ElseaCorps Type X KA-T (Alabama) - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Michael E · 11-18-2013, 08:50 AM

Hey Zilvia I am Michael Elsea, Owner, Founder, and CEO of ElseaCorp. To sum it up at ElseaCorp my interns and I throw together cars in my basement, pretty exciting stuff.

I sold the car a few months ago and just got it back. I plan on making some changes in the next few month to keep this updated.

Enjoy!

When I got it to the house

Fenders already rolled and pulled so that saved me a few hours

After I got the body together and prepped I loaded it up and took it to my current employer to use the booth ( Performance Car Craft )

Did some final sanding at the shop

Ill find a picture of what that vette looks like now, LSX Supercharged.

Michael E · 11-23-2013, 09:36 PM

Fresh out of the booth

Party with the R100

Go pro pic

Michael E · 11-23-2013, 10:01 PM

Sparcos with camlock harnesses

Ran this sr20 for a little while then decided to part out the whole car and start over, not sure why I think I get too bored too easily

Cant remember what that other sr20 short block was for

KA24det crower rods, arias pistons, clevite rod and main bearings, ARP head and main studs with cometic metal head gasket.

I went with the red/orange because I am a Chevrolet guy

All the tabs lined up perfectly, I went with stock cams for this reason.

Took some time but I shaved and polished the valve cover. I hate shaving

Michael E · 11-23-2013, 10:07 PM

Aluminum z brake time!

Gots to have type x tails on a hatch

Hogging the alignment rack

Blow thru maf FTW

Squaat

Michael E · 11-23-2013, 10:26 PM

Had this for a little while

Yes I drive with slicks on the street, nobody cares in Alabama

Got bored again, ae86 is gone and I am currently putting a lsx in this 1969 Camaro. Its going to get modern suspension electronics too

I might do a build thread on the 69 here if its allowed

11-18-2013, 08:50 AM	#1
Michael E Zilvia Member Join Date: Apr 2011 Location: Alabama, U.S.A. Age: 34 Posts: 292 Trader Rating: (5) Feedback Score: 5 reviews	ElseaCorps Type X KA-T (Alabama) Hey Zilvia I am Michael Elsea, Owner, Founder, and CEO of ElseaCorp. To sum it up at ElseaCorp my interns and I throw together cars in my basement, pretty exciting stuff. I sold the car a few months ago and just got it back. I plan on making some changes in the next few month to keep this updated. Enjoy! When I got it to the house Fenders already rolled and pulled so that saved me a few hours After I got the body together and prepped I loaded it up and took it to my current employer to use the booth ( Performance Car Craft ) Did some final sanding at the shop Ill find a picture of what that vette looks like now, LSX Supercharged. __________________ Instagram: @michaelelsea

11-23-2013, 09:36 PM	#2
Michael E Zilvia Member Join Date: Apr 2011 Location: Alabama, U.S.A. Age: 34 Posts: 292 Trader Rating: (5) Feedback Score: 5 reviews	Fresh out of the booth Party with the R100 Go pro pic __________________ Instagram: @michaelelsea

11-23-2013, 10:01 PM	#3
Michael E Zilvia Member Join Date: Apr 2011 Location: Alabama, U.S.A. Age: 34 Posts: 292 Trader Rating: (5) Feedback Score: 5 reviews	Sparcos with camlock harnesses Ran this sr20 for a little while then decided to part out the whole car and start over, not sure why I think I get too bored too easily Cant remember what that other sr20 short block was for KA24det crower rods, arias pistons, clevite rod and main bearings, ARP head and main studs with cometic metal head gasket. I went with the red/orange because I am a Chevrolet guy All the tabs lined up perfectly, I went with stock cams for this reason. Took some time but I shaved and polished the valve cover. I hate shaving __________________ Instagram: @michaelelsea

11-23-2013, 10:07 PM	#4
Michael E Zilvia Member Join Date: Apr 2011 Location: Alabama, U.S.A. Age: 34 Posts: 292 Trader Rating: (5) Feedback Score: 5 reviews	Aluminum z brake time! Gots to have type x tails on a hatch Hogging the alignment rack Blow thru maf FTW Squaat __________________ Instagram: @michaelelsea

11-23-2013, 10:26 PM	#5
Michael E Zilvia Member Join Date: Apr 2011 Location: Alabama, U.S.A. Age: 34 Posts: 292 Trader Rating: (5) Feedback Score: 5 reviews	Had this for a little while Yes I drive with slicks on the street, nobody cares in Alabama Got bored again, ae86 is gone and I am currently putting a lsx in this 1969 Camaro. Its going to get modern suspension electronics too I might do a build thread on the 69 here if its allowed __________________ Instagram: @michaelelsea