Tron's S13 Hatch // PNW - Page 6 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Wykydtron · 02-17-2020, 03:04 PM

Open drift video (yeah I’m not a vlogger just recording some runs to look back on some day)

https://youtu.be/CUbMpupHKm4

Sent from my iPhone using Tapatalk

Wykydtron · 03-02-2020, 04:23 AM

Just an update, I made it through 3 drift events since I dynoed 345whp/314tq and I blew out 2nd gear. I was hot lapping and initiating in third (no clutch kicks, just faint entry) and I down shifted into 2nd and got on it. 2nd gear left the chat. I bought a Z32 transmission and I’ll be swapping that in as soon as I can.

Added some photos from when I street drove the car 3 hours to spirit peaks. I’m lucky it didn’t go out while I was down south.

Sent from my iPhone using Tapatalk

Wykydtron · 03-02-2020, 06:30 AM

I started taking apart the Z32 transmission to send the bell housing off to Mazworx. I was having a really difficult time removing the check spring ball and retainer plug in the size of the bell housing. I made a short video on how to get that off:

https://youtu.be/muApr-pN6xY

Sent from my iPhone using Tapatalk

Wykydtron · 03-03-2020, 11:08 PM

The bell housing is off to Mazworx to get machined! Also bonus photos from the last open drift on March 1st!

Sent from my iPhone using Tapatalk

Wykydtron · 03-05-2020, 09:54 PM

Peeling the vinyl away for paint.

Sent from my iPhone using Tapatalk

Agamemnon · 03-06-2020, 01:33 PM

Looking good.
Where are you taking it for paint?

Wykydtron · 03-07-2020, 04:25 PM

Quote:

Originally Posted by Agamemnon

Looking good.
Where are you taking it for paint?

Paul Wise

Sent from my iPhone using Tapatalk

Wykydtron · 03-07-2020, 04:37 PM

I bought the Xcessive Manufacturing shortened bracket to reposition the Z32 shifter to work with the stock 240sx tunnel hole and everyone on Facebook told me to throw the Xcessive linkage out the window. Apparently their notorious for binding up or falling apart? Dpomps offered to cut and weld the stock linkage. Basically if you remove the 3-4 inch bar between the U joints, the length is almost identical to the linkage. Other people on Facebook suggested using the LOJ Conversion linkage, which is a higher quality machined link.

Derrik has dealt with the same issues others reported and advices to just go this route.

I won't get Mazworx adapter kit until probably the last week of March, so this is cutting it close for the April events. I'll probably have to slap this in the day before PARC.

Sent from my iPhone using Tapatalk

Wykydtron · 03-09-2020, 01:01 AM

Well since I blew up my transmission, I bought another KA transmission to get me to paint. I brought my car to Frowsh's dad's to work on it on the lift.

Turns out my life that weight flywheel teeth was destroyed from the old starter I just replaced.

I replaced it with an OEM flywheel I had laying around. Yes I cleaned it, no I didn't have time to resurface it. When I throw the z32 transmission in, I will get another flywheel resurfaced.

https://youtu.be/e1gTAtEfu-c

Sent from my iPhone using Tapatalk

Wykydtron · 03-09-2020, 10:05 PM

Benefits of owning a hatch

Sent from my iPhone using Tapatalk

Wykydtron · 03-19-2020, 12:10 PM

Here's my little adventure to Bend Oregon to get my car painted.

