Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Go Back   Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum > General > Tech Talk

Tech Talk Technical Discussion About The Nissan 240SX and Nissan Z Cars


Reply
 
Thread Tools Display Modes
Old 09-10-2011, 11:41 AM   #1
Jake1992
Leaky Injector
 
Jake1992's Avatar
 
Join Date: Aug 2011
Location: Caribbean/ Shipping add FL
Posts: 137
Trader Rating: (2)
Jake1992 is an unknown quantity at this point
Feedback Score: 2 reviews
skyline r33 rack and pinnion fit an s14 ?

mine started leaking and looking for a new one i came accross a skyline...
help!

thanks ..
Jake1992 is offline   Reply With Quote
Sponsored Links
Old 09-10-2011, 07:42 PM   #2
fliprayzin240sx
Man w/ CTSV & a Car Seat
 
fliprayzin240sx's Avatar
 
Join Date: Aug 2002
Location: Tampa
Posts: 17,998
Trader Rating: (19)
fliprayzin240sx is close to perfectionfliprayzin240sx is close to perfectionfliprayzin240sx is close to perfectionfliprayzin240sx is close to perfectionfliprayzin240sx is close to perfectionfliprayzin240sx is close to perfectionfliprayzin240sx is close to perfectionfliprayzin240sx is close to perfectionfliprayzin240sx is close to perfectionfliprayzin240sx is close to perfectionfliprayzin240sx is close to perfection
Feedback Score: 19 reviews
Send a message via AIM to fliprayzin240sx
It'll mount up but not sure the tie rods are too long or if the steering shaft will line up.
__________________

If you think Zilvia has too many assholes...
CLICK HERE!!!
fliprayzin240sx is offline   Reply With Quote
Old 09-11-2011, 04:54 PM   #3
Jake1992
Leaky Injector
 
Jake1992's Avatar
 
Join Date: Aug 2011
Location: Caribbean/ Shipping add FL
Posts: 137
Trader Rating: (2)
Jake1992 is an unknown quantity at this point
Feedback Score: 2 reviews
Quote:
Originally Posted by fliprayzin240sx View Post
It'll mount up but not sure the tie rods are too long or if the steering shaft will line up.
thanks... anyone else?
Jake1992 is offline   Reply With Quote
Old 09-11-2011, 05:14 PM   #4
Sileighty_85
Post Whore!
 
Sileighty_85's Avatar
 
Join Date: Dec 2006
Location: Misawa, Japan
Posts: 6,815
Trader Rating: (8)
Sileighty_85 is close to perfectionSileighty_85 is close to perfectionSileighty_85 is close to perfectionSileighty_85 is close to perfectionSileighty_85 is close to perfectionSileighty_85 is close to perfectionSileighty_85 is close to perfectionSileighty_85 is close to perfectionSileighty_85 is close to perfectionSileighty_85 is close to perfectionSileighty_85 is close to perfection
Feedback Score: 8 reviews
it might, Like flip says it will mount up, might be able to swap over the S14 tie rods. Steering U Joint might as well..... Not 100% sure
__________________
後輪駆動車1番
1989 Built SR GT2871R -363whp
1998 S14 W/RB25- 250ish (For Now)
1986 SR86 - 200ish
1990 R32 GTR - 320hp
Don't Buy Engines from JDM-Online http://zilvia.net/f/businesses/207457-jdm-online.html
Don't Buy XS-Power or SSAC Shit
Sileighty_85 is offline   Reply With Quote
Old 09-12-2011, 08:21 AM   #5
Jake1992
Leaky Injector
 
Jake1992's Avatar
 
Join Date: Aug 2011
Location: Caribbean/ Shipping add FL
Posts: 137
Trader Rating: (2)
Jake1992 is an unknown quantity at this point
Feedback Score: 2 reviews
Quote:
Originally Posted by Sileighty_85 View Post
it might, Like flip says it will mount up, might be able to swap over the S14 tie rods. Steering U Joint might as well..... Not 100% sure
thanks.... ill guess ill have to check it out
Jake1992 is offline   Reply With Quote
Old 01-23-2012, 10:23 AM   #6
Jake1992
Leaky Injector
 
Jake1992's Avatar
 
Join Date: Aug 2011
Location: Caribbean/ Shipping add FL
Posts: 137
Trader Rating: (2)
Jake1992 is an unknown quantity at this point
Feedback Score: 2 reviews
for who ever is wondering ...

It mounts up without a problem.
Then comes the problem with the oil feed
to the pump... it has a banjo fitting , and
the s14 has a hardline going in and a screw bolt thingy
that screws it in place, that wont fit in the skyline
rack, so i got a banjo welded on my hardline.
the return is a niple so simple with some clamps and hoses.
now. Did not test yet ... but does anyone know about the solenoid
on the rack of a skyline and how to hardwire it ?
Jake1992 is offline   Reply With Quote
Reply

Bookmarks


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 02:30 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
vB.Sponsors
Copyright © 1998 - 2019, Zilvia.net™