650'ish whp JDM legit Z33 build complete - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

blue350zed · 02-05-2013, 01:30 PM

Finally completed the FI build a few months ago. Anyway, here it is:

2007 Nissan 350Z VQ35HR

ENGINE:
GTM Stage-3 TT kit, GT3071R turbos
3.8 liter stroker crank, polished crank
GTM spec rods, Arias pistons
Balanced and blue-printed
Ported and polished heads and lower intake plenum
GTM Stage-5 return fuel system, twin Walbro 255lph pumps, billet filter/fuel rails, Bosch 900cc injectors
AEM FP regulator
HKS plugs
GTM Stage-1 vavletrain upgrade, dual springs, titanium retainers and keepers
GTM performance MAF's
GTM main, rod, and thrust bearings
GTM 3" downpipes
Tial wastegates and blowoff valves
Greddy Turbo Ti-C modified with 3" inlets
Tuned with Osiris UpRev
Tomei cams, 264 in and out
ARP head and main studs
ARC oil filler cap and radiator cap
AAM oil pan spacer
Setrab oil cooler
Cusco oil catch can
Koyo radiator
Samco hoses

DRIVETRAIN:
OS Giken twin plate clutch and flywheel
OS Giken superlok LSD
Heavy duty CSC upgrade
AAM SS clutch line
NISMO cooling fin diff cover
Whiteline rear subframe bushing/traction kit
Whiteline rear diff kit

WHEELS/TIRES/BRAKES:
Mag Blue Volk Racing CE28N 19x9.5 +12 and 19x10.5 +12
Advan Neova AD08 255/35/19 and 295/30/19
Endless Racing R6/R4 BBK
Project Kics R40 lug nuts

SUSPENSION/CHASSIS:
Tein Type Flex coilovers with EDFC
Tein tie rods and tie rod ends
SPL end links front and rear
Cusco 6 point roll cage
Cusco adjustable front upper control arms
Cusco adjustable sway bars
Cusco front strut tower bar

EXTERIOR:
Voltex side skirts
Voltex rear diffuser and underpanel
Voltex Type-II 1500mm wing
Chargespeed front bumper with CF canards
Craftsquare CF mirrors
Seibon CF TS-II hood
Aerocatch flush mount hood pins
LighterFaster bumper diffusers
Benen Ind tow hook ( rear )
Z-speed performance underpanel
Wiper delete front and rear
Painted door handles and emblems

INTERIOR:
Bride blue Zeta-III driver seat
Bride blue XAX-III passenger seat ( not installed yet )
Bride rails
Takata harnesses
Works Bell Rapfix II quick release and hub adaptor
Nardi Deep Corn sued 330mm steering wheel
Defi Advance CR 52mm, boost, water temp, oil temp, oil pressure gauges w/ control box
ATI steering column gauge pod
HKS A/F-Knock amp
HKS EVC-VI boost controller
Enjuku K-bar harness bar
NISMO floor mats
NISMO titanium shift knob
NISMO pedals
Pioneer head unit
Alpine speakers ( stock locations )
JL amp

Sure I missed something, but that's the majority of it.

slowjvms · 02-05-2013, 01:34 PM

Nicely done.

PrimeDirective · 02-05-2013, 01:34 PM

dear lord...nice car, wrong section though.

Flicktitty · 02-05-2013, 04:20 PM

Gorgeous!

Well done!

blue350zed · 02-05-2013, 06:40 PM

Quote:

Originally Posted by PrimeDirective

dear lord...nice car, wrong section though.

Z Chassis...right? Apologize if it's in the wrong spot.

BossHogg · 03-24-2013, 12:25 AM

Very nice. Clean taste.

OrangeVirus1 · 03-24-2013, 12:26 AM

omfg beautiful. just completely beautiful.

Matthew Murphy · 04-19-2013, 09:34 AM

How much hp is that motor pushing out

sharpe_corners · 04-19-2013, 09:42 AM

^you clicked the title to enter the thread. What are the first few words?

smokescreen240 · 05-01-2013, 12:20 PM

beautifuly done!

