CA (CDN) Haltech Sprint 500 w/complete SR harness - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

KingSpence · 12-12-2014, 07:03 PM

After three years I decided to ditch the SR in the ae86 and go with a 1uz. I was on the fence whether or not to keep the Haltech for the 1uz, but have found a complete Megasquirt 2 setup locally, so I've decided to go that route. I hope I don't regret it. The Haltech is amazingly user friendly, and one of the best for tuning.

What's included? Everything you need for a turn key, running SR20det. ECU, IAT sensor, and the complete wiring loom. I'll have exactly which wires labelled that need constant/switched 12v, and with those hooked up that's everything you'll need. All the hard work has been done for you. the harness was built at Independent Speed in Langley, they put out some of the nicest cars on the west coast.

The ECU has two dyno tunes on it. One of which puts down 300whp on 11.5psi with SARD 550cc injectors and a GT2860rs, and the other puts down 355hp/298tq on 14psi with a tomei m7960, SARD 550cc injectors and BC 264 cams.

If you are interested in the 550cc SARD injectors, those are available as well.

$850.

$650 ecu only

$1100 with injectors.

-------

KingSpence · 01-09-2015, 01:38 PM

Bump I cut down my prices a fair bit.

jdm4now · 01-12-2015, 01:56 PM

How much w/o injectors shipped to 78216?

12-12-2014, 07:03 PM	#1
KingSpence Join Date: Feb 2012 Location: Edmonton, AB Age: 33 Posts: 30 Trader Rating: (0) Feedback Score: 0 reviews	(CDN) Haltech Sprint 500 w/complete SR harness After three years I decided to ditch the SR in the ae86 and go with a 1uz. I was on the fence whether or not to keep the Haltech for the 1uz, but have found a complete Megasquirt 2 setup locally, so I've decided to go that route. I hope I don't regret it. The Haltech is amazingly user friendly, and one of the best for tuning. What's included? Everything you need for a turn key, running SR20det. ECU, IAT sensor, and the complete wiring loom. I'll have exactly which wires labelled that need constant/switched 12v, and with those hooked up that's everything you'll need. All the hard work has been done for you. the harness was built at Independent Speed in Langley, they put out some of the nicest cars on the west coast. The ECU has two dyno tunes on it. One of which puts down 300whp on 11.5psi with SARD 550cc injectors and a GT2860rs, and the other puts down 355hp/298tq on 14psi with a tomei m7960, SARD 550cc injectors and BC 264 cams. If you are interested in the 550cc SARD injectors, those are available as well. $850. $650 ecu only $1100 with injectors. ------- Last edited by KingSpence; 01-09-2015 at 01:37 PM..

01-09-2015, 01:38 PM	#2
KingSpence Join Date: Feb 2012 Location: Edmonton, AB Age: 33 Posts: 30 Trader Rating: (0) Feedback Score: 0 reviews	Bump I cut down my prices a fair bit.

01-12-2015, 01:56 PM	#3
jdm4now Join Date: Dec 2012 Location: Texas Posts: 26 Trader Rating: (0) Feedback Score: 0 reviews	How much w/o injectors shipped to 78216?