I am terrible at talking to myself, I also have no idea what I'm doing when it comes to vlogging. I mostly create these videos to look back on as memories. Plus my mom has no idea what I do with this motorsports, so I share it with her.

https://www.youtube.com/watch?v=a81rlLPj5LY

Wykydtron · 05-19-2020, 10:32 AM

Sent from my iPhone using Tapatalk

Wykydtron · 05-19-2020, 10:33 AM

Sent from my iPhone using Tapatalk

Wykydtron · 05-19-2020, 10:34 AM

Sent from my iPhone using Tapatalk

Wykydtron · 05-19-2020, 10:38 AM

Sent from my iPhone using Tapatalk

Wykydtron · 05-19-2020, 10:40 AM

Sent from my iPhone using Tapatalk

Wykydtron · 05-19-2020, 10:41 AM

Sent from my iPhone using Tapatalk

Wykydtron · 05-19-2020, 10:42 AM

Sent from my iPhone using Tapatalk

Wykydtron · 05-19-2020, 10:47 AM

Sent from my iPhone using Tapatalk

Wykydtron · 05-19-2020, 10:50 AM

Don?t have time to put info, I?ll write something up later.

Here?s a video from the weekend as we all prep for Summerjam. This was supposed to be for Final Bout SSNW but COVID happened.

https://youtu.be/zrcxhWIbgPg

Sent from my iPhone using Tapatalk

Thursday7 · 05-19-2020, 12:52 PM

Damn, what an outcome.

That Ford is tough too.

Wykydtron · 06-02-2020, 03:07 PM

Summer Jam at PARC was completely out of control! I should do a write up on the shenanigans that went down. I did throw together a video edit that blew up on Facebook! I will post the YouTube video below.

Yes my car caught on fire on day 1. Yes I kept drifting!!!

Sent from my iPhone using Tapatalk

Wykydtron · 06-02-2020, 03:11 PM

Here is my Summer Jam 2020 recap video, most of the video was taken by me, a friend in passenger, or sent via Snapchat. IT WAS A WILD WEEKEND.

https://youtu.be/5jR5zluONHw

If you guys REALLY wanna read background story on what happened and who tf the titties b, read this comment thread: https://www.facebook.com/photo?fbid=...08046063015958

Wykydtron · 06-07-2020, 12:34 PM

I forgot to take pictures, but I bought ISR braided brake lines for the S13. Threw them on on Friday before the evergreen open drift.

PoorMans180SX · 06-14-2020, 09:45 AM

This is one excellent looking hatch you have here sir.

tricky_ab · 06-15-2020, 11:46 AM

Ohhhh I had seen pictures of the fire, but didn't realize the owner was on here. I imagine it was small? (small amount of damage)

Wykydtron · 07-02-2020, 09:57 AM

Quote:

Originally Posted by tricky_ab

Ohhhh I had seen pictures of the fire, but didn't realize the owner was on here. I imagine it was small? (small amount of damage)

Yeah it wasn?t to bad. Brake line leaked and ignited from the hot sparking rear caliper. That caught the plastic shield on fire. No fuel leak. We good. I?m still driving around Seattle like this lmao

yaba94070 · 06-18-2020, 10:50 AM

looks great 2020

Wykydtron · 07-02-2020, 10:03 AM

Soooo if no one saw my IG and Snaps from last weekend, my muffler literally exploded at the open drift!!!! I drove home with it scraping on the ground!

Thankfully my friend David is a really good fabricator. He had a stainless piecut turn down exhaust (dolphin tip, lobster top exhaust) sitting in his garage.

He?s now officially my go to fabricator, he literally lives down the street from me! [emoji23]

Sound clip of the exhaust 2step

https://youtu.be/WmrRd6Y5s5U

Sent from my iPhone using Tapatalk

Wykydtron · 07-02-2020, 10:12 AM

Heres a few clips from last weekends Open Drift at Evergreen Speedway

https://youtu.be/GEKK1vrpFq0

Sent from my iPhone using Tapatalk

02-17-2020, 03:04 PM	#1
Wykydtron Zilvia Addict Join Date: Oct 2006 Location: Skykomish, WA Posts: 909 Trader Rating: (0) Feedback Score: 0 reviews	Open drift video (yeah I’m not a vlogger just recording some runs to look back on some day) https://youtu.be/CUbMpupHKm4 Sent from my iPhone using Tapatalk __________________ @schassis.eddi

