|
|
|||||||
| For Sale Items Post items for sale here. ABSOLUTELY NO COMMERCIAL SALES. |
 |
|
|
Thread Tools | Display Modes |
08-24-2015, 10:04 PM
|
#1 |
|
Post Whore!
 
Join Date: Jul 2007
Location: Simi Valley, CA
Age: 41
Posts: 9,006
Trader Rating: (106)
  Feedback Score: 106 reviews
|
Garage cleanout! Exhaust, BOV, Intake, Silvia, Accessories, MORE!
SOHC Injen intake
This is a COMPLETE Injen intake system for a SOHC KA. EVERYTHING you need is included, just bolt it in and go. Also included is a custom bracket if you do not have the stock fan shroud. You would need to get a rubber mounting bushing or put together a spacer arrangement to mount the bracket though as I re-used the mount bushing on my dualcam intake. $60  KADE Unorthodox Racing pulley w/belts This is an Unorthodox Racing crank pulley for any DUALCAM KA. The pulley's in great shape, it's just too aggressive for my car. Also included are the alternator and power steering belts, which are shorter than the stock belts. The belts are nearly new gates belts, only used for 1-2K miles. The pulley has a steel sleeve around where the crank seal rides so it won't wear and leak. The pulley has been painted black, originally silver. SOLD! Cone filter w/MAF adapter This is a K&N style oiled air filter with the MAF adapter for ANY S13 with a stock MAF sensor. The filter is pretty dirty and needs to be cleaned and oiled, but is in good shape, no damage. The adapter is good quality cast aluminum and has the port for the air injection, if you wanted to keep that. It does not have the port for the intake temp sensor, so it's not quite right for a SOHC KA. $20  SOHC TPS This is a TPS sensor off a SOHC KA. The sensor was replaced only a year or two ago and it is an OE sensor. SOLD! S13 GP Sports style sideskirts This is a pair of KNOCKOFF GP Sports S13 sideskirts. The skirts have never been mounted. One skirt was slightly damaged while in storage. $40   S13 Silvia front bumper This is a complete S13 silvia front bumper with the foam, lights, and all brackets. The bumper is scuffed up and the paint is peeling, but it is not cracked or warped and the scuffs are not deep. All in all it's a pretty clean bumper. $75     S13 Silvia triple projector headlights This is a pair of S13 Silvia triple projector headlights. The lenses are clean and they have no broken tabs. One light is complete, including the subharness, which is rare anymore. The other light is missing the harness and a couple of the boots for the lights. The boots and clips are not very hard to source. $180   S13/14/15 passenger's side Buddy Club seat rail This is a Buddy Club super low seat rail for any S-chasis. This is the PASSENGER'S SIDE and is for a side-mount seat. The rail is in good shape, no issues. $75   Weds aluminum lugnuts This is a set of 16 Weds blue anodized aluminum lugnuts. 12 regular hex nuts, 4 lock nuts. This set is INCOMPLETE as I do NOT have the lock key for them. These would be good for spares or to complete another incomplete set. $20  30mm 5x114.3 bolt-on spacers This is a pair of 5x114.3 30mm bolt-on wheel spacers. The spacers are in good shape, no damage, all the studs are good. A couple of the short lugnuts are missing so you'll have to source them. $40  MOMO Corse horn button This is an AUTHENTIC MOMO Corse horn button. The button is is good shape, only very minor scuffing on the face. $30   Craftsquare style mirrors This is a pair of BRAND NEW Craftsquare style knockoff mirrors. The mirrors are REAL carbon fiber and are in BRAND NEW condition. All hardware and the allen wrenches that came with them are included. SOLD! Blitz BOV W/pipe This is a used, 100% authentic Blitz BOV with the hotpipe adapter. It's in good shape, no issues. Just bolt it on and go! SOLD! 180sx quarter windows This is a set of 180sx quarter windows. The glass is in good shape, co cracks, chips, or pitting. No rubber trim on the windows so you'll have to re-use yours. $100  RSR 3" exhaust This is a RSR 3" catback exhaust, I forget the model name. The exhaust is in good shape overall. Only minor scrapes and a couple minor dents. The center exhaust bracket is bent though. It could be straightened pretty easily, or you could just cut it off as it's not necessary. $200    PBM 15mm spacers This is a pair of 15mm PBM 5x114.3 spacers. The spacers are bolt-on, but the studs are missing. They can be used as slip-on spacers with long wheel studs or you could get some studs for them and bolt them on. The wheel studs are the stock S13 size. $25  Last edited by racepar1; 09-03-2015 at 12:25 AM.. |
|
|
| Sponsored Links |
|
08-27-2015, 07:58 PM
|
#10 | ||
|
Post Whore!
Join Date: Jul 2007
Location: Simi Valley, CA
Age: 41
Posts: 9,006
Trader Rating: (106)
Feedback Score: 106 reviews
|
Quote:
Quote:
|
||
|
|
|
|
| Bookmarks |
|
|
Linear Mode
