Bolt in cage Pictures.. - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Eastside DriFto · 05-03-2009, 07:48 AM

There are alot of people talkin about Bolt-in cages ,But where are the pictures...So.Pictures of bolt in cages along with the cages company name and price and any mods you had to make to it..

Post them Up.

kernel · 05-03-2009, 08:04 AM

Cusco 7pts bolt-on roll cage w/ sidebar/harness bar added

I could let the interior trim installed but this a track car

Fitment: Had no issue at all..drill hole where it goes, that's all

Prices: around 1000-1200$ with added bar brand new.

Eastside DriFto · 05-03-2009, 03:07 PM

Nice.. lets see some more..S@w,safty21..Lets go people..

s13dan · 05-03-2009, 03:52 PM

Good thread, i have been considering a bolt in for a while now.

kernel · 05-03-2009, 10:14 PM

Just to let ppl know. The cusco cage shown in my previous post is from a Silvia S13 W/O Sunroof.

It fitted BOLT-ON in my hatchback 180sx, no modification required.

Here's a Safety21, I had this one before I get the silvia cusco cage.

Not much details of the Safety21 but it show that does fit well with all interior trim without major modification.

AnDyStYLe · 10-30-2012, 10:37 PM

Quote:

Originally Posted by kernel

Just to let ppl know. The cusco cage shown in my previous post is from a Silvia S13 W/O Sunroof.

It fitted BOLT-ON in my hatchback 180sx, no modification required.

Here's a Safety21, I had this one before I get the silvia cusco cage.

Not much details of the Safety21 but it show that does fit well with all interior trim without major modification.

Bit of a bump in topic sorry guys

After doing some research, I realised that the 180sx Cusco cages have the same part number for sunroof and non sunroof. Pictures I've seen shows evidence that the 180sx hoops sit further back than the s13 ones, regardless of being a sunroof or non sunroof.

The s13 non sunroof hoop sits closer to the front. However, I'm not sure when it comes to s13 sunroof models.

Question for the OP... Does the s13 and 180sx Cusco hoops bolt into the floor in the exact same position? Seeing as though you have fitted both 180sx and s13 into an 180sx, did you need to drill extra holes in the floor?

I currently have an s13 non sunroof Cusco chromoly 5-point to bolt into my 180sx. However, I would have preferred it to sit further back like the proper 180sx model. Although, if it bolts in the same location I'll fit it up until I can track down a proper 180sx one.

Thanks in advance!

Cheers,

Andy

lflkajfj12123 · 05-03-2009, 11:45 PM

lol is a sub box that big really necessary?

sneakerjunkie · 05-03-2009, 11:49 PM

autopower 6 point in a s14 fyi old pics. it was for the non sunroof model and i bought this from a friend so i had to cut my sunroof rails to make this fit, it deff made the chassis stiffer tho

merlz · 05-04-2009, 02:07 AM

Cusco 5 point half cage. non sunroof model, a sunroof model will sit a bit further back

Spring Break '92 · 05-31-2009, 02:00 AM

Quote:

Originally Posted by merlz

Cusco 5 point half cage. non sunroof model, a sunroof model will sit a bit further back

I have this same cage I bought used and have not installed yet. Is there any way to tell if it is made for sunroof or non-sunroof without test fitting it?

ErocKs13 · 05-04-2009, 03:14 AM

i see that you said that a coupe cage will work in a hatch but will a hatch cage work in a coupe?

kernel · 05-04-2009, 07:10 AM

Quote:

Originally Posted by s0apgun

lol is a sub box that big really necessary?

hahahaha, no it's not there anymore. I had full interior before installing the cusco cage. All the picture taken are while my 2JZ swap so..it's kinda a big mess in it !

Quote:

Originally Posted by ErocKs13

i see that you said that a coupe cage will work in a hatch but will a hatch cage work in a coupe?

I couldn't try it. I sold my coupe before uninstalling the hatcback cage..

I'd take a guess and say yes, my main hoop from my coupe was the same as my hatchback one.

MadMaverick · 05-05-2009, 10:47 AM

Quote:

Originally Posted by ErocKs13

i see that you said that a coupe cage will work in a hatch but will a hatch cage work in a coupe?

I have a hatch cage installed in my coupe. No modification necessary, bolts right in.

Does anybody have pics of an autopower cage in a coupe with the plastics cut to fit?

!Zar! · 05-04-2009, 03:59 AM

Crappy pic but whatever.

Autopower setup I had in one of my cars.

derek_s13 · 05-05-2009, 10:11 AM

i know this is kind of a picture/info request, but while we're on the topic here, does anyone have a picture of a bolt-in cage in an s14 WITH sunroof AND headliner?

cusco seems to only offer s14 bolt-in w/o sunroof. wondering if anyones made it work. but doesn't necessarily have to be cusco. if something's out there thatll fit with all my interior in, i'll consider it.

thanks in advance.

