The Kouki S14 Thread

[nathanong87]

Originally Posted by MidnightKouki

^^^What trunk lip is that on the white one??

After like 5 months of waiting....the new hood is here. Fits perfectly too

Does the vent have ... Vents? Can't tell from pix.

[blueshark123]

Originally Posted by smellslikecurry

different car. you are thinking about whitenoise (nino)

He didnt have cs rears the only one i know that has oem aero and cs rear is marcus besides me this week.

Oh and thanks omikron for the pics aprreciate the effort.

[delado]

I'm about to the the inevitable today...

spend 300 dollars on a new usdm kouki lip.

[arlok]

Originally Posted by delado

I'm about to the the inevitable today...

spend 300 dollars on a new usdm kouki lip.

Im on the same boat dude! ill buy the usdm s14 lip this week.. the problem is it cost $300!!! OMG!!!!

[LEG1T]

Originally Posted by delado

I'm about to the the inevitable today...

spend 300 dollars on a new usdm kouki lip.

I know the feeling, me too soon.. Look at it this way it better than buy a used one for the ridiculous prices they seem to be going for..

Who are going with, Nismoshop?

[delado]

LOL.

No screw the nismo shop. They want to rape you in shipping (136 dollars)

I'm going with FRSport. Can't beat the FRSaver shipping price (16 dollars)

So yeah, 316.00

FML

[chriskilla2]

haha wait for the feeling when you scrape it.

[nikkisixx69]

few of mine from today, no roof wing as the double sided tape was comining off!! :/ so waiting on some new stuff

[driftwhat]

^^Looks good man! ^^

[LEG1T]

Originally Posted by delado

LOL.

No screw the nismo shop. They want to rape you in shipping (136 dollars)

I'm going with FRSport. Can't beat the FRSaver shipping price (16 dollars)

So yeah, 316.00

FML

lol good stuff...Will check that out..Thnx

White kouki is cool..Would look killer with a bit moar low in the front..

[OBEEWON]

What is up with all these FD spec reverse raked cars??

Wayne your car looks dumb.

Trbotuner your car looks good.

[nikkisixx69]

Originally Posted by driftwhat

^^Looks good man! ^^

thanks dude i got nothing on yours though!

Originally Posted by LEG1T

lol good stuff...Will check that out..Thnx

White kouki is cool..Would look killer with a bit moar low in the front..

thanks man! the reverse rake is not intentional at all, its just down to me being extremly lazy when it comes to lowering the front, no joke!! ill get round to it tomorrow







still it needs rear spacers and some ganadors!

[OBEEWON]

Good. Car will look good with the suspension sorted.

[punxva]

just got the 5 lug on today, also got the lip showed up today, should have the navan sides this week, just need some ruca's, toe arms, new tires, and some more pull out back so i can get rid of some of the camber and get the fitment a little better. Daily driver status, and yes recycled the wheels from the s13 for now until i decide what direction i want to go with this car

[blksylv]

What are you doing with the previous wheels?

[tricky_ab]

[spooled240]

Originally Posted by OBEEWON

What is up with all these FD spec reverse raked cars??

Wayne your car looks dumb.

Trbotuner your car looks good.

I know my opinion will not be given any fucks, but if I could be so bold as to recommend some spacers and camber up front to get that lip closer to that fender....

rules: (dirty insurance pic)

[fliprayzin240sx]

Originally Posted by punxva

just got the 5 lug on today, also got the lip showed up today, should have the navan sides this week, just need some ruca's, toe arms, new tires, and some more pull out back so i can get rid of some of the camber and get the fitment a little better. Daily driver status, and yes recycled the wheels from the s13 for now until i decide what direction i want to go with this car

That is one ugly ass hood...you should sell it to me...

[Om1kron]

Originally Posted by spooled240

I know my opinion will not be given any fucks, but if I could be so bold as to recommend some spacers and camber up front to get that lip closer to that fender....

Why would I need spacers, I only run 2.5 degree's of camber up front. I could crank it if I wanted to. Car is a little grabby as is, spaceship camber is going to cause me to pull on our roads.

I'm going to raise the rear next time I go to the shop, just like the other dude I'm way too fucking lazy to even attempt jacking my car up at home with a service jack. need two jacks to raise the back of the car now and getting anything under the front is a joke.

[lflkajfj12123]

my car has -7 camber

drives straight as an arrow and grips great around corners

shrug

[spooled240]

Originally Posted by Om1kron

Why would I need spacers, I only run 2.5 degree's of camber up front. I could crank it if I wanted to. Car is a little grabby as is, spaceship camber is going to cause me to pull on our roads.

but then it wouldn't be flush with more camber

if the cross camber is within spec then it would still drive straight as an arrow even with -6 degrees of camber

just sayin

[zz_kouki_zz]

Originally Posted by st165

Ganda talaga ng kotse mo pre Pag naka-uwi ako sa pinas bili talaga ako ng S15 sa Davao!

[Om1kron]

Originally Posted by spooled240

but then it wouldn't be flush with more camber

if the cross camber is within spec then it would still drive straight as an arrow even with -6 degrees of camber

just sayin

I'll look into it when I get another alignment. right now I'm dragging on speedbumps so lower doesn't look like it's happening. my sideskirts are riveted in so a LOT of shit is going to break if I snag on something.

[gbaby2089]

Do you just drive straight over everything?

[MidnightKouki]

Originally Posted by nathanong87

Does the vent have ... Vents? Can't tell from pix.

Yeah all the vents are there....Although I wish they weren't since I live in the rain capital of the goddamn universe.

[95KA-Turbo]

Originally Posted by punxva

just got the 5 lug on today, also got the lip showed up today, should have the navan sides this week, just need some ruca's, toe arms, new tires, and some more pull out back so i can get rid of some of the camber and get the fitment a little better. Daily driver status, and yes recycled the wheels from the s13 for now until i decide what direction i want to go with this car

http://i24.photobucket.com/albums/c2...52305266_o.jpg

Nice, we're both getting closer to being able to do a shoot together, haha.


I beat the shit out of this thing today in an effort to make everything fit without rubbing. So far no rubbing out back and it only rubs on the inner wheel well on full lock. It doesn't sit as low as I have it jacked up to in this picture, but after I drive on the interstate tomorrow and tackle the speed bumps all over it I'll see if I can lower it without having to do more work.

[silviaks2nr]

Originally Posted by s0apgun

my car has -7 camber

drives straight as an arrow and grips great around corners

shrug

I ran a decent amount of camber up front for a bit and really really did not feel safe driving it on the street. Braking performance is seriously sketchy even with a good compound tire.

[smellslikecurry]

[Tuckedin]

Originally Posted by 95KA-Turbo

Nice, we're both getting closer to being able to do a shoot together, haha.


I beat the shit out of this thing today in an effort to make everything fit without rubbing. So far no rubbing out back and it only rubs on the inner wheel well on full lock. It doesn't sit as low as I have it jacked up to in this picture, but after I drive on the interstate tomorrow and tackle the speed bumps all over it I'll see if I can lower it without having to do more work.

Looking good.

[punxva]

Originally Posted by fliprayzin240sx

That is one ugly ass hood...you should sell it to me...

trade me straight for a stock kouki hood and it's a deal Ray