Edwin562 · 05-01-2013, 12:37 PM

Done right.

cjack300zx · 05-02-2013, 04:52 PM

Wow absolutely amazing!

bigdnno98 · 05-10-2013, 10:29 AM

Definitely a lot of money spent on quality parts. This was def done correctly. Great Work.

staykasaurus · 07-06-2013, 06:30 PM

This car needs more attention! What website has Z discussions poppin, this can't be it.

PoorMans180SX · 07-09-2013, 06:31 AM

I wasn't expecting anything nearly this cool when I clicked on the thread. Nicely done. Do you have a dyno graph?

blue350zed · 08-21-2013, 01:14 AM

Quote:

Originally Posted by staykasaurus

This car needs more attention! What website has Z discussions poppin, this can't be it.

It's all over my350zdotcom!

Quote:

Originally Posted by PoorMans180SX

I wasn't expecting anything nearly this cool when I clicked on the thread. Nicely done. Do you have a dyno graph?

The only dyno graph I've got was when it was tuned at 13psi on a Mustang Dyno. At that point it was putting down 620whp. It's now tuned to 15psi and I'm plannning on putting it on a DynoJet next month. I'll get the graph up once I get it done.

YML-Z33 · 10-18-2013, 10:26 PM

What would you call that roll cage I want one exactly like that in my Z

BossHogg · 10-22-2013, 12:02 AM

Quote:

Originally Posted by YML-Z33

What would you call that roll cage I want one exactly like that in my Z

did you read his mod list? Enjuku "k" harness bar....which is a graffiti motorsports "k" harness bar. With a cucso roll cage.

http://zilvia.net/f/interior-exterio...ars-stock.html

Prok0 · 10-22-2013, 09:10 AM

Super nice Z! Love the CE's

TWest · 10-22-2013, 07:11 PM

Someone get this guy a magazine feature

AVmagneticZ · 10-22-2013, 07:38 PM

damn thats how you build a car. whats your username on my350z?

blue350zed · 10-30-2013, 06:22 AM

Quote:

Originally Posted by BossHogg

did you read his mod list? Enjuku "k" harness bar....which is a graffiti motorsports "k" harness bar. With a cucso roll cage.

http://zilvia.net/f/interior-exterio...ars-stock.html

That's correct!

Quote:

Originally Posted by AVmagneticZ

damn thats how you build a car. whats your username on my350z?

Same as it is on here, AV!

blue350zed · 10-30-2013, 06:26 AM

Sold my Bride seats a last month and the Takata Race-4 harnesses. Bought some Takata bucket seats and black Takata Drift-II harnesses. Look much better. Had to have some side mounts fabricated to get the seats to fit properly. I believe they're done now, but I won't get back home until next week. I'll try to get some pics up when I get 'em in.

double zero · 10-30-2013, 10:24 AM

so all that money and just at 650whp?? are u going to up the boost like 20psi or more??

blue350zed · 11-14-2013, 07:17 AM

Quote:

Originally Posted by double zero

so all that money and just at 650whp?? are u going to up the boost like 20psi or more??

Hadn't planned on it, unless I just get the urge to see what it'll do on a dyno. Even with the 295 AD08's it breaks loose when you get on it. Most of the time I only run around on wastegates at 5 psi or the 10 psi setting.

