IL FS/FT Risky Devil SR-E30 Caged Vert - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

ill roller · 01-20-2014, 01:03 AM

After about a year of sitting waiting on some motor work I've decided to sell this thing so I can focus on other projects... I'd like to sell it as a rolling chassis as I've already got my motor out being worked on, but for $2,000 extra I can sell it as a running car with a stock S13 SR. Pretty much everything on the car is new or like new, and I have receipts for most of the parts/labor.The exterior could use some paint (or at least a really good wetsand/buff), but the car is mint and rust free everywhere else. It's a 1989 BMW 325ic with about 180k miles on the chassis. All the swap and fab work was done by TF Works and everything has been tested and proven over 2 seasons of events... This car will be plug and play for an SR swap. Drop in a working motor/trans and go.

$7000 obo for rolling chassis without SR swap parts (no engine harness, mounts, driveshaft, intercooler and piping, exhaust, etc.)
$9000 obo for rolling chassis as is
$11000 obo as a running/driving car with mostly stock SR

Car does not come with the Equip 01's pictured!

I'm also willing to trade for an S13 coupe running or roller plus cash... Don't bother offering me anything else.

PM me or email me at [email protected]

Megan Racing motor/trans mounts
Custom motor and trans mount brackets
Partially wire tucked harness
Powered By Max s13 midmount intercooler kit (w/ piping) modified to fit
Koyo s13 radiator modified to fit
Custom radiator overflow tank
Nissan Altima electric fans
DIF fan controller
Dakota digital converter
Battery relocated to trunk
Earls AN fuel lines
Earls inline fuel filter
Earls AN powersteering lines
Custom 3in turboback exhaust with flex joints and slip fittings
Driveshaft Shop custom one piece driveshaft
Welded 4.10 diff from a 318ci (stock is 3.70 I believe)
AKG poly rear subframe bushings
AKG weld on rear camber links
Stance custom one-off one piece rear coilovers
Ground Control weld-on front coilovers with camber plates
New front wheel bearings
XXR 002 in 15x8 +0
205/50/15 Advan AD08 front tires
205/50/15 Dunlop DZ101 rear tires
Treehouse Racing lollipop bushings
New E46 inner and outer tie rods
New Lemforder front control arms with bushings
Z3 steering rack
Solid steering knuckle (forgot the brand)
Custom lowered steering column
Massive brake booster delete kit
ABS deleted
All stainless steel brake lines
Wilwood brake proportioning valve
CNC hydro e-brake
MOMO steering wheel hub
NRG quick release
MOMO 330 steering wheel
Buddy Club bucket seats
Teamtech silver 4 point harnesses
Mild interior wire tuck (still a little cluttered under the dash)
TF Works full cage with a pillar gussets and door bars welded to chassis
Custom weld-in floor mounted seat brackets made by TF Works
Full interior painted BMW alpine white
Engine bay shaved and painted BMW alpine white
Top replaced with brand new OEM soft top within the last 5k miles
Coupe trunk
DTM mirrors
Converted to plastic bumpers front and rear
Volvo front lip
AC Schnitzer side skirts
I have a Zender rear lip, but it broke in half at the last event
Depo red/clear tails
Euro projector headlights w/ HID's

Spare parts that would be included if sold at the asking price:

Zender front lip
mk3 golf front lip
BMP front bumper
Extra bumper skins
Mint stock rear subframe
All red OE tail lights
Extra interior panels
Extra SR gaskets/stock manifolds/random parts
Full set of 15x8 +10 Basset steelies
Full set of 15x8 +0 Sportmaxx wheels

Motor setup that could be installed:

S13 redtop SR
Stock ECU
Stock MAF
T25 turbo
ISIS exhaust manifold
Apexi air filter
Greddy type s BOV

Pictures are through various stages of the build, I'll get the car cleaned up and post some pictures of it as it sits asap

Video:

JUNKHOUSE dday40 - YouTube

JUNKHOUSE dday4zero - YouTube

http://www.youtube.com/watch?v=Fatq8...ature=youtu.be

keada714 · 01-20-2014, 01:36 AM

Really digging your car. Good luck on the sale.

qt_240 · 01-20-2014, 06:22 AM

Worth every dollar!

Mighty Mouse · 01-20-2014, 11:49 AM

sick car man!

*brndck* · 01-20-2014, 12:25 PM

Now THIS is how you party. Glws AJ.

rb27dets14 · 01-20-2014, 05:53 PM

Quote:

Originally Posted by brndck

Now THIS is how you party. Glws AJ.

I party......only one of us can party

sidewaysil80 · 01-20-2014, 06:10 PM

Not my style, but props for breaking the mold. Additionally, the overflow and catch can "tanks" are the greatest things since pants with pockets.

TurboStrong · 01-20-2014, 06:21 PM

Dude those viedos are on parr!!! You get mad sideways!

xBtony · 01-20-2014, 08:55 PM

Always been a fan of this car. Free bump.

