I need some ka24de help - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

xAy0Bryan · 06-02-2015, 10:03 AM

Okay so I just recently bought a 93' 240SX coupe for $1500.
In order for me to get the car running and started, I need to set the ignition timing. But the motor will not crank fast enough to keep the car in idle and I need it to idle so I can get ignition timing.
What do I do?!

kane01 · 08-01-2015, 03:41 PM

Get anywhere with this problem yet?

supasan · 08-04-2015, 01:33 AM

Pull the valve cover and timing cover off and make sure the chain link marks are lined up at tdc. Then set the distributor to #1 spark. That should get the timing as close as possible if not dead on 20°

Sent from my Z970 using Tapatalk

06-02-2015, 10:03 AM	#1
xAy0Bryan Join Date: Jun 2015 Location: Massachusetts Posts: 1 Trader Rating: (0) Feedback Score: 0 reviews	I need some ka24de help Okay so I just recently bought a 93' 240SX coupe for $1500. In order for me to get the car running and started, I need to set the ignition timing. But the motor will not crank fast enough to keep the car in idle and I need it to idle so I can get ignition timing. What do I do?!

08-01-2015, 03:41 PM	#2
kane01 Join Date: Jul 2015 Location: Mid Mo. Age: 50 Posts: 32 Trader Rating: (0) Feedback Score: 0 reviews	Get anywhere with this problem yet?

08-04-2015, 01:33 AM	#3
supasan Leaky Injector Join Date: Feb 2013 Location: sacramento Ca Age: 32 Posts: 78 Trader Rating: (0) Feedback Score: 0 reviews	Pull the valve cover and timing cover off and make sure the chain link marks are lined up at tdc. Then set the distributor to #1 spark. That should get the timing as close as possible if not dead on 20° Sent from my Z970 using Tapatalk