changing throwout bearing - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

retrograde. · 07-18-2012, 03:36 PM

i ordered a new throwout bearing and release sleeve and pressed them together without putting grease on the part where the throwout bearing sits on the sleeve. do i need to take off the tob and add grease or can i run it as is without grease on the sleeve?

*fliprayzin240sx* · 07-18-2012, 09:05 PM

You dont need to grease the area between the TOB and the carrier. But make sure you grease the inside of the sleeve when you slide it into the output shaft cover, so itll slide properly.

retrograde. · 07-18-2012, 10:07 PM

Quote:

Originally Posted by fliprayzin240sx

You dont need to grease the area between the TOB and the carrier. But make sure you grease the inside of the sleeve when you slide it into the output shaft cover, so itll slide properly.

Cool thanks

07-18-2012, 03:36 PM	#1
retrograde. Leaky Injector Join Date: Dec 2009 Location: bayarea. Posts: 86 Trader Rating: (0) Feedback Score: 0 reviews	changing throwout bearing i ordered a new throwout bearing and release sleeve and pressed them together without putting grease on the part where the throwout bearing sits on the sleeve. do i need to take off the tob and add grease or can i run it as is without grease on the sleeve?

07-18-2012, 09:05 PM	#2
fliprayzin240sx Man w/ CTSV & a Car Seat Join Date: Aug 2002 Location: Tampa Posts: 17,998 Trader Rating: (19) Rides Gallery: fliprayzin240sx Feedback Score: 19 reviews	You dont need to grease the area between the TOB and the carrier. But make sure you grease the inside of the sleeve when you slide it into the output shaft cover, so itll slide properly. __________________ If you think Zilvia has too many assholes... CLICK HERE!!!