02-05-2013, 01:30 PM	#1
blue350zed Join Date: Feb 2012 Location: NW FL Posts: 22 Trader Rating: (0) Feedback Score: 0 reviews	650'ish whp JDM legit Z33 build complete Finally completed the FI build a few months ago. Anyway, here it is: 2007 Nissan 350Z VQ35HR ENGINE: GTM Stage-3 TT kit, GT3071R turbos 3.8 liter stroker crank, polished crank GTM spec rods, Arias pistons Balanced and blue-printed Ported and polished heads and lower intake plenum GTM Stage-5 return fuel system, twin Walbro 255lph pumps, billet filter/fuel rails, Bosch 900cc injectors AEM FP regulator HKS plugs GTM Stage-1 vavletrain upgrade, dual springs, titanium retainers and keepers GTM performance MAF's GTM main, rod, and thrust bearings GTM 3" downpipes Tial wastegates and blowoff valves Greddy Turbo Ti-C modified with 3" inlets Tuned with Osiris UpRev Tomei cams, 264 in and out ARP head and main studs ARC oil filler cap and radiator cap AAM oil pan spacer Setrab oil cooler Cusco oil catch can Koyo radiator Samco hoses DRIVETRAIN: OS Giken twin plate clutch and flywheel OS Giken superlok LSD Heavy duty CSC upgrade AAM SS clutch line NISMO cooling fin diff cover Whiteline rear subframe bushing/traction kit Whiteline rear diff kit WHEELS/TIRES/BRAKES: Mag Blue Volk Racing CE28N 19x9.5 +12 and 19x10.5 +12 Advan Neova AD08 255/35/19 and 295/30/19 Endless Racing R6/R4 BBK Project Kics R40 lug nuts SUSPENSION/CHASSIS: Tein Type Flex coilovers with EDFC Tein tie rods and tie rod ends SPL end links front and rear Cusco 6 point roll cage Cusco adjustable front upper control arms Cusco adjustable sway bars Cusco front strut tower bar EXTERIOR: Voltex side skirts Voltex rear diffuser and underpanel Voltex Type-II 1500mm wing Chargespeed front bumper with CF canards Craftsquare CF mirrors Seibon CF TS-II hood Aerocatch flush mount hood pins LighterFaster bumper diffusers Benen Ind tow hook ( rear ) Z-speed performance underpanel Wiper delete front and rear Painted door handles and emblems INTERIOR: Bride blue Zeta-III driver seat Bride blue XAX-III passenger seat ( not installed yet ) Bride rails Takata harnesses Works Bell Rapfix II quick release and hub adaptor Nardi Deep Corn sued 330mm steering wheel Defi Advance CR 52mm, boost, water temp, oil temp, oil pressure gauges w/ control box ATI steering column gauge pod HKS A/F-Knock amp HKS EVC-VI boost controller Enjuku K-bar harness bar NISMO floor mats NISMO titanium shift knob NISMO pedals Pioneer head unit Alpine speakers ( stock locations ) JL amp Sure I missed something, but that's the majority of it.

02-05-2013, 04:20 PM	#4
Flicktitty Post Whore! Join Date: Apr 2007 Location: Wisconsin Age: 37 Posts: 3,685 Trader Rating: (13) Feedback Score: 13 reviews	Gorgeous! Well done! __________________ 2JZ-GTE Swapped S13 Coupe - 1994 Supra Turbo

03-24-2013, 12:25 AM	#6
BossHogg Zilvia Addict Join Date: Aug 2011 Location: america Posts: 998 Trader Rating: (16) Feedback Score: 16 reviews	Very nice. Clean taste. __________________

05-01-2013, 12:20 PM	#10
smokescreen240 Zilvia Junkie Join Date: Dec 2011 Location: Hampton VA Age: 33 Posts: 417 Trader Rating: (1) Feedback Score: 1 reviews	beautifuly done! __________________ (*≧▽≦)

07-06-2013, 06:30 PM	#14
staykasaurus Leaky Injector Join Date: May 2013 Location: Fairfield, CA. Age: 34 Posts: 66 Trader Rating: (0) Feedback Score: 0 reviews	This car needs more attention! What website has Z discussions poppin, this can't be it. __________________ "Rimmed up? That's gangster."

02-05-2013, 01:34 PM	#2
slowjvms Zilvia Addict Join Date: May 2012 Location: West Covina, CA. Posts: 978 Trader Rating: (10) Feedback Score: 10 reviews	Nicely done.

