****Japanese IMPORT 180SX Build**** - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Chewbaca · 07-25-2012, 01:29 PM

Right well iv been on the hunt for a Nissan SR20DET for a while now as some know and i went through all the phases - s14, 14a, 180sx, s15 back to a 14 and ended up with a 180 lol

I bought this off Steveone a few weeks back with brand new fresh NCT and i got it at a very very good price

. I rathered the idea of buying a nice clean 180 and havin plenty of money to spend on it instead of buying a s15 and havin no money to spend on it. What really sold me about this car is it has genuine milage, proof it was well taken care of in Japan and a rediculously clean shell. It has 165 000kms which are definately genuine and there is no patches of rust anywhere on it. I will have this back up on a lift to take underbody and arch shots to show how stupidly clean this thing is

It started off by layin out side my girlfriend (JDeeM's) house as i had to wait for insurance to come through, i got fed up of it sittin there so it then went out to Dori-Rorys house where it sat for another week but finally today, THE INSURANCE CAME THROUGH so i drove it home

So thats the car as it sits outside my back door.

The first thing i did when i got it was throw on the uras front bumper, i know it is well battered but the car came with the standard front bumper and it was fuckin aweful looking. Next was to rip out the UNBELIEVEABLY SHIT HKS dumpvalve and put back in the standard intercooler pipe. The car runs 210% better without the dumpvalve. There is a lot more power and its very steady going up through the revs where with the dumpvalve the power was all over the place

So anyway, tonight when i came home, i landed home to a bit of a treat.

The first few wee bits and pieces i bought

I thought this was class till i went out side and seen MORE :happy) :happy)

My new Cusco 2way diff

My dash dodger bolt in cage

And I had this laying about aswell

Thats all for today, it was a good day in all fairness

On the way i have a dildo gearknob and checkered mats and hopefull i might be swappin the wheels for sumthing with a little more dish

Updates and more pics to come soon

sharpe_corners · 07-28-2012, 09:30 PM

burn the taillights and carry on

Michaelwinne · 07-29-2012, 09:44 PM

Man I'm sure this dude loves your input. Why even take the time to reply to the thread?

Quote:

Originally Posted by sharpe_corners

burn the taillights and carry on

drscooper · 07-29-2012, 10:03 PM

agree taillights should blow up! but hey its your car what do i know! lol

Nismo11 · 07-29-2012, 10:09 PM

Dang sick car.

Michaelwinne · 07-29-2012, 10:14 PM

I have the same tails and I love them, way better than the bullshit stock ones. I still wouldn't pick them over the kouki tails you had before though what's up with that??

sharpe_corners · 07-29-2012, 10:21 PM

Quote:

Originally Posted by Michaelwinne

Man I'm sure this dude loves your input. Why even take the time to reply to the thread?

Quote:

Originally Posted by Michaelwinne

....... I still wouldn't pick them over the kouki tails you had before though what's up with that??

Taking your own advice, like a boss.

Michaelwinne · 07-29-2012, 10:35 PM

Quote:

Originally Posted by sharpe_corners

Taking your own advice, like a boss.

Umm..that makes no sense..

s0fa king · 07-30-2012, 06:19 AM

hes saying you're being a hypocrite.

Michaelwinne · 07-30-2012, 08:01 AM

Quote:

Originally Posted by s0fa king

hes saying you're being a hypocrite.

Well he is incorrect. Sorry to whore up your thread man nice build!

sharpe_corners · 07-30-2012, 08:55 PM

Chewbaca · 07-31-2012, 01:35 PM

Right well i spent my day off fittin these zenki sidelights to a uras bumper

I think they look alright, bit different, I like them bt

The old seat that is completely fucked - Itl be gettin ripped apart and il prob stick the bride material somewhere. Its still mankin with dirt from the last drift day

The new seat that im currently getting rails for, got this at an UNBELIEVEABLE PRICE thanks to johnny C bt

My two as new cusco coilovers for the back as the two on the back are welded to the high position

and this is the rail off the Bride, i seriously thought this was an oul homemade jobbie before i got it out

Found a few pound down the back of the couch so i went out and bought 20 marlboro and these

SSR PROFESSOR SP1's

Fronts are 17 x 9jj +11
Rears are 18 x 10jj +11

Shes gettin there

Chewbaca · 07-31-2012, 01:37 PM

Well I bought the SSR's in January and in fairness they needed a hell of a refurb, the dishes were very very dead and the paint was falling off everywhere

So this is what they looked like before hand when i got them

I got them off the car and left them up to Marty Coyle (martycturbo) to refurb.

