fuel injectors - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

iveexcaped3 · 06-30-2011, 09:14 PM

what injectors fit in what motors with no modifications?
example
will sr20 injectors fit a ka24e?
ka24de in a ka24e?
stuff like that any help would be good thanks

jdm213 · 07-01-2011, 09:58 AM

z32 fit in sr and sr fit in ka when your turboing them

iveexcaped3 · 07-01-2011, 01:31 PM

so you can only swap when your turbo charging because of the stand alone or what?

eklips3 · 07-01-2011, 11:12 PM

no dude ..

turbocharging = more air into engine.
more air needs more fuel.

bigger injectors = more fuel

and yes you will need some kind of tuning when you turbocharge a ka.

this thread wont give you any answers anyways man. try using google or the zilvia search engine. the world of injectors is very vast.

iveexcaped3 · 07-02-2011, 08:33 PM

i know turbo charging is more air in the cyl. meaning needs more gas so you swap to bigger injectors. the injectors are bad on my ka and i was wondering if i could switch to sr injectors without turbo charging. thats why i was mainly asking

OkiDori17 · 07-02-2011, 09:52 PM

if you replace with bigger injectors you'll have to re-tune the ecu, but i do know KA injectors fit on the SR so i don't see why the SRs wont fit on the KA
if i were you though id just upgrade to some nice Deatsch Werks

iveexcaped3 · 07-03-2011, 12:04 AM

thats what i was looking for. i didnt know if you had to flash the ecu or get a stand alone. there's always deals on sr20 injectors so i was gonna swoop some up if i didnt need to retune. thanks guys appreciate it

army240 · 07-03-2011, 12:21 AM

Yes, you need to retune or a stand alone... KA are 270cc, and SR are 370cc... by retuning you will tell your ECU to inject 73% of his "normal" pulse width to inject the same quantity.

Frank

iveexcaped3 · 07-03-2011, 11:11 PM

Ok. So both ka-e and ka-de injectors are the same right. Only difference is the head.

Sileighty_85 · 07-03-2011, 11:15 PM

Quote:

Originally Posted by iveexcaped3

Ok. So both ka-e and ka-de injectors are the same right. Only difference is the head.

Wrong KA-E are Top Feed, KADE are Side feed, Totally different

***S14DB*** · 07-03-2011, 11:38 PM

Quote:

Originally Posted by iveexcaped3

i know turbo charging is more air in the cyl. meaning needs more gas so you swap to bigger injectors. the injectors are bad on my ka and i was wondering if i could switch to sr injectors without turbo charging. thats why i was mainly asking

The KA was found in more cars than the 240sx. You can get the stock injectors from several more common cars like the Altima.

iveexcaped3 · 07-04-2011, 01:50 AM

Sileighty_85 thank you. just saved me some cash. pretty much you cant switch any injectors with each other with out tuning.

240sohc · 07-04-2011, 02:18 AM

why not have your injectors tested and cleaned/calibrated. RC Engineering in Torrance does this service.

Tantwoforty · 07-04-2011, 07:08 AM

i ran junkyard altama injectors for months with no problems and there only 2 bucks for as many as you can find
sort of

Quote:

Originally Posted by iveexcaped3

pretty much you cant switch any injectors with each other with out tuning.

yup
you can use a safc if you must. but its not a good option really. ok if your not running any or much boost.. but its not really worth the money..
i would just junkyard some injectors and run them untill your ready to turbo. and then do it right.
i guess you could get a safc, a wideband and some sr injectors and try to squeeze alittle more power out of the ka.. but i doubt you would do anything but make your car run shitty.

iveexcaped3 · 07-04-2011, 10:18 AM

When I took the fuel rail off all injectors were on the rail and as I went to put it on the parts table three fell and broke the plasic tips on them

DeatschWerks · 07-05-2011, 08:30 AM

Be sure you know what year the Z32 is you are pulling from. 90-94 300ZXs use Phase-I injectors. This year range covers most of Z32's imported to the states. The 95-96 Z32s use Phase-II, just like all of the KA and SRs.

You could also pull from a Q45. V8 = 2 sets of injectors, but you need to take the same precautions. The early Q45 came with Phase-I, too.

I would highly recommend getting any junk yard pulls checked and serviced before installing!

DeatschWerks · 07-05-2011, 08:44 AM

Just so you know...the Phase-I and Phase-II are not interchangeable.

You can run (and most do when they have to replace) a Phase-II in a Phase-I application with an adaptor kit. DeatschWerks.com | P1-P2 Sidefeed Injector Adapter Kit | DeatschWerks

06-30-2011, 09:14 PM	#1
iveexcaped3 Zilvia Addict Join Date: Dec 2010 Location: riverside, ca Posts: 967 Trader Rating: (0) Feedback Score: 0 reviews	fuel injectors what injectors fit in what motors with no modifications? example will sr20 injectors fit a ka24e? ka24de in a ka24e? stuff like that any help would be good thanks

