|
Tech Talk Technical Discussion About The Nissan 240SX and Nissan Z Cars |
|
Thread Tools | Display Modes |
12-23-2015, 02:35 PM | #1 |
Zilvia Junkie
|
Wheel/Tire Sizes FC RX7
I tried running some 17x9.5 +15 battles up front w 235/40s on stock fenders and I guess I was being a little ambitious as they have a bit too much poke and will rub like crazy at full lock.
What wheel/tire combo are you FC guys up front? Pics would be helpful. Would bumping down to a 17x9 up front rectify the situation or do I need to go narrower still? Sent from my SM-G900V using Tapatalk |
Sponsored Links |
12-23-2015, 03:10 PM | #2 |
Post Whore!
Join Date: Jul 2007
Location: Simi Valley, CA
Age: 41
Posts: 9,006
Trader Rating: (106)
Feedback Score: 106 reviews
|
The width of the wheel will make no difference if you're running the same tire. You need a higher offset. If you would post a pic with a tape measure showing the poke for reference it would likely lead to more helpful replies. This is a Nissan forum, most of us aren't RX7 experts.
|
12-23-2015, 03:14 PM | #3 |
Zilvia Junkie
|
Working on getting pictures, they sit a little better in the rear. They only came in one offset for the 9.5s, the 9 is a +30. I realize it's a Nissan forum, but there are a few rx7 guys lurking around.
Sent from my SM-G900V using Tapatalk |
12-23-2015, 04:15 PM | #5 |
Zilvia Addict
|
running extended ball joints and neg camber will help you fit them but you'll need to pull the fenders a bit still, 17x9+30 would probably wrk better but i guess it depends on wat your trying to do, i run 17x8+5 205/45 25mm extended ball joints and a good amount of neg camber i also have modded knuckles so with the setup i have the inner barrel doesn't hit the sway bar at full lock
|
Bookmarks |
|
|