 2015 and have been the only owner since. I’m ready to change up the look of my car, so throwing these up for grabs.

Weds Kranze Bazreia
5x114.3
18x10.5 +32 (ish)
18x11.5 +16 (ish)

Faces are OEM chrome plated and lips are 3.5” and 5” CHROME plated (not polished) from VRWheels.

Faces have a little chrome bubbling around lug holes, but not enough for me to care to have them refinished. One front Wheels has a minute bend but holds air and balances fine. Center caps have a red decal overlay which can be removed to show the OEM chrome cap. Zero curb rash on these wheels. One front wheel inner was cracked and one rear wheel inner has both been professionally repaired. Holds air and balances perfectly.

They clean easily with literally just a microfiber towel and a stream of water and you’ll instantly have the iciest wheels on the block.

225/35 Federal 595SS front
245/35 Federal 595RSR rear

Mainly looking to trade for 18s with less aggressive specs of similar value. I’d prefer monoblocks like TE37s, Work Emotions, Regas, etc. I’d even like cool stuff like Work Seekers, Meisters, Blitz, ya know....hotboi wheels.

Im going to start my price at $2200 shipped. Don’t want to let them go, but if your money/trade is right then they’re yours!

$2200 shipped
$2000 picked up in Greenville, NC 27834

Can submit more pictures uppon request!

Contact me at 2524145891

[jumpman2334]

free bump for a fellow IS owner. still trying to figure out how in the F you got that spec to fit in the front without it hitting the spindle.

[TINKSTER3]

Originally Posted by jumpman2334

free bump for a fellow IS owner. still trying to figure out how in the F you got that spec to fit in the front without it hitting the spindle.

Thanks man! It doesn’t work without a 10mm spacer bringing the offset to +22ish. There’s only like 10mm gal between the inner barrel and spindle using the spacer. I rebuilt the wheels knowing I’d have to use a spacer to clear my Supra brakes, but outer lip couldn’t be too large or else it wouldn’t sit flush with stock fender with JZX arms and camber maxed out. I hit the nail on the head with front fitment off a few measurements and pure luck lol.

[jumpman2334]

hot damn that's nuts. its crazy how much a jzx FUCA can help you stuff some wide wheels in the front on these cars. I also just noticed the snow, I drove mine in the snow not too long ago and it was interesting to say the least.

[TINKSTER3]

Back up for sale!