S13 Sr Swap Problem...Wont turn off - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

1slicktwo4oh · 09-05-2011, 12:08 AM

Was up zilvians,
I swapped in an sr into my 92' s13 i turn it on, turns on fine everythings good mechanical wise. When i turn the ign. switch to the off position and take the key out, the engine stays on. Also the dash clocks brightness fluctuates, so im thinking i have a wiring issue but I dont know where to start checking??...CAN NAYONE HLEP!!!....

R@ddy · 09-05-2011, 12:31 AM

All you gotta do is re-pin the harness that goes over by the headlights on the passenger side. Just match colors. You're welcome.

1slicktwo4oh · 09-05-2011, 05:09 PM

i checked my wiring on the front harness and all the connection were right....it turned out that i had an inproper ground on my greddy t.timer. It turns off now, but the brightness of my clusters clock still fluctuates....can anybody help w/ my problem??????

OkiDori17 · 09-06-2011, 11:31 PM

check all your grounds, you might have one loose somewhere else

1slicktwo4oh · 09-07-2011, 12:11 AM

Thanks ....ill check them all, hope it goes away...

09-05-2011, 12:08 AM	#1
1slicktwo4oh Zilvia Addict Join Date: Dec 2010 Location: los angeles Age: 40 Posts: 949 Trader Rating: (45) Feedback Score: 45 reviews	S13 Sr Swap Problem...Wont turn off Was up zilvians, I swapped in an sr into my 92' s13 i turn it on, turns on fine everythings good mechanical wise. When i turn the ign. switch to the off position and take the key out, the engine stays on. Also the dash clocks brightness fluctuates, so im thinking i have a wiring issue but I dont know where to start checking??...CAN NAYONE HLEP!!!....

09-06-2011, 11:31 PM	#4
OkiDori17 Zilvia Junkie Join Date: Jan 2011 Location: Columbus, GA Posts: 373 Trader Rating: (6) Feedback Score: 6 reviews	check all your grounds, you might have one loose somewhere else __________________ '92 240sx w/'93 SR Blacktop /// '94 RX7 FD3S /// '11 370z RIP

09-05-2011, 12:31 AM	#2
R@ddy Nissanaholic! Join Date: Jul 2008 Location: Zacatecas, Mx; Paramount, Ca Age: 34 Posts: 1,628 Trader Rating: (32) Feedback Score: 32 reviews	All you gotta do is re-pin the harness that goes over by the headlights on the passenger side. Just match colors. You're welcome.

09-05-2011, 05:09 PM	#3
1slicktwo4oh Zilvia Addict Join Date: Dec 2010 Location: los angeles Age: 40 Posts: 949 Trader Rating: (45) Feedback Score: 45 reviews	i checked my wiring on the front harness and all the connection were right....it turned out that i had an inproper ground on my greddy t.timer. It turns off now, but the brightness of my clusters clock still fluctuates....can anybody help w/ my problem??????

09-07-2011, 12:11 AM	#5
1slicktwo4oh Zilvia Addict Join Date: Dec 2010 Location: los angeles Age: 40 Posts: 949 Trader Rating: (45) Feedback Score: 45 reviews	Thanks ....ill check them all, hope it goes away...