02-05-2013, 01:34 PM	#3
PrimeDirective Zilvia Member Join Date: Jan 2012 Location: Olympia WA Age: 36 Posts: 266 Trader Rating: (3) Feedback Score: 3 reviews	dear lord...nice car, wrong section though.

03-24-2013, 12:26 AM	#7
OrangeVirus1 BANNED Join Date: Jan 2013 Location: PyongYang DPRK-N. Korea, Province 2 Posts: 1,236 Trader Rating: (0) Feedback Score: 0 reviews	omfg beautiful. just completely beautiful.

04-19-2013, 09:34 AM	#8
Matthew Murphy Leaky Injector Join Date: Jan 2011 Location: houston Age: 32 Posts: 87 Trader Rating: (0) Feedback Score: 0 reviews	How much hp is that motor pushing out

05-01-2013, 12:37 PM	#11
Edwin562 Post Whore! Join Date: Nov 2009 Location: Whittier (562) Age: 34 Posts: 4,721 Trader Rating: (35) Feedback Score: 35 reviews	Done right.

05-02-2013, 04:52 PM	#12
cjack300zx Join Date: Mar 2011 Location: roanoke va Posts: 21 Trader Rating: (1) Feedback Score: 1 reviews	Wow absolutely amazing!

05-10-2013, 10:29 AM	#13
bigdnno98 Join Date: May 2013 Location: Clarksville, TN Posts: 39 Trader Rating: (0) Feedback Score: 0 reviews	Definitely a lot of money spent on quality parts. This was def done correctly. Great Work.

07-09-2013, 06:31 AM	#15
PoorMans180SX Zilvia.net Advertiser Join Date: Nov 2005 Location: Michigan Age: 36 Posts: 5,573 Trader Rating: (16) Rides Gallery: PoorMans180SX Feedback Score: 16 reviews	I wasn't expecting anything nearly this cool when I clicked on the thread. Nicely done. Do you have a dyno graph? __________________ Build: http://zilvia.net/f/showthread.php?t=643065 Friends don't let friends buy knock-offs.

10-18-2013, 10:26 PM	#17
YML-Z33 Join Date: Oct 2013 Location: Hanford Ca Age: 32 Posts: 5 Trader Rating: (0) Feedback Score: 0 reviews	What would you call that roll cage I want one exactly like that in my Z

10-22-2013, 09:10 AM	#19
Prok0 Zilvia Junkie Join Date: Apr 2003 Location: FL Age: 37 Posts: 376 Trader Rating: (0) Feedback Score: 0 reviews	Super nice Z! Love the CE's __________________ Sales @ Enjuku email:[email protected] phone:352-241-8399

10-22-2013, 07:11 PM	#20
TWest Leaky Injector Join Date: Apr 2012 Location: Las Vegas Posts: 105 Trader Rating: (0) Feedback Score: 0 reviews	Someone get this guy a magazine feature

10-22-2013, 07:38 PM	#21
AVmagneticZ Zilvia Member Join Date: Jun 2009 Location: Toronto, Canada Age: 36 Posts: 161 Trader Rating: (2) Feedback Score: 2 reviews	damn thats how you build a car. whats your username on my350z?

10-30-2013, 06:26 AM	#23
blue350zed Join Date: Feb 2012 Location: NW FL Posts: 22 Trader Rating: (0) Feedback Score: 0 reviews	Sold my Bride seats a last month and the Takata Race-4 harnesses. Bought some Takata bucket seats and black Takata Drift-II harnesses. Look much better. Had to have some side mounts fabricated to get the seats to fit properly. I believe they're done now, but I won't get back home until next week. I'll try to get some pics up when I get 'em in.

10-30-2013, 10:24 AM	#24
double zero Zilvia Member Join Date: Sep 2013 Location: madtown Age: 41 Posts: 185 Trader Rating: (0) Feedback Score: 0 reviews	so all that money and just at 650whp?? are u going to up the boost like 20psi or more?? __________________ Iam here for the free ethanol!