******URGENT!!!!!! s2 rb25det engine run then die and no start - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

smmsak · 12-27-2013, 10:30 AM

Hey guys ive got a question I had a timing issue and changed tensioner pulley and spring and retimed the car. She started right up and I let it run for a lil bit then took it for a cruise. I wasnt hitting boost yet and shifting about 2500 rpm just to give the car some time to get used to new things. I went about 3-4 miles, and heard a subtle pop noise. It ran for another few seconds then died. I pulled over and checked the timing belt amd stuff. All looks good. Everything under the hood looked good and no leaks under the car. Checked all plugs amd hoses everything is golden. I dunno what else it couldbe. I never had an issue like this before. Im stumped and need sime help bad!!! So please if anyone can help thank you very much. I have some random parts from rb/s14 that ill give away if I can get assistance. Please help help help

ultimateirving · 12-27-2013, 10:47 AM

Coupler popped off buddy

smmsak · 12-27-2013, 10:51 AM

Like intake coupler? All hoses couplers and stuff are good I pulled a spark plug out amd the plastic part cracked but only on one. Everything else is normal

smmsak · 12-27-2013, 10:56 AM

I found this but it was only on one plug. Could this be the issue??? It turns over. Sounds like it wamts to start theres compression just no boom.

ultimateirving · 12-27-2013, 12:49 PM

Yea that's a major problem. Spark plugs were over tightened. I would pull then a out and replace

12-27-2013, 10:30 AM	#1
smmsak Zilvia Junkie Join Date: Feb 2011 Location: Virginia Age: 35 Posts: 471 Trader Rating: (10) Feedback Score: 10 reviews	******URGENT!!!!!! s2 rb25det engine run then die and no start Hey guys ive got a question I had a timing issue and changed tensioner pulley and spring and retimed the car. She started right up and I let it run for a lil bit then took it for a cruise. I wasnt hitting boost yet and shifting about 2500 rpm just to give the car some time to get used to new things. I went about 3-4 miles, and heard a subtle pop noise. It ran for another few seconds then died. I pulled over and checked the timing belt amd stuff. All looks good. Everything under the hood looked good and no leaks under the car. Checked all plugs amd hoses everything is golden. I dunno what else it couldbe. I never had an issue like this before. Im stumped and need sime help bad!!! So please if anyone can help thank you very much. I have some random parts from rb/s14 that ill give away if I can get assistance. Please help help help

12-27-2013, 10:47 AM	#2
ultimateirving Zilvia FREAK! Join Date: Nov 2010 Location: arizona Age: 36 Posts: 1,521 Trader Rating: (1) Feedback Score: 1 reviews	Coupler popped off buddy __________________ Z32 with lq4 swap Desert Street Scene \|\| Dssevents.com

12-27-2013, 10:56 AM	#4
smmsak Zilvia Junkie Join Date: Feb 2011 Location: Virginia Age: 35 Posts: 471 Trader Rating: (10) Feedback Score: 10 reviews	I found this but it was only on one plug. Could this be the issue??? It turns over. Sounds like it wamts to start theres compression just no boom. Last edited by smmsak; 03-04-2014 at 07:07 PM..

12-27-2013, 12:49 PM	#5
ultimateirving Zilvia FREAK! Join Date: Nov 2010 Location: arizona Age: 36 Posts: 1,521 Trader Rating: (1) Feedback Score: 1 reviews	Yea that's a major problem. Spark plugs were over tightened. I would pull then a out and replace __________________ Z32 with lq4 swap Desert Street Scene \|\| Dssevents.com

12-27-2013, 10:51 AM	#3
smmsak Zilvia Junkie Join Date: Feb 2011 Location: Virginia Age: 35 Posts: 471 Trader Rating: (10) Feedback Score: 10 reviews	Like intake coupler? All hoses couplers and stuff are good I pulled a spark plug out amd the plastic part cracked but only on one. Everything else is normal