03-02-2020, 04:23 AM	#2
Wykydtron Zilvia Addict Join Date: Oct 2006 Location: Skykomish, WA Posts: 909 Trader Rating: (0) Feedback Score: 0 reviews	Tron's S13 Hatch // PNW Just an update, I made it through 3 drift events since I dynoed 345whp/314tq and I blew out 2nd gear. I was hot lapping and initiating in third (no clutch kicks, just faint entry) and I down shifted into 2nd and got on it. 2nd gear left the chat. I bought a Z32 transmission and I’ll be swapping that in as soon as I can. Added some photos from when I street drove the car 3 hours to spirit peaks. I’m lucky it didn’t go out while I was down south. Sent from my iPhone using Tapatalk __________________ @schassis.eddi

03-02-2020, 06:30 AM	#3
Wykydtron Zilvia Addict Join Date: Oct 2006 Location: Skykomish, WA Posts: 909 Trader Rating: (0) Feedback Score: 0 reviews	Tron's S13 Hatch // PNW I started taking apart the Z32 transmission to send the bell housing off to Mazworx. I was having a really difficult time removing the check spring ball and retainer plug in the size of the bell housing. I made a short video on how to get that off: https://youtu.be/muApr-pN6xY Sent from my iPhone using Tapatalk __________________ @schassis.eddi

03-03-2020, 11:08 PM	#4
Wykydtron Zilvia Addict Join Date: Oct 2006 Location: Skykomish, WA Posts: 909 Trader Rating: (0) Feedback Score: 0 reviews	Tron's S13 Hatch // PNW The bell housing is off to Mazworx to get machined! Also bonus photos from the last open drift on March 1st! Sent from my iPhone using Tapatalk __________________ @schassis.eddi

03-05-2020, 09:54 PM	#5
Wykydtron Zilvia Addict Join Date: Oct 2006 Location: Skykomish, WA Posts: 909 Trader Rating: (0) Feedback Score: 0 reviews	Peeling the vinyl away for paint. Sent from my iPhone using Tapatalk __________________ @schassis.eddi

03-06-2020, 01:33 PM	#6
Agamemnon Post Whore! Join Date: Sep 2003 Location: Lake Stevens, WA Age: 41 Posts: 2,657 Trader Rating: (20) Feedback Score: 20 reviews	Looking good. Where are you taking it for paint?

03-07-2020, 04:37 PM	#8
Wykydtron Zilvia Addict Join Date: Oct 2006 Location: Skykomish, WA Posts: 909 Trader Rating: (0) Feedback Score: 0 reviews	I bought the Xcessive Manufacturing shortened bracket to reposition the Z32 shifter to work with the stock 240sx tunnel hole and everyone on Facebook told me to throw the Xcessive linkage out the window. Apparently their notorious for binding up or falling apart? Dpomps offered to cut and weld the stock linkage. Basically if you remove the 3-4 inch bar between the U joints, the length is almost identical to the linkage. Other people on Facebook suggested using the LOJ Conversion linkage, which is a higher quality machined link. Derrik has dealt with the same issues others reported and advices to just go this route. I won't get Mazworx adapter kit until probably the last week of March, so this is cutting it close for the April events. I'll probably have to slap this in the day before PARC. Sent from my iPhone using Tapatalk __________________ @schassis.eddi

03-09-2020, 01:01 AM	#9
Wykydtron Zilvia Addict Join Date: Oct 2006 Location: Skykomish, WA Posts: 909 Trader Rating: (0) Feedback Score: 0 reviews	Well since I blew up my transmission, I bought another KA transmission to get me to paint. I brought my car to Frowsh's dad's to work on it on the lift. Turns out my life that weight flywheel teeth was destroyed from the old starter I just replaced. I replaced it with an OEM flywheel I had laying around. Yes I cleaned it, no I didn't have time to resurface it. When I throw the z32 transmission in, I will get another flywheel resurfaced. https://youtu.be/e1gTAtEfu-c Sent from my iPhone using Tapatalk __________________ @schassis.eddi