Teckadmics · 01-21-2014, 09:54 AM

Glws man clean e30 and nice rocket bunny s13

dudermagee · 01-21-2014, 11:23 AM

Nice fucking ride
glws

KevinEdgar · 01-28-2014, 10:12 AM

Bump for sick ass e30

01-20-2014, 01:03 AM	#1
ill roller Leaky Injector Join Date: Sep 2007 Location: Chi tizzle Posts: 62 Trader Rating: (0) Feedback Score: 0 reviews	FS/FT Risky Devil SR-E30 Caged Vert After about a year of sitting waiting on some motor work I've decided to sell this thing so I can focus on other projects... I'd like to sell it as a rolling chassis as I've already got my motor out being worked on, but for $2,000 extra I can sell it as a running car with a stock S13 SR. Pretty much everything on the car is new or like new, and I have receipts for most of the parts/labor.The exterior could use some paint (or at least a really good wetsand/buff), but the car is mint and rust free everywhere else. It's a 1989 BMW 325ic with about 180k miles on the chassis. All the swap and fab work was done by TF Works and everything has been tested and proven over 2 seasons of events... This car will be plug and play for an SR swap. Drop in a working motor/trans and go. $7000 obo for rolling chassis without SR swap parts (no engine harness, mounts, driveshaft, intercooler and piping, exhaust, etc.) $9000 obo for rolling chassis as is $11000 obo as a running/driving car with mostly stock SR Car does not come with the Equip 01's pictured! I'm also willing to trade for an S13 coupe running or roller plus cash... Don't bother offering me anything else. PM me or email me at [email protected] Megan Racing motor/trans mounts Custom motor and trans mount brackets Partially wire tucked harness Powered By Max s13 midmount intercooler kit (w/ piping) modified to fit Koyo s13 radiator modified to fit Custom radiator overflow tank Nissan Altima electric fans DIF fan controller Dakota digital converter Battery relocated to trunk Earls AN fuel lines Earls inline fuel filter Earls AN powersteering lines Custom 3in turboback exhaust with flex joints and slip fittings Driveshaft Shop custom one piece driveshaft Welded 4.10 diff from a 318ci (stock is 3.70 I believe) AKG poly rear subframe bushings AKG weld on rear camber links Stance custom one-off one piece rear coilovers Ground Control weld-on front coilovers with camber plates New front wheel bearings XXR 002 in 15x8 +0 205/50/15 Advan AD08 front tires 205/50/15 Dunlop DZ101 rear tires Treehouse Racing lollipop bushings New E46 inner and outer tie rods New Lemforder front control arms with bushings Z3 steering rack Solid steering knuckle (forgot the brand) Custom lowered steering column Massive brake booster delete kit ABS deleted All stainless steel brake lines Wilwood brake proportioning valve CNC hydro e-brake MOMO steering wheel hub NRG quick release MOMO 330 steering wheel Buddy Club bucket seats Teamtech silver 4 point harnesses Mild interior wire tuck (still a little cluttered under the dash) TF Works full cage with a pillar gussets and door bars welded to chassis Custom weld-in floor mounted seat brackets made by TF Works Full interior painted BMW alpine white Engine bay shaved and painted BMW alpine white Top replaced with brand new OEM soft top within the last 5k miles Coupe trunk DTM mirrors Converted to plastic bumpers front and rear Volvo front lip AC Schnitzer side skirts I have a Zender rear lip, but it broke in half at the last event Depo red/clear tails Euro projector headlights w/ HID's Spare parts that would be included if sold at the asking price: Zender front lip mk3 golf front lip BMP front bumper Extra bumper skins Mint stock rear subframe All red OE tail lights Extra interior panels Extra SR gaskets/stock manifolds/random parts Full set of 15x8 +10 Basset steelies Full set of 15x8 +0 Sportmaxx wheels Motor setup that could be installed: S13 redtop SR Stock ECU Stock MAF T25 turbo ISIS exhaust manifold Apexi air filter Greddy type s BOV Pictures are through various stages of the build, I'll get the car cleaned up and post some pictures of it as it sits asap Video: JUNKHOUSE dday40 - YouTube JUNKHOUSE dday4zero - YouTube http://www.youtube.com/watch?v=Fatq8...ature=youtu.be __________________ RISKY DEVIL Last edited by ill roller; 01-28-2014 at 12:35 PM..

01-20-2014, 06:22 AM	#3
qt_240 Nissanaholic! Join Date: Jan 2005 Location: CHI Posts: 2,122 Trader Rating: (3) Feedback Score: 3 reviews	Worth every dollar! __________________ Dorimonster.blogspot.com

01-20-2014, 06:21 PM	#8
TurboStrong Nissanaholic! Join Date: Jun 2008 Location: L.A Posts: 1,707 Trader Rating: (21) Feedback Score: 21 reviews	Dude those viedos are on parr!!! You get mad sideways! __________________

01-28-2014, 10:12 AM	#12
KevinEdgar Zilvia FREAK! Join Date: Jan 2011 Location: osaka, japan Posts: 1,176 Trader Rating: (19) Feedback Score: 19 reviews	Bump for sick ass e30 __________________ http://milktea-man.com

01-20-2014, 01:36 AM	#2
keada714 Zilvia Junkie Join Date: Apr 2010 Location: Los Angeles Posts: 493 Trader Rating: (17) Feedback Score: 17 reviews	Really digging your car. Good luck on the sale.

01-20-2014, 11:49 AM	#4
Mighty Mouse Join Date: Dec 2011 Location: NH Posts: 19 Trader Rating: (0) Feedback Score: 0 reviews	sick car man!

01-20-2014, 06:10 PM	#7
sidewaysil80 Nissanaholic! Join Date: Jun 2008 Location: NoVA Age: 37 Posts: 1,711 Trader Rating: (23) Feedback Score: 23 reviews	Not my style, but props for breaking the mold. Additionally, the overflow and catch can "tanks" are the greatest things since pants with pockets.

01-21-2014, 09:54 AM	#10
Teckadmics Join Date: Apr 2012 Location: Hell Posts: 2 Trader Rating: (0) Feedback Score: 0 reviews	Glws man clean e30 and nice rocket bunny s13