OBEEWON · 05-07-2009, 06:15 AM

Quote:

Originally Posted by derek_s13

i know this is kind of a picture/info request, but while we're on the topic here, does anyone have a picture of a bolt-in cage in an s14 WITH sunroof AND headliner?

cusco seems to only offer s14 bolt-in w/o sunroof. wondering if anyones made it work. but doesn't necessarily have to be cusco. if something's out there thatll fit with all my interior in, i'll consider it.

thanks in advance.

I may have a pic for you soon as the rain stops.

INeedNewTires · 05-05-2009, 10:41 AM

check kirk racing, thats what i use and its by far my fav for design of a cage. installed pics uploaded soon.

Teddy · 05-05-2009, 10:44 AM

Autopower 6 point.

s13dan · 05-05-2009, 10:55 AM

No prices?

Teddy · 05-07-2009, 03:12 AM

Quote:

Originally Posted by s13dan

No prices?

I paid $400.

xplicit240 · 05-05-2009, 10:57 AM

whats the price on the autopower 6 point btw?

cemtoes · 05-05-2009, 11:13 AM

cusco 6point. instead of bolting it in I chose to weld it, yeah.... probably shoulda just done a custom cage :/
Cage was actually for a coupe but went it just fine.

s13dan · 05-05-2009, 03:23 PM

from what i found most autopower cages are 832$ not including shipping.That was just a quick search though.

Odysseus · 05-07-2009, 03:05 AM

I wanna see a cage with FULL interior..

Brian · 05-07-2009, 10:06 AM

I had a Safety21 dash escape 6 point with door bars in my 14. FULL INTERIOR

Safety21 through dash 7 point with door bars. 180sx

Danco29 · 10-06-2009, 03:07 PM

wondering where u picked that Safety21 cage up from, shits dope for a bolt in

Danco29 · 10-06-2009, 03:11 PM

Quote:

Originally Posted by Brian

I had a Safety21 dash escape 6 point with door bars in my 14. FULL INTERIOR

Safety21 through dash 7 point with door bars. 180sx

wondering where u picked that cage up from, shits dope for a bolt in

SuperiorS14 · 10-08-2009, 06:53 PM

i have a 6point saftey21 that im almost done bolting in with full interior.

for all of you who kept your interior, what was the easiest way to line up and cut out the rear panels. thanks in advance.....

Martino · 10-09-2009, 01:19 PM

Quote:

Originally Posted by SuperiorS14

i have a 6point saftey21 that im almost done bolting in with full interior.

for all of you who kept your interior, what was the easiest way to line up and cut out the rear panels. thanks in advance.....

Looking for that answer as well.

Brian · 10-29-2009, 02:25 PM

Quote:

Originally Posted by Martino

Looking for that answer as well.

eyeball it.
It's REALLY nice if you have a spare set of plastics that you can practice on.

From there, a hole saw is pretty nice. 60mm works well.

05-03-2009, 07:48 AM	#1
Eastside DriFto Join Date: Jul 2007 Location: ct Age: 43 Posts: 41 Trader Rating: (0) Feedback Score: 0 reviews	Bolt in cage Pictures.. There are alot of people talkin about Bolt-in cages ,But where are the pictures...So.Pictures of bolt in cages along with the cages company name and price and any mods you had to make to it.. Post them Up.

05-03-2009, 08:04 AM	#2
kernel Zilvia Addict Join Date: Jan 2005 Location: Canada Age: 39 Posts: 934 Trader Rating: (28) Feedback Score: 28 reviews	Cusco 7pts bolt-on roll cage w/ sidebar/harness bar added I could let the interior trim installed but this a track car Fitment: Had no issue at all..drill hole where it goes, that's all Prices: around 1000-1200$ with added bar brand new. Last edited by kernel; 05-03-2009 at 10:00 AM..

05-03-2009, 03:52 PM	#4
s13dan Zilvia FREAK! Join Date: Aug 2003 Location: Springfield, Mo Posts: 1,519 Trader Rating: (2) Feedback Score: 2 reviews	Good thread, i have been considering a bolt in for a while now. __________________ 89 240sx hatch #933-the hot rod 91 240sx coupe #131,603-the daily

05-03-2009, 11:49 PM	#8
sneakerjunkie Zilvia Junkie Join Date: Jan 2007 Location: HELLA norcal Posts: 546 Trader Rating: (1) Feedback Score: 1 reviews	autopower 6 point in a s14 fyi old pics. it was for the non sunroof model and i bought this from a friend so i had to cut my sunroof rails to make this fit, it deff made the chassis stiffer tho __________________

05-04-2009, 03:59 AM	#14
!Zar! Post Whore! Join Date: Nov 2004 Location: North Korea Posts: 14,579 Trader Rating: (27) Feedback Score: 27 reviews	Crappy pic but whatever. Autopower setup I had in one of my cars. __________________

05-03-2009, 03:07 PM	#3
Eastside DriFto Join Date: Jul 2007 Location: ct Age: 43 Posts: 41 Trader Rating: (0) Feedback Score: 0 reviews	Nice.. lets see some more..S@w,safty21..Lets go people..