I took as much time off work as i can to go up and lend a hand

Marty got them split and sent the centres away to be sandblasted

I went at the dishes with scotch bright and ended up taking a lot of the ground in dirt off them

At this point i let Marty do his magic

I sat back with a cigarette and bottle of boost and took in the scenery

So after many many hours this is how the dishes ended up

I was unreal happy with the dishes but i couldnt believe my eyes when he got them painted, the colour was perfect and was exactly what i was after. These are the finished article with the studs all shined up and the wheels screwed back together

I also let the BURE do another drawing on my petrol cap

WIN :happy) :happy) :happy)

Chewbaca · 07-31-2012, 01:38 PM

ROLLIN LIKE A BAWWWWSSSSSS

Chewbaca · 07-31-2012, 01:39 PM

Found a few pics on the camera i forgot about

From when we were fitting the cage and heading for a drift day down in eglington

Chewbaca · 07-31-2012, 01:39 PM

pics removed

Chewbaca · 07-31-2012, 01:40 PM

pics removed

Chewbaca · 07-31-2012, 01:43 PM

So thats pretty much it up to date as of today 07-31-2012

The car is going into the garage on sunday morning. il be completely strippin it again and when its in millions of pieces il decide weather to paint the car and rebuild it or reshell it onto a PS13 (ONEVIA)

The shell is mad clean with zero rust but iv always wanted a onevia so i wanna have some time now to think about it

OPINIONS?????

izzy- · 07-31-2012, 02:59 PM

Great build. I saw it on JDM CHICAGO. Rims look great!

Krusty_s13 · 07-31-2012, 05:51 PM

cool build. nice wheels. love the rb wing. but WHY that pull?

funnyscreenname · 07-31-2012, 09:09 PM

damn those wheels came out good. nice work.

usdm180sx · 08-01-2012, 12:13 AM

Rocket Bunny wing look like Porsche ducktail spoiler sooooo sik!! =P

Chewbaca · 08-01-2012, 01:14 AM

Quote:

Originally Posted by Krusty_s13

cool build. nice wheels. love the rb wing. but WHY that pull?

that pull?????

i dont understand?

*ManoNegra* · 08-01-2012, 07:57 AM

He means your rear fenders, and he's right, they don't look very good.
Good choice on staying with the stock tail lights aswell.
Nice car otherwise, wheels came out nice.

Chewbaca · 08-01-2012, 08:12 AM

Quote:

Originally Posted by ManoNegra

He means your rear fenders, and he's right, they don't look very good.
Good choice on staying with the stock tail lights aswell.
Nice car otherwise, wheels came out nice.

Is well and good havin hella flush and stance and all that shit til you actually use the car

Bein ignorant with the rear quarters means this thing can be pushed harder on the track

it aint an ornament

subiesean · 08-01-2012, 09:07 AM

dat purple is awesome love that color on those wheels

subscribed

S13Point5 · 08-01-2012, 07:30 PM

there is to much car porn in this picture. SiR civic. 180sx. and a s2000

spaggettio26 · 08-02-2012, 07:34 AM

Sharp looking car man! Keep it up!!

rangerjavi · 08-02-2012, 06:20 PM

The pull came out awesome.