03-09-2020, 10:05 PM	#10
Wykydtron Zilvia Addict Join Date: Oct 2006 Location: Skykomish, WA Posts: 909 Trader Rating: (0) Feedback Score: 0 reviews	Benefits of owning a hatch Sent from my iPhone using Tapatalk __________________ @schassis.eddi

03-19-2020, 12:10 PM	#11
Wykydtron Zilvia Addict Join Date: Oct 2006 Location: Skykomish, WA Posts: 909 Trader Rating: (0) Feedback Score: 0 reviews	Here's my little adventure to Bend Oregon to get my car painted. I am terrible at talking to myself, I also have no idea what I'm doing when it comes to vlogging. I mostly create these videos to look back on as memories. Plus my mom has no idea what I do with this motorsports, so I share it with her. https://www.youtube.com/watch?v=a81rlLPj5LY __________________ @schassis.eddi

05-19-2020, 10:32 AM	#12
Wykydtron Zilvia Addict Join Date: Oct 2006 Location: Skykomish, WA Posts: 909 Trader Rating: (0) Feedback Score: 0 reviews	Sent from my iPhone using Tapatalk __________________ @schassis.eddi

05-19-2020, 10:33 AM	#13
Wykydtron Zilvia Addict Join Date: Oct 2006 Location: Skykomish, WA Posts: 909 Trader Rating: (0) Feedback Score: 0 reviews	Sent from my iPhone using Tapatalk __________________ @schassis.eddi

05-19-2020, 10:34 AM	#14
Wykydtron Zilvia Addict Join Date: Oct 2006 Location: Skykomish, WA Posts: 909 Trader Rating: (0) Feedback Score: 0 reviews	Sent from my iPhone using Tapatalk __________________ @schassis.eddi

05-19-2020, 10:38 AM	#15
Wykydtron Zilvia Addict Join Date: Oct 2006 Location: Skykomish, WA Posts: 909 Trader Rating: (0) Feedback Score: 0 reviews	Sent from my iPhone using Tapatalk __________________ @schassis.eddi

05-19-2020, 10:40 AM	#16
Wykydtron Zilvia Addict Join Date: Oct 2006 Location: Skykomish, WA Posts: 909 Trader Rating: (0) Feedback Score: 0 reviews	Sent from my iPhone using Tapatalk __________________ @schassis.eddi

05-19-2020, 10:41 AM	#17
Wykydtron Zilvia Addict Join Date: Oct 2006 Location: Skykomish, WA Posts: 909 Trader Rating: (0) Feedback Score: 0 reviews	Sent from my iPhone using Tapatalk __________________ @schassis.eddi

05-19-2020, 10:42 AM	#18
Wykydtron Zilvia Addict Join Date: Oct 2006 Location: Skykomish, WA Posts: 909 Trader Rating: (0) Feedback Score: 0 reviews	Sent from my iPhone using Tapatalk __________________ @schassis.eddi

05-19-2020, 10:47 AM	#19
Wykydtron Zilvia Addict Join Date: Oct 2006 Location: Skykomish, WA Posts: 909 Trader Rating: (0) Feedback Score: 0 reviews	Sent from my iPhone using Tapatalk __________________ @schassis.eddi

05-19-2020, 10:50 AM	#20
Wykydtron Zilvia Addict Join Date: Oct 2006 Location: Skykomish, WA Posts: 909 Trader Rating: (0) Feedback Score: 0 reviews	Tron's S13 Hatch // PNW Don?t have time to put info, I?ll write something up later. Here?s a video from the weekend as we all prep for Summerjam. This was supposed to be for Final Bout SSNW but COVID happened. https://youtu.be/zrcxhWIbgPg Sent from my iPhone using Tapatalk __________________ @schassis.eddi

05-19-2020, 12:52 PM	#21
Thursday7 Zilvia Addict Join Date: Jul 2011 Location: PA Posts: 800 Trader Rating: (8) Feedback Score: 8 reviews	Damn, what an outcome. That Ford is tough too.