05-03-2009, 10:14 PM	#5
kernel Zilvia Addict Join Date: Jan 2005 Location: Canada Age: 39 Posts: 934 Trader Rating: (28) Feedback Score: 28 reviews	Just to let ppl know. The cusco cage shown in my previous post is from a Silvia S13 W/O Sunroof. It fitted BOLT-ON in my hatchback 180sx, no modification required. Here's a Safety21, I had this one before I get the silvia cusco cage. Not much details of the Safety21 but it show that does fit well with all interior trim without major modification.

05-03-2009, 11:45 PM	#7
lflkajfj12123 Join Date: Apr 2007 Location: 　　　　　　　　 Posts: 8,483 Trader Rating: (20) Feedback Score: 20 reviews	lol is a sub box that big really necessary?

05-04-2009, 02:07 AM	#9
merlz Zilvia Member Join Date: Jun 2008 Location: Melbourne, Australia Posts: 184 Trader Rating: (0) Feedback Score: 0 reviews	Cusco 5 point half cage. non sunroof model, a sunroof model will sit a bit further back

05-04-2009, 03:14 AM	#11
ErocKs13 Zilvia Member Join Date: Feb 2006 Location: oklahoma Posts: 148 Trader Rating: (0) Feedback Score: 0 reviews	i see that you said that a coupe cage will work in a hatch but will a hatch cage work in a coupe?

05-05-2009, 10:11 AM	#15
derek_s13 Zilvia Addict Join Date: Aug 2005 Location: MA Age: 37 Posts: 733 Trader Rating: (9) Feedback Score: 9 reviews	i know this is kind of a picture/info request, but while we're on the topic here, does anyone have a picture of a bolt-in cage in an s14 WITH sunroof AND headliner? cusco seems to only offer s14 bolt-in w/o sunroof. wondering if anyones made it work. but doesn't necessarily have to be cusco. if something's out there thatll fit with all my interior in, i'll consider it. thanks in advance.

05-05-2009, 10:41 AM	#17
INeedNewTires Zilvia FREAK! Join Date: May 2003 Location: Austin, TX Posts: 1,527 Trader Rating: (4) Rides Gallery: INeedNewTires Feedback Score: 4 reviews	check kirk racing, thats what i use and its by far my fav for design of a cage. installed pics uploaded soon. __________________

05-05-2009, 10:44 AM	#18
Teddy Post Whore! Join Date: Oct 2005 Location: AutoFactory REALIZE Posts: 5,213 Trader Rating: (44) Feedback Score: 44 reviews	Autopower 6 point. __________________ www.realize-jp.net

05-05-2009, 10:55 AM	#19
s13dan Zilvia FREAK! Join Date: Aug 2003 Location: Springfield, Mo Posts: 1,519 Trader Rating: (2) Feedback Score: 2 reviews	No prices? __________________ 89 240sx hatch #933-the hot rod 91 240sx coupe #131,603-the daily

05-05-2009, 10:57 AM	#21
xplicit240 Zilvia Addict Join Date: Oct 2005 Location: Weird NJ! Age: 39 Posts: 723 Trader Rating: (0) Feedback Score: 0 reviews	whats the price on the autopower 6 point btw? __________________

05-05-2009, 11:13 AM	#22
cemtoes Zilvia Junkie Join Date: Jul 2008 Location: Las Vegas, Nevada Age: 35 Posts: 307 Trader Rating: (4) Feedback Score: 4 reviews	cusco 6point. instead of bolting it in I chose to weld it, yeah.... probably shoulda just done a custom cage :/ Cage was actually for a coupe but went it just fine. __________________ get chill.

05-05-2009, 03:23 PM	#23
s13dan Zilvia FREAK! Join Date: Aug 2003 Location: Springfield, Mo Posts: 1,519 Trader Rating: (2) Feedback Score: 2 reviews	from what i found most autopower cages are 832$ not including shipping.That was just a quick search though. __________________ 89 240sx hatch #933-the hot rod 91 240sx coupe #131,603-the daily

05-07-2009, 03:05 AM	#24
Odysseus Zilvia Addict Join Date: Nov 2008 Location: S14 Posts: 640 Trader Rating: (7) Feedback Score: 7 reviews	I wanna see a cage with FULL interior..

05-07-2009, 10:06 AM	#25
Brian Post Whore! Join Date: Jan 2003 Location: usa Posts: 12,840 Trader Rating: (54) Rides Gallery: Brian Feedback Score: 54 reviews	I had a Safety21 dash escape 6 point with door bars in my 14. FULL INTERIOR Safety21 through dash 7 point with door bars. 180sx __________________ http://bhworld.wordpress.com/

10-06-2009, 03:07 PM	#26
Danco29 Join Date: Jun 2007 Location: Bay Area Posts: 14 Trader Rating: (0) Feedback Score: 0 reviews	wondering where u picked that Safety21 cage up from, shits dope for a bolt in

10-08-2009, 06:53 PM	#28
SuperiorS14 Zilvia FREAK! Join Date: Feb 2007 Location: S.G.V. Age: 39 Posts: 1,138 Trader Rating: (20) Feedback Score: 20 reviews	i have a 6point saftey21 that im almost done bolting in with full interior. for all of you who kept your interior, what was the easiest way to line up and cut out the rear panels. thanks in advance.....