Chewbaca · 08-03-2012, 08:46 AM

thanks for the comments guys

yeah we have a clique here called the Zero7Four

Il get up a thread of some of our cars

07-25-2012, 01:29 PM	#1
Chewbaca Leaky Injector Join Date: Jul 2012 Location: On the corners Age: 36 Posts: 135 Trader Rating: (0) Feedback Score: 0 reviews	**Japanese IMPORT 180SX Build Right well iv been on the hunt for a Nissan SR20DET for a while now as some know and i went through all the phases - s14, 14a, 180sx, s15 back to a 14 and ended up with a 180 lol I bought this off Steveone a few weeks back with brand new fresh NCT and i got it at a very very good price . I rathered the idea of buying a nice clean 180 and havin plenty of money to spend on it instead of buying a s15 and havin no money to spend on it. What really sold me about this car is it has genuine milage, proof it was well taken care of in Japan and a rediculously clean shell. It has 165 000kms which are definately genuine and there is no patches of rust anywhere on it. I will have this back up on a lift to take underbody and arch shots to show how stupidly clean this thing is It started off by layin out side my girlfriend (JDeeM's) house as i had to wait for insurance to come through, i got fed up of it sittin there so it then went out to Dori-Rorys house where it sat for another week but finally today, THE INSURANCE CAME THROUGH so i drove it home So thats the car as it sits outside my back door. The first thing i did when i got it was throw on the uras front bumper, i know it is well battered but the car came with the standard front bumper and it was fuckin aweful looking. Next was to rip out the UNBELIEVEABLY SHIT HKS dumpvalve and put back in the standard intercooler pipe. The car runs 210% better without the dumpvalve. There is a lot more power and its very steady going up through the revs where with the dumpvalve the power was all over the place So anyway, tonight when i came home, i landed home to a bit of a treat. The first few wee bits and pieces i bought I thought this was class till i went out side and seen MORE** :happy) :happy) My new Cusco 2way diff My dash dodger bolt in cage And I had this laying about aswell Thats all for today, it was a good day in all fairness On the way i have a dildo gearknob and checkered mats and hopefull i might be swappin the wheels for sumthing with a little more dish Updates and more pics to come soon Last edited by Chewbaca; 12-02-2013 at 11:47 AM..

07-31-2012, 01:35 PM	#12
Chewbaca Leaky Injector Join Date: Jul 2012 Location: On the corners Age: 36 Posts: 135 Trader Rating: (0) Feedback Score: 0 reviews	Right well i spent my day off fittin these zenki sidelights to a uras bumper I think they look alright, bit different, I like them bt The old seat that is completely fucked - Itl be gettin ripped apart and il prob stick the bride material somewhere. Its still mankin with dirt from the last drift day The new seat that im currently getting rails for, got this at an UNBELIEVEABLE PRICE thanks to johnny C bt My two as new cusco coilovers for the back as the two on the back are welded to the high position and this is the rail off the Bride, i seriously thought this was an oul homemade jobbie before i got it out Found a few pound down the back of the couch so i went out and bought 20 marlboro and these SSR PROFESSOR SP1's Fronts are 17 x 9jj +11 Rears are 18 x 10jj +11 Shes gettin there Last edited by Chewbaca; 12-02-2013 at 11:53 AM..

07-31-2012, 01:38 PM	#14
Chewbaca Leaky Injector Join Date: Jul 2012 Location: On the corners Age: 36 Posts: 135 Trader Rating: (0) Feedback Score: 0 reviews	ROLLIN LIKE A BAWWWWSSSSSS Last edited by Chewbaca; 12-02-2013 at 11:54 AM..

07-31-2012, 01:39 PM	#16
Chewbaca Leaky Injector Join Date: Jul 2012 Location: On the corners Age: 36 Posts: 135 Trader Rating: (0) Feedback Score: 0 reviews	pics removed Last edited by Chewbaca; 12-02-2013 at 11:43 AM..

07-31-2012, 01:40 PM	#17
Chewbaca Leaky Injector Join Date: Jul 2012 Location: On the corners Age: 36 Posts: 135 Trader Rating: (0) Feedback Score: 0 reviews	pics removed Last edited by Chewbaca; 12-02-2013 at 11:43 AM..

07-29-2012, 10:03 PM	#4
drscooper Zilvia Addict Join Date: Jul 2012 Location: homegrown Posts: 799 Trader Rating: (0) Feedback Score: 0 reviews	agree taillights should blow up! but hey its your car what do i know! lol

07-29-2012, 10:09 PM	#5
Nismo11 Zilvia Addict Join Date: Apr 2012 Location: SGV Posts: 675 Trader Rating: (0) Feedback Score: 0 reviews	Dang sick car.

07-29-2012, 10:14 PM	#6
Michaelwinne Zilvia Junkie Join Date: Dec 2011 Location: Hurlburt Field, Florida Age: 36 Posts: 447 Trader Rating: (12) Feedback Score: 12 reviews	I have the same tails and I love them, way better than the bullshit stock ones. I still wouldn't pick them over the kouki tails you had before though what's up with that??

07-30-2012, 06:19 AM	#9
s0fa king Zilvia Addict Join Date: May 2009 Location: earth Posts: 755 Trader Rating: (7) Feedback Score: 7 reviews	hes saying you're being a hypocrite.

