|
|
Thread Tools | Display Modes |
10-27-2013, 08:11 PM | #1 |
Leaky Injector
|
FS:1996 240SX S14 SE WITH S13 SR20DET SWAP 62K~ISH MILES **lots of Pics**
I have to sell my 1996 240sx. As you can tell, I have put a lot of money into this thing. When I got it was a wreck. The guy had destroyed the car however; it did have the sr20 a clean title with only 60k miles on it. I snagged it and started my build. I did everything paint, body, pulled the motor etc. This thing is not perfect at all. It is made to be driven and enjoyed not to be a show car. You could drift it if you wanted too however, I like driving fast more. Currently the car has everything hooked up and only needs a belt and a custom made line because the s13 motor and s14 body. Once those 2 items are installed it has full AC and heat (AZ Car used to live in Tucson). I am taking the car down again to have something worked on at the shop that built it SPS auto sports. The rear panels that are missing in the interior will be installed as well as the underside of the hood will match the engine bay. I will also touch up some things as best I can.
I tired to go factory everything or high-end parts. The only thing I didn’t do right is the seats because I ran out of money and time. I may have the shop put in factory seats cause the ones in it right now are so tall its hard to drive. The cluster does not match mileage that is said on title and in the info because the old cluster broke and I replaced a new one. Anyways, on to the list of parts and things I have done: Nardi Wheel NRG quick release Alpine double din deck Custom trunk / sub JL sub Alpine Amp Can’t remember what speakers however they are all there. No crack dash Power FC AEM boost controller and gauge Innovate wide band Suede roof and door inserts. Corbeau seats with racecraft harnesses Cant remember brand of Harness bar think its NRG could be wrong Nismo shift knob Nismo mats True Nismo Wheels LMGT1s Optima Battery New New Air filter 4” Greddy Intake New Intercooler piping New wiring harness Brembo Evo front breaks Brembo rotors front and rear Z32 diff It has stock fan and fan shroud (keeps it cool the best in AZ electric suck) Setrab Oil cooler and oil filter relocated Need speed sensor Skiline ebrake line Rebuild the rear e-brakes with new pads and everything Aeromotive FPR gauge Samco Blue radiator hoses Gold Pulley Kit NRG fender kit Coolent overflow tank New valve cover gaskets New painted cover Stainless clutch lines New Clutch – Clutch Masters stage 3 Nismo Power Brace ISIS large oil pan S15 turbo 550cc inject PBM coils Stance Arms upper and lower Solid bushings Solid diff bushings Jdm s14 kouki rear bumper valances New Rear Hubs Full trunk panels Full 3” exhaust Hid Headlights Clear lens Clear corners Hid interior light Hid bulbs in dash Greddy engine brace There is probably more I just cant remember it. Email me ([email protected] [email protected]) with questions pm me txt me 520-370-3249. I am looking to sell. Need to pay off my truck and some other bills. Not looking to trade unless its in my favor. Anyways, I would like to try and get 14k OR BEST OFFER! SO, if you have a offer make it. I can deliver the car for a small fee anywhere west cost.
__________________
1996 240sx se s13 SR20det, Power JC, Greedy Intake Manifold, ISIS large oil pan, Oil cooler re-locator, S15 turbo, 550cc inject, PBM coils, Stance Arms, Solid bushings, Nismo 2 way diff, Brembo brakes front, Z32 rears, Nismo LMGT1's, Corbeau seats, Alpine double din, JL sub. Last edited by gbiker; 03-02-2014 at 06:51 PM.. |
Sponsored Links |
10-27-2013, 08:12 PM | #2 |
Leaky Injector
|
__________________
1996 240sx se s13 SR20det, Power JC, Greedy Intake Manifold, ISIS large oil pan, Oil cooler re-locator, S15 turbo, 550cc inject, PBM coils, Stance Arms, Solid bushings, Nismo 2 way diff, Brembo brakes front, Z32 rears, Nismo LMGT1's, Corbeau seats, Alpine double din, JL sub. |
10-28-2013, 05:35 PM | #5 |
Leaky Injector
|
What do you mean? Do like the JDM?
__________________
1996 240sx se s13 SR20det, Power JC, Greedy Intake Manifold, ISIS large oil pan, Oil cooler re-locator, S15 turbo, 550cc inject, PBM coils, Stance Arms, Solid bushings, Nismo 2 way diff, Brembo brakes front, Z32 rears, Nismo LMGT1's, Corbeau seats, Alpine double din, JL sub. |
10-29-2013, 06:07 PM | #6 |
Zilvia Member
|
|
10-30-2013, 09:32 PM | #7 |
Leaky Injector
|
Anyone interested?? Bump
__________________
1996 240sx se s13 SR20det, Power JC, Greedy Intake Manifold, ISIS large oil pan, Oil cooler re-locator, S15 turbo, 550cc inject, PBM coils, Stance Arms, Solid bushings, Nismo 2 way diff, Brembo brakes front, Z32 rears, Nismo LMGT1's, Corbeau seats, Alpine double din, JL sub. |
11-13-2013, 05:13 PM | #8 |
Leaky Injector
|
last bump before i repost
__________________
1996 240sx se s13 SR20det, Power JC, Greedy Intake Manifold, ISIS large oil pan, Oil cooler re-locator, S15 turbo, 550cc inject, PBM coils, Stance Arms, Solid bushings, Nismo 2 way diff, Brembo brakes front, Z32 rears, Nismo LMGT1's, Corbeau seats, Alpine double din, JL sub. |
12-18-2013, 10:11 AM | #11 |
Leaky Injector
|
yea dude this thing is stupid clean i have way over 20k into it and the market is crap. So, my lost your gain. i need offers people. Its says Best offer!!! hahaha
__________________
1996 240sx se s13 SR20det, Power JC, Greedy Intake Manifold, ISIS large oil pan, Oil cooler re-locator, S15 turbo, 550cc inject, PBM coils, Stance Arms, Solid bushings, Nismo 2 way diff, Brembo brakes front, Z32 rears, Nismo LMGT1's, Corbeau seats, Alpine double din, JL sub. |
12-22-2013, 05:25 PM | #12 |
Leaky Injector
|
keep getting questions about the build of the car
here you go http://zilvia.net/f/builds-builds-on...lots-pics.html
__________________
1996 240sx se s13 SR20det, Power JC, Greedy Intake Manifold, ISIS large oil pan, Oil cooler re-locator, S15 turbo, 550cc inject, PBM coils, Stance Arms, Solid bushings, Nismo 2 way diff, Brembo brakes front, Z32 rears, Nismo LMGT1's, Corbeau seats, Alpine double din, JL sub. |
Bookmarks |
Tags |
nismo, pbm coilover, s14, sr20det 240sx s13, stance |
|
|