06-02-2020, 03:07 PM	#22
Wykydtron Zilvia Addict Join Date: Oct 2006 Location: Skykomish, WA Posts: 909 Trader Rating: (0) Feedback Score: 0 reviews	Summer Jam at PARC was completely out of control! I should do a write up on the shenanigans that went down. I did throw together a video edit that blew up on Facebook! I will post the YouTube video below. Yes my car caught on fire on day 1. Yes I kept drifting!!! Sent from my iPhone using Tapatalk __________________ @schassis.eddi

06-02-2020, 03:11 PM	#23
Wykydtron Zilvia Addict Join Date: Oct 2006 Location: Skykomish, WA Posts: 909 Trader Rating: (0) Feedback Score: 0 reviews	Tron's S13 Hatch // PNW Here is my Summer Jam 2020 recap video, most of the video was taken by me, a friend in passenger, or sent via Snapchat. IT WAS A WILD WEEKEND. https://youtu.be/5jR5zluONHw If you guys REALLY wanna read background story on what happened and who tf the titties b, read this comment thread: https://www.facebook.com/photo?fbid=...08046063015958 __________________ @schassis.eddi

06-07-2020, 12:34 PM	#24
Wykydtron Zilvia Addict Join Date: Oct 2006 Location: Skykomish, WA Posts: 909 Trader Rating: (0) Feedback Score: 0 reviews	I forgot to take pictures, but I bought ISR braided brake lines for the S13. Threw them on on Friday before the evergreen open drift. __________________ @schassis.eddi

06-14-2020, 09:45 AM	#25
PoorMans180SX Zilvia.net Advertiser Join Date: Nov 2005 Location: Michigan Age: 36 Posts: 5,574 Trader Rating: (16) Rides Gallery: PoorMans180SX Feedback Score: 16 reviews	This is one excellent looking hatch you have here sir. __________________ Build: http://zilvia.net/f/showthread.php?t=643065 Friends don't let friends buy knock-offs.

06-15-2020, 11:46 AM	#26
tricky_ab Post Whore! Join Date: Sep 2008 Location: It's dark, and hell is hot! Posts: 9,414 Trader Rating: (23) Feedback Score: 23 reviews	Ohhhh I had seen pictures of the fire, but didn't realize the owner was on here. I imagine it was small? (small amount of damage) __________________ Instagram Back for round two... 4 doors this time around...

06-18-2020, 10:50 AM	#28
yaba94070 Zilvia Junkie Join Date: Oct 2006 Location: Redwood City Posts: 536 Trader Rating: (5) Feedback Score: 5 reviews	looks so good looks great 2020 __________________ one 2 many 240's and I just keep coming back for more

07-02-2020, 10:03 AM	#29
Wykydtron Zilvia Addict Join Date: Oct 2006 Location: Skykomish, WA Posts: 909 Trader Rating: (0) Feedback Score: 0 reviews	Tron's S13 Hatch // PNW Soooo if no one saw my IG and Snaps from last weekend, my muffler literally exploded at the open drift!!!! I drove home with it scraping on the ground! Thankfully my friend David is a really good fabricator. He had a stainless piecut turn down exhaust (dolphin tip, lobster top exhaust) sitting in his garage. He?s now officially my go to fabricator, he literally lives down the street from me! [emoji23] Sound clip of the exhaust 2step https://youtu.be/WmrRd6Y5s5U Sent from my iPhone using Tapatalk __________________ @schassis.eddi

07-02-2020, 10:12 AM	#30
Wykydtron Zilvia Addict Join Date: Oct 2006 Location: Skykomish, WA Posts: 909 Trader Rating: (0) Feedback Score: 0 reviews	Tron's S13 Hatch // PNW Heres a few clips from last weekends Open Drift at Evergreen Speedway https://youtu.be/GEKK1vrpFq0 Sent from my iPhone using Tapatalk __________________ @schassis.eddi