07-31-2012, 01:37 PM	#13
Chewbaca Leaky Injector Join Date: Jul 2012 Location: On the corners Age: 36 Posts: 135 Trader Rating: (0) Feedback Score: 0 reviews	Well I bought the SSR's in January and in fairness they needed a hell of a refurb, the dishes were very very dead and the paint was falling off everywhere So this is what they looked like before hand when i got them I got them off the car and left them up to Marty Coyle (martycturbo) to refurb. I took as much time off work as i can to go up and lend a hand Marty got them split and sent the centres away to be sandblasted I went at the dishes with scotch bright and ended up taking a lot of the ground in dirt off them At this point i let Marty do his magic I sat back with a cigarette and bottle of boost and took in the scenery So after many many hours this is how the dishes ended up I was unreal happy with the dishes but i couldnt believe my eyes when he got them painted, the colour was perfect and was exactly what i was after. These are the finished article with the studs all shined up and the wheels screwed back together I also let the BURE do another drawing on my petrol cap WIN :happy) :happy) :happy)

07-31-2012, 01:43 PM	#18
Chewbaca Leaky Injector Join Date: Jul 2012 Location: On the corners Age: 36 Posts: 135 Trader Rating: (0) Feedback Score: 0 reviews	So thats pretty much it up to date as of today 07-31-2012 The car is going into the garage on sunday morning. il be completely strippin it again and when its in millions of pieces il decide weather to paint the car and rebuild it or reshell it onto a PS13 (ONEVIA) The shell is mad clean with zero rust but iv always wanted a onevia so i wanna have some time now to think about it OPINIONS?????

07-31-2012, 02:59 PM	#19
izzy- Zilvia Member Join Date: Jul 2012 Location: illinois Posts: 291 Trader Rating: (0) Feedback Score: 0 reviews	Great build. I saw it on JDM CHICAGO. Rims look great!

07-31-2012, 05:51 PM	#20
Krusty_s13 Zilvia Addict Join Date: May 2008 Location: Miami, FL Posts: 879 Trader Rating: (0) Feedback Score: 0 reviews	cool build. nice wheels. love the rb wing. but WHY that pull?

07-31-2012, 09:09 PM	#21
funnyscreenname Leaky Injector Join Date: Jul 2012 Location: MS Gulf Coast Age: 38 Posts: 122 Trader Rating: (0) Feedback Score: 0 reviews	damn those wheels came out good. nice work. __________________ I don't really need sex, the government FUCKS me everyday!

08-01-2012, 12:13 AM	#22
usdm180sx Post Whore! Join Date: Dec 2005 Location: 562 Posts: 4,807 Trader Rating: (5) Rides Gallery: usdm180sx Feedback Score: 5 reviews	Rocket Bunny wing look like Porsche ducktail spoiler sooooo sik!! =P __________________ -Norm!

08-01-2012, 07:57 AM	#24
ManoNegra Guild of Skullduggerous Intent Join Date: Jan 2004 Location: Socal Posts: 7,841 Trader Rating: (48) Feedback Score: 48 reviews	He means your rear fenders, and he's right, they don't look very good. Good choice on staying with the stock tail lights aswell. Nice car otherwise, wheels came out nice.

08-01-2012, 09:07 AM	#26
subiesean Zilvia Junkie Join Date: Jun 2011 Location: Chicago, IL Age: 32 Posts: 306 Trader Rating: (0) Feedback Score: 0 reviews	dat purple is awesome love that color on those wheels subscribed __________________ I change cars too often... Ho.Mo.Co.

08-01-2012, 07:30 PM	#27
S13Point5 Join Date: Jun 2005 Location: Ohio Posts: 7 Trader Rating: (0) Feedback Score: 0 reviews	there is to much car porn in this picture. SiR civic. 180sx. and a s2000

08-02-2012, 07:34 AM	#28
spaggettio26 Join Date: May 2011 Location: Wisconsin Age: 35 Posts: 7 Trader Rating: (0) Feedback Score: 0 reviews	Sharp looking car man! Keep it up!!

08-02-2012, 06:20 PM	#29
rangerjavi Zilvia Addict Join Date: May 2011 Location: Lake Wales Posts: 804 Trader Rating: (11) Feedback Score: 11 reviews	The pull came out awesome. __________________ Being a Floridian is a birth right!

08-03-2012, 08:46 AM	#30
Chewbaca Leaky Injector Join Date: Jul 2012 Location: On the corners Age: 36 Posts: 135 Trader Rating: (0) Feedback Score: 0 reviews	thanks for the comments guys yeah we have a clique here called the Zero7Four Il get up a thread of some of our cars