07-01-2011, 11:12 PM	#4
eklips3 Zilvia Addict Join Date: Apr 2008 Location: Calgary Canada Age: 34 Posts: 626 Trader Rating: (3) Feedback Score: 3 reviews	no dude .. turbocharging = more air into engine. more air needs more fuel. bigger injectors = more fuel and yes you will need some kind of tuning when you turbocharge a ka. this thread wont give you any answers anyways man. try using google or the zilvia search engine. the world of injectors is very vast. __________________ 1992 240sx (RB20. 362whp@16psi)

07-02-2011, 09:52 PM	#6
OkiDori17 Zilvia Junkie Join Date: Jan 2011 Location: Columbus, GA Posts: 373 Trader Rating: (6) Feedback Score: 6 reviews	if you replace with bigger injectors you'll have to re-tune the ecu, but i do know KA injectors fit on the SR so i don't see why the SRs wont fit on the KA if i were you though id just upgrade to some nice Deatsch Werks __________________ '92 240sx w/'93 SR Blacktop /// '94 RX7 FD3S /// '11 370z RIP

07-03-2011, 12:21 AM	#8
army240 Zilvia Junkie Join Date: May 2008 Location: Quebec Age: 39 Posts: 306 Trader Rating: (1) Feedback Score: 1 reviews	Yes, you need to retune or a stand alone... KA are 270cc, and SR are 370cc... by retuning you will tell your ECU to inject 73% of his "normal" pulse width to inject the same quantity. Frank __________________ Life is a beat to beat

07-05-2011, 08:30 AM	#16
DeatschWerks Zilvia Member Join Date: Jun 2005 Location: OK Posts: 279 Trader Rating: (1) Feedback Score: 1 reviews	Be sure you know what year the Z32 is you are pulling from. 90-94 300ZXs use Phase-I injectors. This year range covers most of Z32's imported to the states. The 95-96 Z32s use Phase-II, just like all of the KA and SRs. You could also pull from a Q45. V8 = 2 sets of injectors, but you need to take the same precautions. The early Q45 came with Phase-I, too. I would highly recommend getting any junk yard pulls checked and serviced before installing! __________________ Chris @ DeatschWerks.com Fueling Your Passion for Performance!

07-01-2011, 09:58 AM	#2
jdm213 Zilvia Addict Join Date: Sep 2009 Location: los angeles Age: 33 Posts: 960 Trader Rating: (10) Feedback Score: 10 reviews	z32 fit in sr and sr fit in ka when your turboing them

07-01-2011, 01:31 PM	#3
iveexcaped3 Zilvia Addict Join Date: Dec 2010 Location: riverside, ca Posts: 967 Trader Rating: (0) Feedback Score: 0 reviews	so you can only swap when your turbo charging because of the stand alone or what?

07-02-2011, 08:33 PM	#5
iveexcaped3 Zilvia Addict Join Date: Dec 2010 Location: riverside, ca Posts: 967 Trader Rating: (0) Feedback Score: 0 reviews	i know turbo charging is more air in the cyl. meaning needs more gas so you swap to bigger injectors. the injectors are bad on my ka and i was wondering if i could switch to sr injectors without turbo charging. thats why i was mainly asking

07-03-2011, 12:04 AM	#7
iveexcaped3 Zilvia Addict Join Date: Dec 2010 Location: riverside, ca Posts: 967 Trader Rating: (0) Feedback Score: 0 reviews	thats what i was looking for. i didnt know if you had to flash the ecu or get a stand alone. there's always deals on sr20 injectors so i was gonna swoop some up if i didnt need to retune. thanks guys appreciate it

07-03-2011, 11:11 PM	#9
iveexcaped3 Zilvia Addict Join Date: Dec 2010 Location: riverside, ca Posts: 967 Trader Rating: (0) Feedback Score: 0 reviews	Ok. So both ka-e and ka-de injectors are the same right. Only difference is the head.

07-04-2011, 01:50 AM	#12
iveexcaped3 Zilvia Addict Join Date: Dec 2010 Location: riverside, ca Posts: 967 Trader Rating: (0) Feedback Score: 0 reviews	Sileighty_85 thank you. just saved me some cash. pretty much you cant switch any injectors with each other with out tuning.

07-04-2011, 02:18 AM	#13
240sohc Zilvia Member Join Date: Jan 2010 Location: park bench Posts: 206 Trader Rating: (14) Feedback Score: 14 reviews	why not have your injectors tested and cleaned/calibrated. RC Engineering in Torrance does this service.

07-04-2011, 10:18 AM	#15
iveexcaped3 Zilvia Addict Join Date: Dec 2010 Location: riverside, ca Posts: 967 Trader Rating: (0) Feedback Score: 0 reviews	When I took the fuel rail off all injectors were on the rail and as I went to put it on the parts table three fell and broke the plasic tips on them

07-05-2011, 08:44 AM	#17
DeatschWerks Zilvia Member Join Date: Jun 2005 Location: OK Posts: 279 Trader Rating: (1) Feedback Score: 1 reviews	Just so you know...the Phase-I and Phase-II are not interchangeable. You can run (and most do when they have to replace) a Phase-II in a Phase-I application with an adaptor kit. DeatschWerks.com \| P1-P2 Sidefeed Injector Adapter Kit \| DeatschWerks __________________ Chris @ DeatschWerks.com Fueling Your Passion for Performance!