Intercooler + new turbo ca18det ! 350hp - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Pignoises13 · 02-27-2020, 05:58 PM

hello friends, Thanks for the previous answers, I want more advice from you, my goal is 350hp at the flywheel, I already know that the gr2560r cannot go beyond 320hp, too bad because it would have had little turbo lag, I know that the gr2860rs goes up to 350hp (but maybe it sends hot air), maybe I need a gt2871r, I am undecided I have never used these turbines on a ca18det, obviously I want the least possible delay, which turbo do you recommend? trim? A.R?

N.B !!! I am undecided air-air air-water intercooler ?? : Duh: with the air-water Intercooler I would have more air but very fresh = less detonation, normal petrol

engine to be assembled, completely forged new, km 0,: D

Izento · 03-13-2020, 01:52 AM

You won't make 350 with a 2860rs. Go for the GT2871r, it spools up plenty fast. My forged CA18 hits full boost at about 3700 I believe, with my GT2871r with 48 turbine wheel trim and .64 a/r. I recommend the more common 56 trim wheel as it gives you about a 380 whp cap, or so they say. Check out my build thread if you want some more details about building a CA18. https://forums.nicoclub.com/izento-s...70089-150.html

02-27-2020, 05:58 PM	#1
Pignoises13 Join Date: Feb 2020 Location: Italia Age: 28 Posts: 5 Trader Rating: (0) Feedback Score: 0 reviews	Intercooler + new turbo ca18det ! 350hp hello friends, Thanks for the previous answers, I want more advice from you, my goal is 350hp at the flywheel, I already know that the gr2560r cannot go beyond 320hp, too bad because it would have had little turbo lag, I know that the gr2860rs goes up to 350hp (but maybe it sends hot air), maybe I need a gt2871r, I am undecided I have never used these turbines on a ca18det, obviously I want the least possible delay, which turbo do you recommend? trim? A.R? N.B !!! I am undecided air-air air-water intercooler ?? : Duh: with the air-water Intercooler I would have more air but very fresh = less detonation, normal petrol engine to be assembled, completely forged new, km 0,: D

03-13-2020, 01:52 AM	#2
Izento Leaky Injector Join Date: Dec 2008 Location: Los Angeles Posts: 102 Trader Rating: (1) Feedback Score: 1 reviews	You won't make 350 with a 2860rs. Go for the GT2871r, it spools up plenty fast. My forged CA18 hits full boost at about 3700 I believe, with my GT2871r with 48 turbine wheel trim and .64 a/r. I recommend the more common 56 trim wheel as it gives you about a 380 whp cap, or so they say. Check out my build thread if you want some more details about building a CA18. https://forums.nicoclub.com/izento-s...70089-150.html