PMC Motorsports 2JZ/5SPD ZF/S13 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

epik1 · 07-30-2020, 07:29 PM

Hey guys,

anyone else using this combo?
- 2JZGTE
- BMW ZF 5SPD E46 Trans w/ E46 Clutch Slave
- In S13

Having an issue where my clutch isn't fully disengaging.

I've tried bleeding it a few times to make sure.
Was suggested to try and E36 Clutch slave and the rod ended up coming out when trying to bleed it.

Was also suggested to try adding a washer behind the brass pivot pin and to try a 3/4" Wilwood Master Cylinder, which I have on order right now but just want to see if anyone else has it working or has had the same issue.

Thanks!

07-30-2020, 07:29 PM	#1
epik1 Zilvia Member Join Date: Mar 2011 Location: Scarberia, Ontario, Canada Posts: 156 Trader Rating: (2) Feedback Score: 2 reviews	PMC Motorsports 2JZ/5SPD ZF/S13 Hey guys, anyone else using this combo? - 2JZGTE - BMW ZF 5SPD E46 Trans w/ E46 Clutch Slave - In S13 Having an issue where my clutch isn't fully disengaging. I've tried bleeding it a few times to make sure. Was suggested to try and E36 Clutch slave and the rod ended up coming out when trying to bleed it. Was also suggested to try adding a washer behind the brass pivot pin and to try a 3/4" Wilwood Master Cylinder, which I have on order right now but just want to see if anyone else has it working or has had the same issue. Thanks!