S13 - S14 Rear Subframe Offset Solid Bushing Install - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

sentradude · 08-28-2018, 10:00 AM

How many of you have done the S14 rear subframe into S13 swap? Being a perfectionist I may be overthinking this but I didn't get the bushings pressed in with perfect alignment so it took some finessing and a jack to get the S14 subframe back on the four studs.. Is this going to cause any issues? Do I need to remove the offset bushings and re-align them so that the subframe goes up easily without getting caught on the studs? Thanks in advance.

TheRealSy90 · 08-28-2018, 05:29 PM

If you got the subframe fully seated against the chassis it is fine. If there's still a gap you should drop it and re-do it.

sentradude · 08-28-2018, 05:48 PM

Quote:

Originally Posted by TheRealSy90

If you got the subframe fully seated against the chassis it is fine. If there's still a gap you should drop it and re-do it.

THX! Its all the way up nice and snug. I appreciate it - now I have a peace of mind to move forward.

08-28-2018, 10:00 AM	#1
sentradude Zilvia Addict Join Date: Jul 2012 Location: California Age: 41 Posts: 740 Trader Rating: (14) Feedback Score: 14 reviews	S13 - S14 Rear Subframe Offset Solid Bushing Install How many of you have done the S14 rear subframe into S13 swap? Being a perfectionist I may be overthinking this but I didn't get the bushings pressed in with perfect alignment so it took some finessing and a jack to get the S14 subframe back on the four studs.. Is this going to cause any issues? Do I need to remove the offset bushings and re-align them so that the subframe goes up easily without getting caught on the studs? Thanks in advance.